VIVO Quad Pneumatic Monitor Mount for 4 Screens up to 32 inches (STAND-V400G)
Bottom line: The VIVO Quad Pneumatic Monitor Mount for 4 Screens up to 32 inches: Holds four 17-32 inch screens, up to 17.6 lbs each, on VESA 75x75 or 100x100; main trade-off: center brackets are fixed, so only the two outer arms articulate freely.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Holds four 17-32 inch screens, up to 17.6 lbs each, on VESA 75x75 or 100x100
- ✓ Dual pneumatic springs counterbalance monitors for one-hand repositioning
- ✓ Adjustable spring tension tunes the arms to heavy or light panels
- ✓ +90 to -90 degree tilt, 180 degree swivel, 360 degree rotation per screen
- ✓ C-clamp mounts drill-free to desks up to 3.25 inches thick
Cons
- ✗ Center brackets are fixed, so only the two outer arms articulate freely
- ✗ 32 inch screen ceiling rules out 34 inch and wider ultrawide panels
- ✗ 17.6 lb per-screen limit excludes many larger or older heavy monitors
- ✗ Four loaded arms put concentrated stress on a single clamp point
Manufacturer description
The VIVO STAND-V400G quad monitor mount turns one desk into a four-screen command center, holding 17" to 32" displays weighing up to 17.6 lbs each on VESA 75x75mm or 100x100mm patterns. Dual side pneumatic arms counterbalance your monitors so repositioning takes a light push instead of a wrench, while fixed center brackets anchor the two inner screens. You get +90 to -90 degrees of tilt, 180 degrees of swivel, and full 360-degree rotation, so you can run two landscape screens flanked by portrait displays for code, logs, or trading charts. Spring tension adjusts up for heavier panels and down…
SpecPicks Verdict
SpecPicks scored VIVO Quad Pneumatic Monitor Mount for 4 Screens up to 32 inches using a rating × review-volume × price-fit model applied to published specs and reviews across the home & kitchen category. Compare with similarly-priced alternatives in the home & kitchen category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for home & kitchen of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Fits 17" to 32" Screens: Quad monitor mount holds most computers 17" to 32" in size and up to 17.6 lbs in weight (each) with VESA 75x75mm or 100x100mm mounting holes
- Articulation and Height Adjustment: Dual side pneumatic arms and fixed center brackets offer +90° to -90° tilt, 180° swivel, and 360° rotation for comfortable viewing angles. Dual pneumatic springs allow smooth transitions by counterbalancing the monitors
- Sturdy Steel and Aluminum Support: Securely holds four monitor screens weighing up to 17.6 lbs each. Tension can be increased for heavier monitors or decreased for lighter monitors to achieve more flexibility
- Easy Setup: Step-by-step instructions and hardware are provided to make assembly and installation a smooth and painless process. Win back valuable desk space by mounting 4 individual monitors on one stand
- Drill-Free Mounting: This product secures to your surface of choice up to 3.25" thick via a heavy-duty C-clamp for a solid hold
Full Specifications
| Brand | VIVO |
|---|---|
| Color | Black |
| Weight | 400g |
| Material | Alloy Steel, Plastic |
| Unit Count | 4 Count |
| Model Number | STAND-V400G |
| Mounting Type | Tabletop Mount |
| Movement Type | Articulating |
| Mfr Part Number | STAND-V400G |
| Number of Items | 1 |
| Compatible Devices | Monitor |
| Enclosure Material | Alloy Steel, Plastic |
| Maximum Tilt Angle | 90 degrees |
| Drill-Free Mounting | This product secures to your surface of choice up to 3.25" thick via a heavy-duty C-clamp for a solid hold |
| Warranty Description | 3 Year Warranty |
| Fits 17" to 32" Screens | Quad monitor mount holds most computers 17" to 32" in size and up to 17.6 lbs in weight (each) with VESA 75x75mm or 100x100mm mounting holes |
| Maximum-Supported Screen Size | 32 inches |
| Minimum-Supported Screen Size | 17 inches |
| Full listing title | VIVO Quad Pneumatic Monitor Mount for 4 Screens up to 32 inches, Fully Adjustable, Heavy Duty Desk Stand with C-Clamp, Black, STAND-V400G |
Ready to buy?
VIVO Quad Pneumatic Monitor Mount for 4 Screens up to 32 inches, Fully Adjustable, Heavy Duty Desk Stand with C-Clamp, Black, STAND-V400G is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Home & Kitchen
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Game Controllers for PC, Retro & Handheld in 2026
- Local LLM Hardware in 2025: Picking GPUs, CPUs & RAM
- Best USB Microphone for Streaming in 2026: HyperX QuadCast 2 vs Blue Yeti
- Best Single-Board Computer Kits for Beginners (2026)
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- Ryzen 7 5800X3D vs Core i7-14700K: The DDR4 Gaming Faceoff for 2026 Builders
- RTX 3090 24GB vs RTX 4060 Ti 8GB in 2026: Used VRAM or New Efficiency?
- When Does a Homelab Become a Job?
- Qwen 3.6 vs Frontier Models on a Local Rig: The Honest Gap
- 007 First Light on Steam Deck: Performance & Best Settings
- 8BitDo Pro 2 vs GameSir G7 SE for Raspberry Pi Emulation
- Best PC Gaming Controllers in 2026: 5 Picks for Every Budget
- Best Parts for a Gaming PC That Also Runs Local LLMs in 2026
- Best Budget SSDs for Homelab and Proxmox Boot Drives in 2026
- Direct3D vs OpenGL vs Glide: The API War That Shaped PC Gaming
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget 1080p Gaming Build
- News: Mistral Enters Robotics With Robostral Navigate 8B
- Gemma 4 12B Speech-to-Text on an RTX 3060 12GB: Local Transcription tok/s
- Qwen 3.6 27B vs Sonnet 4.6: Local Agentic Benchmarks
- Best Retro Emulator Consoles 2026: AMD GPU Buying Guide
- Anthropic Tightens Claude Fable 5 Limits — Why Builders Are Eyeing Local Rigs
- Flux 3 Native-Audio Video: Can a 12GB GPU Run It?
- AI-Driven Driver Install for Win98: Vision-LLM + 3060 12GB Build (2026)
- After the Mythos Cyber-Ops Report, Why Run AI on an Air-Gapped Local Box
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090