GBA-SZC 4010 Fan DC 12V
Bottom line: Per its Amazon listing, the GBA-SZC 4010 Fan DC 12V: size: 40mm × 40mm × 10mm (L × W × H); rated Voltage: 12V DC.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Size: 40mm × 40mm × 10mm (L × W × H)
- ✓ Rated Voltage: 12V DC
- ✓ Backed by GBA-SZC's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
After-sales guarantee: each defective item can be replacement for free or refund.If any question, please feel free to contact us,GBA-SZC is committed to providing you with the best service!Package Includes:12V 4010 Axial Fan*2Extension Wire*2
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for GBA-SZC 4010 Fan DC 12V, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the handheld consoles category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【Product Parameters】 Size: 40mm × 40mm × 10mm (L × W × H). Bearing Type: Dual Ball Bearings. Rated Voltage: 12V DC. Current: 0.12A. Noise Level: 26 dB. Speed: 7000 RPM. Airflow: 8.1 CFM. Cable Length: 130 cm (Original wire: 30 cm + Extension wire: 100 cm). Connector: XH2.54 2-pin.
- 【Durability】Equipped with high-quality pure copper coil dual ball bearings, this fan ensures stable operation even at high speeds of 7000 RPM, with a service life of up to 60,000 hours. The excellent dynamic balance design keeps noise levels as low as 26 dB, providing efficient heat dissipation while maintaining a quiet working or entertainment environment.
- 【Efficient Cooling】 With a maximum airflow of up to 8.1 CFM, this fan effectively draws away heat and reduces the core temperature of devices. Its low operating current of 0.12A ensures exceptional cooling performance with minimal power consumption.
- 【Stable Performance】The brushless DC motor technology eliminates the risk of spark interference, while also delivering lower energy consumption, a longer lifespan, and more stable performance. This ensures reliable and continuous operation over extended periods.
- 【Wide Compatibility】This fan is an ideal choice for 3D printers, routers, server cooling systems, gaming consoles, and other small electronic devices.
Full Specifications
| Brand | GBA-SZC |
|---|---|
| Wattage | 1.44 watts |
| Unit Count | 2.0 Count |
| Noise Level | 26 Decibels |
| Part Number | 1 |
| Cooling Method | forced air |
| Number of Items | 1 |
| Air Flow Capacity | 8.1 Cubic Feet Per Minute |
| Compatible Devices | 3D Printers, Routers, Server Cooling Systems, Small Electronic Devices |
| Power Connector Type | 2-Pin |
| Maximum Rotational Speed | 7000 RPM |
| Item Dimensions L x W x H | 1.57"L x 1.57"W x 0.39"H |
| Full listing title | 4010 Fan DC 12V,40mm x 40mm x 10mm Dual Ball Bearing Low Noise Brushless Cooling Axial Fan for 3D Printers Extruder Hotend.(2PCS) |
Ready to buy?
4010 Fan DC 12V,40mm x 40mm x 10mm Dual Ball Bearing Low Noise Brushless Cooling Axial Fan for 3D Printers Extruder Hotend.(2PCS) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Used RTX 3090 vs New GPU for Local LLMs: 2026 Reddit Consensus
- Best Gaming Mouse Pad for Esports and Productivity (2026)
- Troubleshooting Local LLM Inference on Raspberry Pi 4 8GB and Pi 5: OOM, Swap, Quantization Crashes, and…
- Best Hardware for Running MoE LLMs Locally in 2026
- 180Hz 1440p Monitors Hit Entry Pricing — Here's How the 4K Tier Compares
- Can a Raspberry Pi 4 8GB Run Local LLMs in 2026?
- MTP in llama.cpp: The Regression, the Fix, and the KV-Cache Free Lunch
- Raspberry Pi 5 16GB for Local LLMs: What Models Actually Fit?
- Best CPU Cooler for Gaming PCs in 2026: Air & AIO Picks
- Gemini 3.6 Flash vs 3.5 Flash-Lite: Cloud Tier or Local RTX 3060?
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- Claude Fable 5: Anthropic Admits 'Wrong Tradeoff' on Throttling
- Building a Silent Windows 98 PC with a CompactFlash Boot Drive
- Samsung Winds Down Chip Production Six Days Before Strike: What Memory Buyers Should Do Right Now
- Best Home Office Monitor Under $200 (2026)
- 2002 GeForce 4 Ti Win98 Build: CompactFlash Storage Done Right
- Self-Host Home Assistant on a Raspberry Pi 4 8GB: Setup and Real Limits
- Best Wireless Streaming Microphones for Twitch in 2026
- Intel Eyed as TSMC Backup by Google and Nvidia for AI Chips
- $100 CPU Shootout: Ryzen 5 5500 vs Core i3-14100F vs i3-12100F
- Best Mouse and Mousepad for FPS in 2026: G502 Hero + SteelSeries QcK
- Wooden CPU Cooler: How to Build One and What to Expect
- Best CPU Cooler for the Ryzen 7 5800X: Air vs 120mm vs 240mm AIO
- RTX 3060 12GB vs RX 7600 XT for Local LLMs: The Cheap Inference Card to Buy in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090