uxcell 15Pcs Male to Female Thread Spacer Screws
Bottom line: The uxcell 15Pcs Male to Female Thread Spacer Screws is a specs-and-price decision rather than a crowd-consensus one in the tools & maintenance category, priced around $4.74 on Amazon as of 2026-10-06. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Backed by uxcell's warranty and support channels
Cons
- ✗ Check battery runtime and RPM/CFM specs match your case size and cleaning frequency
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks scored uxcell 15Pcs Male to Female Thread Spacer Screws using a rating × review-volume × price-fit model applied to published specs and reviews across the tools & maintenance category. uxcell's tools & maintenance lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- What You Get - Package comes with 15 pieces of male to female thread spacer screws. Size: M2.5 x 25mm/M2.5 x 0.98inch(D*W), Hex Spacer Width: 4.5mm/0.18inch, Male Thread Length: 6mm/0.24inch, Pitch: 0.45mm. Please measure the required length of the project first and choose the appropriate hexagonal standoff screws
- Material - Hexagonal screws are made of brass, which are strong, stable and durable. They are characterized by high hardness, rust resistance and corrosion resistance, deep threads, and good tightening effect
- Hexagonal Design - The male-to-female threaded spacers adopt a hexagonal design as a whole, which is easy to grip and can reach the maximum torque, allowing you to tighten easily and efficiently. This design can keep the height of the circuit board consistent, preventing it from bending, twisting, and short-circuiting
- Easy to Install - The installation process is very simple. Just choose a hexagonal stud bracket of the appropriate length, then install it on the required circuit board or other project, and tighten it to complete the installation
- Wide Application - Hexagonal fasteners are very suitable for installation between PCB circuit boards and machine boards. They are suitable for electronic boards such as drone quadcopters, computers, and circuit boards. They are also suitable for furniture projects, electronic workbenches, drone motherboard placement, etc
Full Specifications
| Size | M2.5 x 25mm + 6mm |
|---|---|
| Brand | uxcell |
| Color | Gold |
| Part Number | a25042100ux1703 |
| Included Components | false |
| Item Package Quantity | 15 |
| Full listing title | uxcell 15Pcs Male to Female Thread Spacer Screws, M2.5 x 25mm + 6mm Brass Hex Standoff Screws PCB Motherboard for Drone Quadcopter, Computer and Circuit Board |
Ready to buy?
uxcell 15Pcs Male to Female Thread Spacer Screws, M2.5 x 25mm + 6mm Brass Hex Standoff Screws PCB Motherboard for Drone Quadcopter, Computer and Circuit Board is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Gaming PC Upgrades Under $200 in 2026: 5 Picks That Move the Needle
- Logitech G920 vs HORI Racing Wheel: Best First Sim Wheel?
- Best GPU for Local Stable Diffusion Under $400: Why the RTX 3060 12GB Still Wins
- CompactFlash vs SATA SSD via IDE Adapter for Retro PC Storage
- Noctua NH-U12S vs DeepCool AK620 for Ryzen Overclocking: Air-Cooler Showdown
- Which Open LLMs Actually Handle Tool-Calling on an RTX 3060?
- Home Assistant on a Raspberry Pi 4 8GB in 2026: SSD Boot, Power Draw, Performance
- AOOSTAR MACO 6850H as a Proxmox 9 Home Server
- A LEGO Castle Case for the Raspberry Pi 5 Is Going Viral — Here's the Build
- VibeThinker-3B: A 3B Reasoning Model on RTX 3060 and Raspberry Pi 4
- Best GPU for 1440p Local Image Generation in 2026: Why the RTX 3060 12GB Still Wins on Value
- Ring Light vs LED Strips: What Actually Fixes a Grainy Webcam
- Self-Hosting Immich on a Raspberry Pi 4 8GB: Power and Performance
- Best Wired Controller for Fighting Games on PC (2026)
- RTX 3060 12GB for 1080p 240Hz Esports: CS2, Valorant, Apex
- What PC Specs Do Big YouTubers Actually Run in 2026?
- Noctua NH-U12S vs DeepCool AK620 vs ML240L: Best Cooler for a Ryzen 7 5800X
- Qwen 3.6 27B with MTP: 2.5x Throughput on Local Hardware (Real Benchmarks)
- Best Internal SSDs Under $100 in 2026
- Run Qwen 3.6 27B Locally: What Fits on 12GB in 2026
- 1440p High-Refresh vs 4K for Gaming in 2026: ASUS TUF 27" QHD vs SANSUI/KOORUI 4K
- Best Raspberry Pi 5 Starter Kits and Accessories for Home Lab Builds (2026)
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5070
- Build a Raspberry Pi Retro Handheld in 2026: Parts and Setup
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090