Ediloca
Ediloca EN605 128GB M.2 SSD
Bottom line: The Ediloca EN605 128GB M.2 SSD ($36.99 on Amazon as of 2026-10-30 22:12 UTC): Rated up to 1130 MB/s sequential reads over PCIe Gen3 x4; main trade-off: rated 400 MB/s writes slow down large file copies.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-30. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Rated up to 1130 MB/s sequential reads over PCIe Gen3 x4
- ✓ Standard M.2 2280 size fits most NVMe laptop and desktop slots
- ✓ NVMe 1.3 protocol with low-latency, low-power operation
- ✓ Built-in LDPC error correction for data integrity
- ✓ Backed by a 3-year limited service term from Ediloca
Cons
- ✗ Rated 400 MB/s writes slow down large file copies
- ✗ 128GB fills quickly once an OS and a few games are installed
- ✗ Needs a PCIe NVMe M.2 slot; SATA-only M.2 slots will not work
- ✗ No endurance (TBW) rating given in the product specs
Manufacturer description
The Ediloca EN605 128GB M.2 SSD is a simple NVMe upgrade for an older laptop or desktop. It uses a PCIe Gen3 x4 interface and the NVMe 1.3 protocol. It is rated for sequential speeds of up to 1130 MB/s read and 400 MB/s write. The read speed means faster boot and app-load times than a mechanical hard drive. The write speed is modest, so the drive works best as a boot drive or in a light-duty system, not as a scratch disk for large file copies. The drive uses the standard M.2 2280 form factor. It fits any desktop or notebook with an M.2 slot that supports PCIe NVMe. Ediloca lists it as…
SpecPicks Verdict
SpecPicks scored Ediloca EN605 128GB M.2 SSD using a rating × review-volume × price-fit model applied to published specs and reviews across the memory & ram category. Ediloca's memory & ram lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for memory & ram of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will the Ediloca EN605 fit in my laptop or desktop?
It uses the M.2 2280 form factor (22 mm wide, 80 mm long). It works in any desktop or notebook with an M.2 slot that supports PCIe NVMe. Check your system manual to confirm the slot supports NVMe and not just SATA.
How fast is the Ediloca EN605 128GB SSD?
Ediloca rates it for sequential reads up to 1130 MB/s and sequential writes up to 400 MB/s over a PCIe Gen3 x4 interface using the NVMe 1.3 protocol.
Is 128GB enough for gaming?
128GB is enough for an operating system and a few applications. For a game library, plan to add a second, larger drive and use the EN605 as your boot drive.
Which operating systems does the EN605 support?
Ediloca lists compatibility with Windows 10, 8, 7 and later. On older systems, confirm that your motherboard BIOS can boot from an NVMe drive before installing your OS on it.
What warranty does the Ediloca EN605 come with?
Ediloca provides a 3-year limited service term and offers technical support. Check the product listing for the full coverage terms.
Key Features
- 【Top Performance】With the accelerated performance through NVMe technology, EDILOCA EN605 M.2 SSD can provide you with shorter loading time and faster data transfer. EN605 NVMe SSD can reduce OS and game/software latency, you can get stable and smooth gaming / office experience.
- 【High-Speed Transfer】PCIe Gen3 x4 high-speed interface, sequential read or write speed up to 1130/400 MB/s. Compliant with NVMe 1.3 protocol standard, it has high performance, low latency and low power consumption features.
- 【Stable & Reliable】Built-in LDPC error correction decoding effectively ensures the correctness and reliability of data transmission and access.
- 【Widely Compatible】Lightweight design with M.2 2280 interface specification, it can be used by desktop or notebook computers that support M.2 PCIe interface. Perfectly compatible with Windows 10/8/7 and later.
- 【3-Year Service】EDILOCA has 3 years limited service. We have strict control standards for our products, each hard drive has been tested countless times to ensure that there is no quality problem before sending it to you. If you have any questions about the product, We will provide you with technical support services.
Full Specifications
| Brand | Ediloca |
|---|---|
| Model Name | EN605_128 |
| Read Speed | 1130 megabytes_per_second |
| Unit Count | 1 Count |
| Form Factor | M.2 2280 |
| Media Speed | 600 MB/s |
| Model Number | EN605_128 |
| Compatibility | PC |
| Hard Disk Size | 128 GB |
| Hard-Drive Size | 128 GB |
| Mfr Part Number | EN605_128 |
| Number of Items | 1 |
| Special Feature | Dust Resistant |
| Installation Type | Internal Hard Drive |
| Compatible Devices | Desktop |
| Data Transfer Rate | 1130 megabytes_per_second |
| Additional Features | Dust Resistant |
| Hard Disk Interface | PCIE x 4 |
| Hard Disk Description | Solid State Drive |
| Hard Disk Form Factor | 12 inches |
| Full listing title | Ediloca EN605 128GB M.2 SSD, NVMe1.3 PCIe Gen3 x4 SSD Internal Hard Drive, M.2 2280 - Read/Write Speed up to 1130/400 MB/s - Internal SSD Compatible with Laptop & PC Desktop |
Hardware benchmark data
Ready to buy?
Ediloca EN605 128GB M.2 SSD, NVMe1.3 PCIe Gen3 x4 SSD Internal Hard Drive, M.2 2280 - Read/Write Speed up to 1130/400 MB/s - Internal SSD Compatible with Laptop & PC Desktop is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-30. Price and availability subject to change.
Related Memory & RAM
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Best Local LLM Parts to Buy Before the 2026 Memory Spike
- Minecraft on Raspberry Pi via Vulkan: 2026 Setup Guide
- Building a Voodoo 2 SLI Windows 98 Gaming Rig in 2026: Period-Correct Parts That Are Still Findable
- Ryzen 7 5800X vs Ryzen 9 3900X: Mistral Small 24B Offload (2026)
- How Creative Killed Aureal: The 1999 Patent War, Audigy's Lineage, and Why Consumer PC Audio Stagnated for…
- LLM-Driven Driver Install on Windows 98, 2000, and XP: Vision-LLM Walkthroughs from a 4-PC Retro Fleet
- Qwen3.6-35B-A3B vs Gemma 4 26B-A4B: MoE Showdown on Consumer GPUs
- Asus RTX 5060 Near-MSRP Deal Has Expired
- Build a RetroPie Arcade on a Raspberry Pi 4 8GB in 2026
- Raspberry Pi 5 IOMMU Support Is Landing in the Mainline Linux Kernel
- RTX 5090 vs RTX 6000: Specs, Gaming, AI Compared
- Best CPU for Streaming and Gaming Under $300: Ryzen 7 5800X vs 5700X vs 5600G
- Handheld Gaming PC Comparison: 2024's Top Picks
- OpenAI and Broadcom Unveil 'Jalapeño' Inference Chip
- Ryzen 5 5600G vs Core i7-9700K for 1080p Gaming
- Best 4K Monitor Under $400 for Console & PC Gaming 2026: SANSUI vs KOORUI vs ASUS TUF
- Debugging Vintage Windows with Claude: SYSFIX Patterns for Win98 vcache, MSNP32, and Glide Hangs
- Stable Diffusion vs Flux — which open image model wins in 2026?
- Best Steam Deck Dock for 4K Desktop Gaming in 2026: JSAUX Docking Station Tested Against the Use Case
- Ryzen AI Halo vs a DIY RTX 3060 Box for Local LLMs in 2026
- Noctua NH-U12S vs DeepCool AK620 for the Ryzen 7 5800X
- Is the RTX 3060 12GB Still the Best Budget GPU for 1080p Esports in 2026?
- Transcend CF133 CompactFlash as a Win98 Boot Drive: Speed Tests, Compatibility, and the Adapter That…
- Rescue a Dying Vintage IDE Drive by Cloning It to CompactFlash
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090