uxcell 25Pcs Male to Female Thread Spacer Screws
Bottom line: The uxcell 25Pcs Male to Female Thread Spacer Screws is a specs-and-price decision rather than a crowd-consensus one in the tools & maintenance category, priced around $7.79 on Amazon as of 2026-10-21 04:30 UTC. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Backed by uxcell's warranty and support channels
Cons
- ✗ Check battery runtime and RPM/CFM specs match your case size and cleaning frequency
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks scored uxcell 25Pcs Male to Female Thread Spacer Screws using a rating × review-volume × price-fit model applied to published specs and reviews across the tools & maintenance category. uxcell's tools & maintenance lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- What You Get - Package comes with 25 pieces of male to female thread spacer screws. Size: M3 x 20mm/M3 x 0.79inch(D*W), Hex Spacer Width: 4.5mm/0.18inch, Male Thread Length: 6mm/0.24inch, Pitch: 0.5mm. Please measure the required length of the project first and choose the appropriate hexagonal standoff screws
- Material - Hexagonal screws are made of brass, which are strong, stable and durable. They are characterized by high hardness, rust resistance and corrosion resistance, deep threads, and good tightening effect
- Hexagonal Design - The male-to-female threaded spacers adopt a hexagonal design as a whole, which is easy to grip and can reach the maximum torque, allowing you to tighten easily and efficiently. This design can keep the height of the circuit board consistent, preventing it from bending, twisting, and short-circuiting
- Easy to Install - The installation process is very simple. Just choose a hexagonal stud bracket of the appropriate length, then install it on the required circuit board or other project, and tighten it to complete the installation
- Wide Application - Hexagonal fasteners are very suitable for installation between PCB circuit boards and machine boards. They are suitable for electronic boards such as drone quadcopters, computers, and circuit boards. They are also suitable for furniture projects, electronic workbenches, drone motherboard placement, etc
Full Specifications
| Size | M3 x 20mm + 6mm |
|---|---|
| Brand | uxcell |
| Color | Gold |
| Part Number | a25042100ux1707 |
| Included Components | false |
| Item Package Quantity | 25 |
| Full listing title | uxcell 25Pcs Male to Female Thread Spacer Screws, M3 x 20mm + 6mm Brass Hex Standoff Screws PCB Motherboard for Drone Quadcopter, Computer and Circuit Board |
Ready to buy?
uxcell 25Pcs Male to Female Thread Spacer Screws, M3 x 20mm + 6mm Brass Hex Standoff Screws PCB Motherboard for Drone Quadcopter, Computer and Circuit Board is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- Homelab Month One: Raspberry Pi 4 or a Ryzen 5 Mini-PC?
- Build a Magic Mirror 2 Smart Home Hub (2026)
- Mistral Robostral Navigate: An 8B Model Steers Robots From One Camera
- Microsoft's SkillOpt Boosts Models With Just a Markdown File — What It Means for Your Local RTX 3060 Rig
- Fix Windows 98 SE on 1GB+ RAM: The Vcache Gotcha
- Sound Blaster G6 in a Period-Correct WinXP Build: Modern USB DAC Meets Vintage Hardware
- Ryzen 7 5800X3D vs Core i7-14700K: The 2026 DDR4 Value Fight
- Turtle Beach Recon 50 vs BERIBES: Best Budget Gaming Headset Under $40?
- Llama.cpp Console Released: What Changes for Local LLM Operators on a 12GB GPU
- GeForce 4 Ti 4600 AGP in a Windows XP Build: Drivers, Gotchas and Benchmarks
- AMD Ryzen 7 7700X3D Lands as a Newegg Exclusive at $329
- Intel Arc B50 for Stable Diffusion: Setup & Performance
- Reve 2.0 Debuts at #2: Can You Run Competitive Image Models on an RTX 3060 12GB?
- Should You Overprovision vCPU Per VM in a Homelab?
- Legion Go vs Steam Deck vs ROG Ally: 2026 Buying Guide
- Sound Blaster Audigy FX vs Sound Blaster Live! for Period-Correct Win98 Builds
- Best Budget 4K Monitor in 2026: SANSUI vs KOORUI vs ASUS TUF
- Best Capture Setup for Console Streaming in 2026: Elgato Cam Link 4K + PS4 Pro
- Sound Blaster Audigy 2 ZS vs Sound Blaster Live! on Windows 98: Which Wins for Late-90s Gaming?
- Anthropic Tightens Claude Fable 5 Limits — Why Builders Are Eyeing Local Rigs
- Intel Optane DIMMs Run 1-Trillion-Parameter LLM on One Workstation
- Best 2.5" SATA SSD to Upgrade a PS4 Pro in 2026
- Stable Diffusion vs Flux — which open image model wins in 2026?
- Lemonade v10.5.1: an MTP + ROCm 7.13 quick start for Strix Halo
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090