Diomart Under Cabinet Lighting Wireless, RGB LED Closet Lights, 4 Pack
Bottom line: The Diomart Under Cabinet Lighting Wireless: Motion sensor triggers within 10ft and auto-offs after ~20 seconds of no motion; main trade-off: remote gets laggy when one controller drives several bars at once.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Motion sensor triggers within 10ft and auto-offs after ~20 seconds of no motion
- ✓ 15 RGB colors plus 3000K/4500K/6000K whites, all switchable by remote
- ✓ Type-C recharge in 2 hours; 10-15 days runtime in motion mode at 3-5 trips/day
- ✓ Magnetic backing plus adhesive plates mount it with no screws or tools
Cons
- ✗ Remote gets laggy when one controller drives several bars at once
- ✗ Only 5-6 hours of runtime at 100% brightness in always-on mode
- ✗ Default 120-minute timer shuts lights off unless you press CANCEL
- ✗ Adhesive plates need a flat, dry surface; textured cabinets need the magnet route
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Diomart Under Cabinet Lighting Wireless, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the rgb & lighting category before committing. On the listing's own facts, the case for it is "Motion sensor triggers within 10ft and auto-offs after ~20 seconds of no motion"; the main trade-off is "Remote gets laggy when one controller drives several bars at once". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, load rating and mounting or device compatibility in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Motion & Daylight Sensor: With 2 Sensor Modes, Night Mode and Day Mode. Switch the light to the "SENSOR" position, the lights flash once, activating night sensor mode. Lights flashes twice, activating daytime sensor mode. They can detect the motion of human in the dark or daytime. Automatically open within 10ft/120, automatically shut down after about 20 seconds after no motion is detected. The under cabinet lights are suitable as closet lights, wine cabinets lights, and display lighting
- Remote Control & Dimmable & Timing: Turn on/off, adjust brightness (5 brightness levels), switch LED lights color, set timer to turn off lights automatically by 30/60/90 minutes. One remote controller can control several LED closets lights at the same time. NOTE: LED cabinet lights comes with a Default Timer, Light will turn off automatically after 120 minutes if there is no extra timer setting. Press "CANCEL" to cancel all timer setting, lights work until battery runs out
- Color Changing LEDs: 15 Colors & 4 Lighting Modes by remote control. In remote control mode, you can choose 12 color or 3 preset color warm/white (3000K/6000K/4500K) as you like by remote control, fade, flash, smooth and strobe mode also can be set. It cycles through 12 different colors gradually in the SMOOTH mode. Tips: When the remote controls multiple lights at the same time, there may be a problem of response delay. You can use the remote to control the lights at close range
- Type C Charging: LED closet lights utilizes widely compatible Type-C interface to charge the built-in rechargeable Li-ion battery. It takes 2 hours to fully charge. After full charged, it can be last about 5-6 hours in 100% brightness at always on mode. And it can be last 10-15 day at motion sensor mode (when LED lights are activated 3-5 times per day)
- Easy Installation & Widely Application: Under counter light is convenient to install in seconds. Comes to you with stick able metal sheets and built-in strong magnet, you can easily attach the light bars on any ironworks, or peel off the double-sided tape to stick lights on any flat (dry) surfaces. Wireless installation, no tools, no screws. Suitable lighting for home shoes box shelf pantry bathroom basement entryway gun and other tight space where need lighting without messy unsafe cords
- Package Contents: 4 x Motion Sensor Under Cabinet lights, 4 x usb cable, 8x adhesive plate, 1 x user manual. Any question during use please let us know in buyer center, we are sure you can get satisfied reply
Full Specifications
| Brand | Diomart |
|---|---|
| Color | Multicolor |
| Voltage | 3.7 volts |
| Wattage | 1 watts |
| Lamp Type | Under Cabinet Light |
| Room Type | Kitchen |
| Style Name | 4 Pack |
| Unit Count | 4 Count |
| Finish Type | Polished |
| Shade Color | Multicolor |
| Switch Type | Remote |
| Connectivity | Wireless, USB |
| Finish Types | Polished |
| Model Number | 8125-4Pack |
| Power Source | Battery Powered |
| Compatibility | Switch |
| Is Waterproof | false |
| Material Type | Plastic |
| Mounting Type | Magnetic and Adhesive |
| Control Method | Remote |
Ready to buy?
Diomart Under Cabinet Lighting Wireless, RGB LED Closet Lights, 4 Pack is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related RGB & Lighting
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Period-Correct 1999 LAN Rig: Pentium III, Voodoo3 3000, Sound Blaster
- Best Wireless Keyboard for Office and Hybrid Work in 2026
- vLLM on a Single RTX 3060 12GB: Batched Serving Numbers and When It's Worth It (2026)
- Jellyfin NVENC Transcodes + a Local LLM on One RTX 3060 12GB
- Thinking Machines Drops Inkling, a 975B Open Model Leading US Labs
- Running Qwen 3.6 27B on a Single RTX 3060 12GB: Quantization, Context, and Real Tok/s
- AMD Ryzen AI Mini PC vs a DIY RTX 3060 Build for Local LLMs
- Ryzen 7 9800X3D Hits Record-Low Price — What It Means for AM4 Upgraders
- AA-AgentPerf: What the New Agentic Benchmark Means for Local Coding Rigs
- Raspberry Pi LLM Cluster: What It Can (and Can't) Do
- Best Raspberry Pi Projects for Beginners in 2026
- Air vs AIO for the Ryzen 7 5800X: Noctua NH-U12S vs CoolerMaster ML240L
- Best SATA SSD for Gaming and Console Upgrades in 2026
- Crucial BX500 vs Samsung 970 EVO Plus: SATA vs NVMe Boot Drive
- Blue Yeti vs HyperX QuadCast 2 S: Best USB Mic for Streaming
- Raspberry Pi Projects for Beginners: 6 No-Solder Builds
- Gemma 4 12B Runs Local: Best 12GB GPUs for Google's New Open Model
- Raspberry Pi 4 8GB Cyberdeck Build: A Practical 2026 Parts Guide
- Best Budget Gaming Peripherals Under $50 in 2026
- Qwen3.7-Plus vs Gemma 4 12B for Local Agents on a 12GB GPU
- Microsoft's Copilot Goes Agentic — Run Your Own Agent Locally on an RTX 3060
- MSI MPG 322UR QD-OLED X24: 4K 240Hz Performance Analyzed
- Ryzen 5 5600G vs Core i7-9700K for a Budget 1080p Gaming Build
- Gemini-Class Models on Local Hardware: How Much VRAM You Actually Need
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090