XRDS -RF CB Coax Cable 50FT
Bottom line: The XRDS -RF CB Coax Cable 50FT: 50 ft RG8X run with enough length for mast, roof or marine antenna routing; main trade-off: listing gives no attenuation spec (dB per 100 ft) to compare against other coax.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 50 ft RG8X run with enough length for mast, roof or marine antenna routing
- ✓ Pure copper center conductor for low-loss RF signal transfer
- ✓ Double shielding (braid + foil) helps keep interference out
- ✓ Nickel-plated PL-259 and FME connectors resist corrosion outdoors
- ✓ Includes FME male to PL-259 adapter, so you can use two connector setups
Cons
- ✗ Listing gives no attenuation spec (dB per 100 ft) to compare against other coax
- ✗ No maximum power rating stated, so check it before running a high-watt amp
- ✗ RG8X is thinner than full-size RG-8 or RG-213, with more loss on long runs
- ✗ 50 ft is more than most vehicle installs need, so you may have slack to coil up
SpecPicks Verdict
SpecPicks scored XRDS -RF CB Coax Cable 50FT using a rating × review-volume × price-fit model applied to published specs and reviews across the cables & connectors category. XRDS -RF's cables & connectors lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for cables & connectors of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Low-Loss RG8X Coax Cable – Built with a pure copper conductor and double shielding (braid + foil), this CB coax cable ensures strong signal transmission and minimal signal loss for high-performance RF applications.
- Durable Nickel-Plated Connectors – Features corrosion-resistant UHF PL-259 and FME connectors for a secure, long-lasting fit, ideal for both indoor and outdoor environments.
- Versatile Connection Options – Comes with an FME Female to PL-259 Male cable and an additional FME Male to PL-259 Male adapter, offering multiple configurations for your antenna or radio setup.
- Flexible & Ready to Use – The soft PVC outer jacket makes installation easy, even in tight spaces. Professionally assembled and tested for reliable, plug-and-play performance.
- Wide Device Compatibility – Compatible with CB radios, ham radios, marine antennas, GPS units, and RF communication devices from brands like Midland, Uniden, Cobra, and Kenwood.
Full Specifications
| Brand | XRDS -RF |
|---|---|
| Color | Silver |
| Model | B0FY576N39 |
| Cable Type | RG8X |
| Unit Count | 50 Feet |
| Item Length | 50 feet |
| Part Number | RG8X-UHF-FME-50FT |
| Connector Type | Uhf |
| Number of Pins | 2 |
| Number of Items | 1 |
| Special Feature | light |
| Connector Gender | Female-to-Male, Male-to-Male |
| Compatible Devices | CB Radio, Ham Marine Antenna, GPS Unit, RF Communication Device |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Compatible Phone Models | No Compatible Phone Models |
| Recommended Uses For Product | Home Theater, Audio/Video Connection |
| Other Special Features of the Product | light |
| Full listing title | CB Coax Cable 50FT, RG8X FME Female to UHF PL-259 Male with FME Male to PL-259 Adapter, Low Loss RF Coaxial Cable for Antenna, CB Radio, Ham Radio, Marine, Mobile, and GPS Systems |
Ready to buy?
CB Coax Cable 50FT, RG8X FME Female to UHF PL-259 Male with FME Male to PL-259 Adapter, Low Loss RF Coaxial Cable for Antenna, CB Radio, Ham Radio, Marine, Mobile, and GPS Systems is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Cables & Connectors
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Self-Host Immich on a Raspberry Pi 4 8GB: A Google Photos Replacement
- One Desk, Two Sims: Swapping a G29 Wheel and an Extreme 3D Pro Stick
- GameSir G7 SE vs DualSense: Best Controller for PC
- Claude Opus 4.8 Tops GPT-5.5: What Runs Local on a 12GB GPU
- Sound Blaster Audigy 2 ZS vs Audigy FX for Windows XP Gaming (2026)
- Qwen3.6 35B-A3B Just Cleared FoodTruck-Bench: What the MoE Sparse Path Means for 12GB Cards
- Best Controllers for Retro Gaming and Emulation in 2026
- Best Controller for Steam Deck Docked Mode in 2026
- 1080p Gaming PC Build 2026: Cost, Parts, FPS
- Best Streaming Gear for New Content Creators in 2026
- Why Stock GPU Pastes Last Longer Than Aftermarket Ones
- Local RTX 3060 rig vs Kimi K3's cheap API: the 2026 cost-per-task math
- Steam Deck OLED vs ROG Ally Z1 Extreme: 2025 Comparison
- Build a Motion-Triggered Trail Camera With the Raspberry Pi HQ Camera (2026)
- Best Budget SSD for Gaming and Boot Drives in 2026
- 2000s LAN Party Modern Setup Guide: Hardware, Cables, and Server Stack in 2026
- Rescue a Dying Vintage IDE Drive: Imaging Retro Disks with a USB-to-IDE Adapter
- The Best Retro Game Emulators for Mac in 2026
- Best Gaming Mouse Pad for FPS Esports (2026)
- Samsung 870 EVO vs Crucial BX500: Best Budget SATA SSD for a Secondary or Retro Build in 2026
- Running Llama 3.1 70B Locally: Hardware Requirements & Performance Benchmarks
- gpt-oss 20B: RTX 3060 12GB vs Ryzen 5 5600G CPU-Only (2026)
- Qwen 3.6 35B GGUF: NTP vs MTP Quantization Explained
- Open-WebUI Self-Hosted on a Ryzen 5 5600G + RTX 3060: A Private ChatGPT at Home
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090