DIYPC
DIYPC IDX1-BK-ARGB Black USB3.0/ Type C Tempered Glass ATX Gaming Computer Case w/Dual Tempered Glass Panel and 3 x ARGB PWM Fans (Pre-Installed)
Status: DIYPC IDX1-BK-ARGB Black USB3.0/ Type C Tempered…: Unavailable on Amazon as of . SpecPicks has no in-stock listing with matching specs on file; the search below lists current offers. eBay sellers may still list this model new or used.
Bottom line: The DIYPC IDX1-BK-ARGB Black USB3.0/ Type C Tempered Glass ATX Gaming is a specs-and-price decision rather than a crowd-consensus one in the pc cases category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Currently unavailable on Amazon. Not the same product — 3 in-stock alternatives:
Similar: DIYPC DIY-mATX06-Wood Black USB3.0 /Type C Micro… — $67.98 on Amazon as of 2026-10-06 22:21 UTC (price may vary).
Similar: DIYPC DIY-ATX08-Wood Black USB3.0 /Type C ATX… — $74.94 on Amazon as of 2026-10-06 22:21 UTC (price may vary).
Similar: Bgears b-BlackWidow-RGB Black Gaming PC ATX case — $49.99 on Amazon as of 2026-10-07 04:18 UTC (price may vary).
Pros & Cons
Pros
- ✓ Motherboard Compatibility: Supports ATX, Micro ATX, and ITX motherboard
- ✓ Backed by DIYPC's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
DIYPC IDX1-BK-ARGB Black USB3.0/ Type C Tempered Glass ATX Gaming Computer Case w/ Dual Tempered Glass Panel and 3 x ARGB PWM Fans (Pre-Installed)
SpecPicks Verdict
SpecPicks scored DIYPC IDX1-BK-ARGB Black USB3.0/ Type C Tempered Glass ATX Gaming… using a rating × review-volume × price-fit model applied to published specs and reviews across the pc cases category. DIYPC's pc cases lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for pc cases of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Motherboard Compatibility: Supports ATX, Micro ATX, and ITX motherboard
- 9 Fans Capability (2 x 120mm ARGB Reverse Blade PWM Fan x MB side, 1 x 120mm ARGB PWM Fan x rear pre-installed) Provide Great Cooling and Gaming Performance
- Water Cooling Ready – Top Support 360mm AIO
- 2 Ways to Control RGB Fan Lighting: Either by Manual RGB LED Button on Top I/O Panel; or SYNC w/your Motherboard to control RGB lighting w/ARGB 5V/3 Pin Header. PWM ARGB Fan Hub Included
- Advanced Cable Management Design – Routing the main cable is easy and quick through a hidden channel. There is a large space behind the motherboard for all cables, making the case a clean and beautiful look
Full Specifications
| Brand | DIYPC |
|---|---|
| Color | Black |
| Material | Tempered Glass |
| Case Type | Full Tower |
| Model Name | IDX1-BK-ARGB |
| Unit Count | 1.0 Count |
| Model Number | IDX1-BK-ARGB |
| Cooling Method | Air, Water |
| Mfr Part Number | IDX1-BK-ARGB |
| Special Feature | RGB Lighting |
| Antenna Location | Gaming |
| Compatible Devices | ATX, Micro ATX, ITX motherboards, various cooling systems (up to 9 fans, water cooling ready), full tower case compatible components |
| Enclosure Material | Tempered Glass |
| Warranty Description | 1 Year |
| Supported Motherboard | ATX, Micro ATX, Mini ITX |
| Motherboard Compatability | ATX, Micro ATX, Mini ITX |
| Motherboard Compatibility | Supports ATX, Micro ATX, and ITX motherboard |
| Recommended Uses For Product | Gaming |
| 2 Ways to Control RGB Fan Lighting | Either by Manual RGB LED Button on Top I/O Panel; or SYNC w/your Motherboard to control RGB lighting w/ARGB 5V/3 Pin Header. PWM ARGB Fan Hub Included |
| Other Special Features of the Product | RGB Lighting |
Ready to buy?
DIYPC IDX1-BK-ARGB Black USB3.0/ Type C Tempered Glass ATX Gaming Computer Case w/Dual Tempered Glass Panel and 3 x ARGB PWM Fans (Pre-Installed) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related PC Cases
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Asus ProArt PA27USD OLED Lands — and What 4K Gamers Can Buy for Less
- Best Budget Streaming Mic + Capture Setup: Blue Yeti vs HyperX QuadCast 2 S
- Crucial BX500 vs SanDisk SSD Plus vs WD Blue: Best Budget SATA SSD for a Boot Drive
- RTX 5070 vs 5080: Which GPU Fits Your Build?
- Transcend CF133 CompactFlash as a Win98 Boot Drive: Speed Tests, Compatibility, and the Adapter That…
- Kimi K3 Sold Out the Cloud — Can You Run It Locally?
- RTX 3060 12GB vs Intel Arc B580 for Stable Diffusion
- China Mobile JT-4.1 Flash 236B: A Token-Efficient MoE and What It Takes to Self-Host
- Raspberry Pi 5 8GB Review: Specs, Price & Use Cases (2025)
- Best Plug-and-Play Retro & Budget Consoles in 2026: 5 Picks Ranked
- Ryzen AI Max Mini PC 128GB: Specs, Uses, Alternatives
- Best GPU for 1440p Local Image Generation in 2026: Why the RTX 3060 12GB Still Wins on Value
- MiniCPM5-1B: The 1B Model That Beats Reasoning Peers by Knowing When to Shut Up
- Intel Arc A770 16GB for Local LLMs: 2025–2026 Guide
- Raspberry Pi Zero W vs Pi 4 for a 2026 Cyberdeck: Which Board Fits?
- Sound Blaster G6 on a Modern Retro Build: When a USB DAC Beats an AWE32
- GeForce FX 5900 Ultra Period-Correct WinXP Build Guide: Driver Hunt, Half-Life 2 Mixed-Mode, and Doom 3…
- Best Controller for PC Gaming in 2026: GameSir G7 SE vs DualSense vs HORI
- 3D-Printed Retro PC Case Fits ITX Board, ATX PSU
- Best Upgrades to Revive an Old Gaming PC in 2026: 5 Picks
- Local AI Image Generation: Best AMD GPUs for 2026
- Q4_K_M Is Fine for Chat, a Trap for Agents: KV Cache Quant Math for Local Coding
- AMD Ryzen 7 5800X3D Re-Review Shows DDR4 Still Has Gaming Legs in 2026
- Best Controller for Emulation and Fighting Games in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090