UGREEN Bluetooth 6.0 LDAC Audio Adapter for TV Home Speakers
Bottom line: The UGREEN Bluetooth 6.0 LDAC Audio Adapter for TV Home Speakers ($25.99 on Amazon as of 2026-10-06): LDAC decoding up to 24-bit/96kHz, Sony Hi-Res Audio certified; main trade-off: receiver only, cannot transmit TV audio out to headphones.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ LDAC decoding up to 24-bit/96kHz, Sony Hi-Res Audio certified
- ✓ Bluetooth 6.0 for faster pairing and steadier audio-video sync
- ✓ AUX and RCA outputs both included for older stereo receivers
- ✓ Pairs two phones at once, no disconnect-reconnect to swap
Cons
- ✗ Receiver only, cannot transmit TV audio out to headphones
- ✗ 10 meter range limits placement to one room
- ✗ No brand-listed codec fallback details beyond LDAC
- ✗ Source device must support LDAC to get the 96kHz benefit
SpecPicks Verdict
SpecPicks scored UGREEN Bluetooth 6.0 LDAC Audio Adapter for TV Home Speakers using a rating × review-volume × price-fit model applied to published specs and reviews across the power supplies & cables category. Compare with similarly-priced alternatives in the power supplies & cables category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Add Bluetooth to Home Audio Systems: This Bluetooth receiver upgrades old stereo systems and home audio to Bluetooth wireless through AUX or RCA connections. Just plug and play—pair your device and enjoy music instantly. The compact design minimizes clutter in your home audio setup. (Receiver only; Not support transmitter function.)
- Latest Bluetooth 6.0 Technology: The latest Bluetooth 6.0 technology enables this Bluetooth receiver for TV to deliver faster pairing and more stable signal transmission. Improved audio-video synchronization helps reduce dropouts and interruptions, providing a smoother wireless listening experience.
- LDAC Audio Decoding for Detailed Sound: UGREEN Bluetooth 6.0 receiver supports LDAC audio decoding with up to 24-bit/96kHz high-resolution audio, preserving more audio detail and minimizing distortion for a more authentic listening experience. Sony Hi-Res Audio certified, the Bluetooth adapter delivers refined and immersive sound even over wireless.
- Dual Pairing for Effortless Sharing: The Bluetooth adapter supports simultaneous connection with two Bluetooth devices, allowing easy music sharing without repeated disconnecting and reconnecting. With a wireless range of up to 10 meters, the Bluetooth receiver minimizes latency and signal interruptions as you move around your living room or bedroom, enjoy reliable performance without audio dropouts.
- Flame-Retardant Casing for Safety: The Bluetooth adapter‘s case is made of flame-retardant PC material, offering excellent heat resistance and fire safety. UGREEN Bluetooth receiver is sturdy and durable, ensuring long-lasting use without easily getting damaged, making it ideal for home audio environments.
Full Specifications
| Brand | UGREEN |
|---|---|
| Material | Plastic |
| Unit Count | 1.0 Count |
| Audio Input | 3.5mm AUX, RCA |
| Connectivity | Bluetooth |
| Power Source | Corded Electric |
| Compatibility | PC |
| Control Method | Touch |
| Connection Type | Wireless |
| Includes Remote | No |
| Special Feature | Low Latency |
| Audio Output Mode | Stereo |
| Audio Output Type | Headphone, Speaker |
| Installation Type | wired |
| Bluetooth support? | Yes |
| Compatible Devices | Car Stereo System, Headphone, Home Stereo System, Speaker |
| Enclosure Material | Plastic |
| Hardware Interface | 3.5mm Audio |
| Additional Features | Low Latency |
| Supported Standards | Bluetooth 6.0, LDAC |
| Full listing title | UGREEN Bluetooth 6.0 LDAC Audio Adapter for TV Home Speakers, High-Resolution Wireless Audio Bluetooth Receiver, Add Bluetooth Wireless to AUX/RCA Stereo Systems, Plug & Play and Dual Device Pairing |
Ready to buy?
UGREEN Bluetooth 6.0 LDAC Audio Adapter for TV Home Speakers, High-Resolution Wireless Audio Bluetooth Receiver, Add Bluetooth Wireless to AUX/RCA Stereo Systems, Plug & Play and Dual Device Pairing is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Forza Horizon 6 Runs Smooth on Steam Deck — the Dock-and-Settings Combo
- 10 Raspberry Pi Projects Worth Building in 2025
- Pi Pico Puts Bluetooth Keyboards on the I2C Bus
- Build a Wireless Fingerprint Door Lock on a Raspberry Pi Zero W
- ComfyUI on an RTX 3060 12GB: Local Stable Diffusion Setup and Real Throughput
- Period-Correct 2002 LAN Party Build Around an Athlon XP and GeForce 4 Ti
- Best Wired Gear for Tournament-Legal LAN Play in 2026
- 1440p High-Refresh vs 4K for Gaming in 2026: ASUS TUF 27" QHD vs SANSUI/KOORUI 4K
- Raspberry Pi AI HAT+ 26 TOPS: Specs, Setup, and Verdict
- Best Streaming Microphones for Content Creators in 2026
- AMD Ryzen 9 9950X3D2 on Linux vs Windows 11: Why the Penguin Wins
- Sound Blaster Audigy FX vs SoundBlasterX G6: Picking a Card for a 2002-2008 Era Build
- Ryzen 7 5800X vs Ryzen 7 5700X for 2026 Budget Gaming Builds
- Best GPU for Gaming in 2026: Our Top 5 Picks Tested
- Building a Period-Correct 2003 LAN Party Rig with Athlon XP and Audigy 2 ZS
- Tesla Caps AI Spend at $200/Week — The Local RTX 3060 Rig Case
- DeepSeek on the US Entity List: Running V4 Locally in 2026
- Best Plug-and-Play Retro & Budget Consoles in 2026: 5 Picks Ranked
- Gemma 3 12B vs Qwen2.5 14B on a 12 GB RTX 3060: Which Fits, Which Is Faster
- Ollama vs vLLM for Single-User Local Chat on an RTX 3060 12GB (2026)
- Build a Pocket RetroPie Handheld on a Raspberry Pi Zero W (2026 BOM)
- Building a Silent Pentium III Windows 98 Gaming Rig in 2026
- Local AI News You Missed in April 2026
- ComfyUI on an RTX 3060 12GB: What Image Models Actually Run Well
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090