LAFVIN POE HAT for Raspberry Pi 5/4B/3B+
Bottom line: The LAFVIN POE HAT for Raspberry Pi 5/4B/3B+ is a specs-and-price decision rather than a crowd-consensus one in the emulation hardware category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Before you buy
- Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
LAFVIN POE HAT is an Ethernet power-supply expansion board fully compatible with Raspberry Pi 3B+/4B/5.Compliant with IEEE 802.3af/at standards, it draws power directly from a PoE switch through a single network cable; on-board 12 V/2 A and 5 V/4.5 A independent DC outputs deliver ample power to the Raspberry Pi and peripherals. Application Scenarios:Pair with any IEEE 802.3af/at PoE router or switch to supply both data and power through one cable, simplifying cable management.Specifications:PoE power input: 37 V ~ 57 V DC inputPower output: GPIO header: 5 V 4.5 A (MAX); 2P header: 12 V 2 A…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for LAFVIN POE HAT for Raspberry Pi 5/4B/3B+, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the emulation hardware category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【Wide Compatibility】 Perfectly compatible with Raspberry Pi 3B+/4B/5, enabling quick switching between different models via a 2.54mm 2×P connector socket, meeting the needs of different users.
- 【IEEE 802.3af/at Standard】Complies with IEEE 802.3af/at network standards, allowing power to be taken directly from a PoE switch with just one network cable, simplifying wiring and reducing clutter.
- 【Rich Interfaces & Sufficient Power】Retains standard 40PIN GPIO header for stacking other Raspberry Pi expansion boards; equipped with two independent DC output interfaces (12V/2A and 5V/4.5A) to provide sufficient power for Raspberry Pi and peripherals.
- 【Easy to Use & Mechanical Friendly】Simply snap on the POE HAT and plug in the 2×2P connector to work immediately without additional settings; reserved space for active heatsink and wire outlet openings on each terminal for easy wiring.
- 【Free tutorial】Online documentation and video tutorials guide you through assembly and configuration.
Full Specifications
| Brand | LAFVIN |
|---|---|
| Model Name | POE HAT |
| Compatibility | Switch |
| Built-In Media | Cross-head screwdriver, POE HAT, Pi5 heatsink kit, PoE adapter header |
| Processor Count | 1 |
| Compatible Devices | Raspberry Pi 3B+, Raspberry Pi 4B, Raspberry Pi 5 |
| Included Components | Cross-head screwdriver, POE HAT, Pi5 heatsink kit, PoE adapter header |
| Warranty Description | 1 |
| RAM Memory Technology | DDR4 |
| Connectivity Technology | Power over Ethernet (PoE) |
| Item Dimensions L x W x H | 5.9"L x 3.9"W x 1"H |
| Full listing title | LAFVIN POE HAT for Raspberry Pi 5/4B/3B+, IEEE 802.3af/at Compliant, 5V 4.5A & 12V 2A Dual Output, PoE Ethernet Power Supply Expansion Board with GPIO Header & Installation Kit |
Ready to buy?
LAFVIN POE HAT for Raspberry Pi 5/4B/3B+, IEEE 802.3af/at Compliant, 5V 4.5A & 12V 2A Dual Output, PoE Ethernet Power Supply Expansion Board with GPIO Header & Installation Kit is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Emulation Hardware
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- Best Gaming SSD for PC Builds in 2026: 5 Picks Tested
- How to run Llama 3.1 8B on Apple M4 Pro (2026)
- ASUS TUF VG27AQ vs Dell G3223Q: 1440p HDR or 4K 32-Inch in 2026
- Inkling 975B Open Weights: What a Frontier Speech Model Means for Local Rigs
- Best Raspberry Pi 4 8GB Retro Emulation Setup in 2026
- Best Plug-and-Play Retro Console to Buy in 2026
- Why Retro Cables Are Melting Into Their Cases in Storage
- Ryzen 5600G vs 5700X vs 5800X: Best CPU for a 1080p Gaming Build (2026)
- RTX 3060 12GB vs RX 6700 XT 12GB for Phi-4 14B (2026)
- Period-Correct LAN Party Build: 2002 Pentium 4 + GeForce 4 Ti + Sound Blaster Live
- Best Budget SSD for a Gaming PC in 2026: SATA vs NVMe
- NVIDIA Cosmos 3 vs Ideogram 4.0: Which Open Image Model to Run on 12GB
- Best Budget Gaming CPU in 2026: 5 AM4 and Entry Picks Ranked
- AMD Radeon RX 9070 GRE Review: Thoroughly Midrange
- Jellyfin on Raspberry Pi 4 8GB with an SSD (2026 Guide)
- Qwen 27B Context Collapse: Why MTP Drops 137K to 14K on 12GB GPUs
- Raspberry Pi 500 Plus: The Real Lineup vs. the Rumors
- Best Streaming and Podcasting Gear for 2026: 5 Picks for Mic, Light, and Monitoring
- ComfyUI on an RTX 3060 12GB: What Image Models Actually Run Well
- Add NVMe Boot and Active Cooling to a Raspberry Pi 5 in 2026
- LattePanda Sigma vs Raspberry Pi 4 8GB: x86 Windows SBC vs ARM Linux for Edge AI Workloads in 2026
- Best CompactFlash and IDE-to-USB Adapters for Retro PC Builds (2026)
- Raspberry Pi 5 + Hailo-8L vs Coral Dual Edge TPU: Which AI Accelerator HAT Wins in 2026?
- Samsung's 360Hz 4K QD-OLED vs Budget 4K Gaming Monitors: Is the Premium Worth It?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090