Thermalrlght ARGB and Fan HUB X12 IR Black
Bottom line: The Thermalrlght ARGB and Fan HUB X12 IR Black is a specs-and-price decision rather than a crowd-consensus one in the rgb & lighting category, priced around $9.52 on Amazon as of 2026-11-20 11:30 UTC. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Before you buy
- Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Thermalrlght ARGB and Fan HUB X12 IR Black, so this read rests on the manufacturer's listed specs and the current price in the rgb & lighting category (how we evaluate). Compare with similarly-priced alternatives in the rgb & lighting category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- [Stable Output] The ARGB and FAN Hub X12 IR series are SATA power direct outputs that maintain stable output under high loads. SATA wire is purchased by yourself and is not included with this product.
- [Easy Installation] The included soft magnetic adhesive can be attached to the back of the Hub to adsorb and fix it in a suitable chassis position, which is simple to install, concise, safe and secure
- [Technical details] This product has a red interface for PWM speed recognition interface, due to the limitation of the PWM motherboard IC reading principle, only the speed of a single fan plugged into the red interface is recognized
- [Beautiful appearance] Small size, with a linear ARGB on the top surface, the overall black, can realize PWM fan synchronization and ARGB light synchronization. Included light remote control for easy control of light color.
- [Specifications] Model: FAN and ARGB HUB X12 IR Black, size: 108x50x21mm, material: plastic, color: black, cable length: 500mm, easy to solve the situation of insufficient ARGB lighting interface and fan power supply interface of the motherboard
Full Specifications
| Brand | THERMALRLGHT |
|---|---|
| Color | Black |
| Material | Plastic |
| Dimensions | 108x50x21mm |
| Unit Count | 1 Count |
| Part Number | Fan HUB X12 IR BLACK-D3 |
| Material Type | Plastic |
| Number of Items | 1 |
| Number of Packs | 1 |
| Included Components | USB splitte |
| Item Dimensions L x W x H | 4.25"L x 4.25"W x 0.83"H |
| Full listing title | Thermalrlght ARGB and Fan HUB X12 IR Black,12-Port 4Pin PWM Fan Controller,5V-3pin ARGB,Supports 12 Fan Interface Connections and Comes with A Remote Control for Lighting, Without Sata Cable Included |
Ready to buy?
Thermalrlght ARGB and Fan HUB X12 IR Black,12-Port 4Pin PWM Fan Controller,5V-3pin ARGB,Supports 12 Fan Interface Connections and Comes with A Remote Control for Lighting, Without Sata Cable Included is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related RGB & Lighting
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- CompactFlash as a Hard Drive: The Win98 Retro Storage Guide
- The Truth About Sega's TradeMark Security System (TMSS)
- RTX 5090 vs RX 7900 XTX — does AMD still matter?
- Claude Now Writes 65% of Anthropic's Code: The Local Coding-Rig Angle
- Local AI Image Generation: Best AMD GPUs for 2026
- 8BitDo Pro 2 vs GameSir G7 SE vs DualSense: the best PC controller for retro emulation in 2026
- Self-Host NextCloud on a Raspberry Pi 4 8GB: A Complete Private-Cloud Build for 2026
- Can a Ryzen 5 5600G Run Local LLMs With No GPU? CPU + iGPU Inference Tested
- Best Wired Headset for PlayStation Cross-Play Cross-Platform Voice Chat (2026)
- Retro Game Emulator for TV: 2025 Setup & GPU Guide
- Ryzen AI Max+ 395 LLM Performance: What to Expect
- Best Internal SSDs Under $100 in 2026
- VRAM calculator: what can you actually run on your GPU?
- Voodoo3 3000 Won't POST: Troubleshooting a 1999 Build in 2026
- GLM-5.2 Review: Running the Top Open-Weights LLM on an RTX 3060
- RetroPie Handheld 3D Print Guide: Cases, Settings & Parts
- Dual Radeon AI PRO R9700 Workstation: 64 GB Local LLM Build
- pxpipe Cuts Claude Code Token Costs Up to 70%: How It Works, When to Go Local
- Gemma 4 31B on a 16GB GPU: RTX 5060 Ti vs RX 9060 XT vs Arc A770 Quant Table (2026)
- Building a 1999 GeForce 256 + Pentium III Win98 Rig in 2026
- How nVidia Killed 3dfx — and Why Voodoo Still Haunts Every GPU Launch
- DFlash Speculative Decoding on Qwen3.5-35B-A3B: How an RTX 2080 Super 8GB Hits 60+ tok/s
- GLM-5.2 Local: What GPU Actually Runs the Top Open-Weights LLM
- A LEGO Castle Case for the Raspberry Pi 5 Is Going Viral — Here's the Build
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090