4 Pin Molex to 6 Pin Video Card GPU Power Supply Cable PCI-E Male Graphics Card Adapter(Pack of 2)
Bottom line: Per its Amazon listing, the 4 Pin Molex to 6 Pin Video Card GPU Power Supply Cable PCI-E Male: A single 4Pin connector supports a maximum of about 54W (12V x 4.5A).
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ A single 4Pin connector supports a maximum of about 54W (12V x 4.5A)
- ✓ Backed by ELFJMZP's warranty and support channels
Cons
- ✗ Needs a free PCIe slot — check which of your board's slots are wired for it
Manufacturer description
This is a 4Pin to 6Pin graphics card power cable for computer power interface conversion, capable of converting a standard large 4Pin (D-type) power connector to a 6Pin PCI-E power connector,providing stable power support for discrete graphics cards that require additional power. The adapter cable is made of 18AWG or 22AWG high-specification copper-core wire,wrapped with flame-retardant PVC insulation, with high temperature resistance up to 80°C to ensure safe and reliable current transmission,as well as oxidation-resistant and bend-resistant characteristics to extend its service life.The…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for 4 Pin Molex to 6 Pin Video Card GPU Power Supply Cable PCI-E Male…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro video adapters & switches category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, confirm the board side: this card needs a free PCIe slot of the width the card uses. Your motherboard manual lists which slots share lanes with M.2 sockets or other slots. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Used to convert the power supply's 4Pin (large D-type) connector to a 6Pin PCI-E connector to provide additional power for discrete graphics cards. Solve the problem that the power supply lacks 6Pin graphics card power supply, avoiding graphics card performance drop or error report due to insufficient power supply. Only for graphics card power supply, not for CPU or other devices (different voltage specification).
- Input: Standard 4Pin (Molex/D-type) male connector, connects to the 4Pin connector of the power supply. Output: 6Pin PCI-E male connector, directly plugged into the graphics card power supply port. Cable: 18AWG or 22AWG copper core cable, PVC insulation, high temperature resistance 80℃, flame retardant and safe.
- A single 4Pin connector supports a maximum of about 54W (12V x 4.5A), which is needed to ensure that the power consumption of the graphics card is within a safe range. Adopt 3-wire transmission design (not missing wire) to ensure stable power supply and reduce the risk of voltage fluctuation. The outer PVC sheath is anti-oxidation and anti-bending to enhance durability.
- Cable length: about 18cm Scenario: suitable for PCI-E graphics cards that require additional 6Pin power supply, compatible with most medium and low power consumption models. Restrictions: High-power graphics cards (such as high-end game cards) are recommended to use the power supply native PCI-E power supply, this adapter cable is only a temporary or auxiliary solution.
- Before using, you need to make sure that the 4Pin connector of the power supply can provide enough power to avoid overloading. When plugging or unplugging, you need to hold the connector tightly to avoid damage caused by violent pulling. Long-term high load operation may affect the stability, it is recommended to upgrade the power supply as a priority (e.g. higher power consumption of the graphics card).
Full Specifications
| Brand | ELFJMZP |
|---|---|
| Gauge | 18 |
| Model | 723508507443 |
| Cable Type | 18awg |
| Unit Count | 2 Count |
| Part Number | EP-00014 |
| Connector Type | 4 Pin Molex to 6 Pin Atx |
| Number of Pins | 10 |
| Maximum Current | 4.5 A |
| Maximum Voltage | 12 volts_of_direct_current |
| Number of Items | 1 |
| Special Feature | 4 Pin Molex to 6 Pin ATX |
| Connector Gender | Male-to-Female |
| Compatible Devices | AMD, ASUS, EVGA, NVIDIA |
| Included Components | NO |
| Indoor Outdoor Usage | Indoor |
| Recommended Uses For Product | Powering Graphics Cards |
| Other Special Features of the Product | 4 Pin Molex to 6 Pin ATX |
Ready to buy?
4 Pin Molex to 6 Pin Video Card GPU Power Supply Cable PCI-E Male Graphics Card Adapter(Pack of 2) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro Video Adapters & Switches
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- OpenAI Says 'Chat Is Dead': Building a Local Agent Rig in 2026
- RTX 5060 8GB vs RTX 4070 12GB for Qwen3 14B: Does 8GB Fit? (2026)
- Best Dorm Room Gaming Setup in 2026: 5 Picks That Fit One Desk
- Best Budget 4K Monitor in 2026: SANSUI vs KOORUI vs ASUS TUF
- NVK Open-Source Vulkan Driver Gains Experimental DLSS on Linux
- Build a Pi Zero 2 W Retro Mini-TV: Full Parts List and Setup
- Best SSD for Gaming and Everyday Builds in 2026
- Intel Bartlett Lake vs i9-13900K: More Cores, Fewer Frames
- NVIDIA RTX A6000 48GB Review: The Workstation Card That Still Owns Local 70B Inference (2026)
- What We Lost When LAN Parties Died: A 2026 Editorial
- GitHub Copilot vs Claude Code vs OpenCode Benchmark 2026
- 4K Gaming PC Build 2026: Cost, Parts, FPS
- Ethernet WiFi Router on a Pi Pico 2W: What's Possible
- Ryzen AI Max+ 395 Motherboard Guide: What You Can Upgrade
- Best SATA SSD for Retro PC Upgrades in 2026
- Glide vs OpenGL vs Direct3D: The PC Gaming API War 1996-2003, Benchmarked
- Linux Now Boots on a Sega Genesis — Here's What That Actually Means
- 256GB microSD Drops to $32 — but for a Game Library, a SATA SSD Still Wins
- Best Budget Gaming Laptops of 2026: Buyer's Guide
- Raspberry Pi Locator Is Shutting Down: How to Find Pi 4 Stock in 2026
- Local LLM Setup in 2026: AMD GPU Guide by Model Size
- Intel Arc B50 for Stable Diffusion: Setup & Performance
- CompactFlash as a Win98 Boot Drive: The 2026 Setup Guide
- Best PC Game Controller in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090