BEEYUIHF Electrical Soldering Flux Paste (10cc Syringe)
Bottom line: The BEEYUIHF Electrical Soldering Flux Paste is a specs-and-price decision rather than a crowd-consensus one in the tools & maintenance category, priced around $6.39 on Amazon as of 2026-10-06. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Backed by BEEYUIHF's warranty and support channels
Cons
- ✗ Check battery runtime and RPM/CFM specs match your case size and cleaning frequency
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks scored BEEYUIHF Electrical Soldering Flux Paste using a rating × review-volume × price-fit model applied to published specs and reviews across the tools & maintenance category. BEEYUIHF's tools & maintenance lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- BEEYUIHF Electronics Soldering Repairs Cleaning Kit, including 1Piece 10cc/10g syringe No-Clean soldering flux paste #9530 and 1 piece 3M/10ft 2.5mm desoldering wick braid. Soldering Flux plus desoldering wick increases mutually activity and speeds up the cleaning of solder joints.
- 【#9530 No-Clean soldering flux paste】The main ingredients are rosin and active agents. Smooth flow tack flux, suitable for cell phone PCB, BGA and other SMD ball array solder joints rework and ball patching.
- 【#2530 Desoldering wick braid】Size: W 0.10'' L 9.8'; width:2.5mm, Length: 3M/10ft; Materials:The Braided Desoldering wicks are made of 100% copper wires with a fine braid design, fast heat conduction, suitable for rapid tin suction, not only improving work efficiency and quality, but also more clean.
- Desoldering wick and solder flux utilize each other's properties to complement each other, and flux can double the effectiveness of the tape for brilliant soldering and rework results.
- BEEYUIHF brand flux and solder wick soldering kit, suitable for electronic soldering, repair and rework. All-round cleaning of PCB boards and solder joints, suitable forelectronic components soldering, SMT repair, BGA chip, etc.
Full Specifications
| Brand | BEEYUIHF |
|---|---|
| Weight | 10g |
| Power Source | hand_powered |
| Batteries Included? | No |
| Batteries Required? | No |
| Included Components | No-Clean Soldering Flux Paste (10mL Syringe) with 3M/10ft 2.5mm Desoldering wick Braid |
| Full listing title | Electrical Soldering Flux Paste (10cc Syringe) with Desoldering wick Braid (3M/10ft 2.5mm) for Electronics Soldering Repairs Remover Kit |
Ready to buy?
Electrical Soldering Flux Paste (10cc Syringe) with Desoldering wick Braid (3M/10ft 2.5mm) for Electronics Soldering Repairs Remover Kit is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Raspberry Pi LLM Projects: What Actually Runs in 2026
- AMD Instinct MI300X vs Consumer GPUs: What Local AI Builders Should Buy in 2026
- OpenAI Codex Now Repeats Tasks From One Demo: Can a Local RTX 3060 Agent Match It?
- gpt-oss 20B vs Phi-4 14B on a 12 GB GPU: Which One Actually Fits?
- Qwen-Image vs ERNIE vs FLUX.2 Dev: RTX 5090 Style Test
- Building multi-agent AI orchestrators — LangGraph, DSPy, n8n, and picking the right one
- ASUS ProArt PA27USD Lands: 27-Inch OLED Aims at Gaming
- Local AI News You Missed in April 2026
- Hyperscalers May Soon Outrun Their Cash Flow on AI Buildout
- How LAN Parties Died: A 2002-2008 Cultural Retrospective
- Hy3-Preview vs DeepSeek V4 Flash: Where the New Open-Weights Model Actually Lands
- Best GPU for Gemma 3 27B in 2026: Where 12 GB Stops Being Enough
- Is 12GB VRAM Still Enough for Local LLMs in 2026?
- Microsoft's SkillOpt Boosts GPT-5.5 With Just a Trained Markdown File
- Best Budget Gaming Peripherals Under $50 in 2026
- LongCat-2.0: A Frontier Model Trained Without Nvidia GPUs
- RTX 3060 12GB for 1080p 240Hz Esports: CS2, Valorant, Apex
- Qwen 3.6 35B on RTX 3060 12GB: 18–28 tok/s
- Raspberry Pi OS Moves to Linux 6.18 LTS: What Changes for Pi Builders
- 8BitDo Pro 2 vs GameSir G7 SE vs DualSense: the best PC controller for retro emulation in 2026
- CompactFlash Boot Drive for Windows 98 Retro PC: The 2026 Transcend CF133 Recipe
- How to run Llama 3.1 8B on Arc B580
- Gemma 4 31B Abliterated on a Single RTX 3060 12GB: Quantization, VRAM, and Real Tok/s
- Best Budget 4K Gaming Monitor Under $400 in 2026: SANSUI vs KOORUI Mini-LED
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090