16-Port Gigabit Industrial Ethernet Switch | 10/100/1000Mbps Redundant 12-48V DC Power DIN-Rail Mount
Bottom line: Per its Amazon listing, the Yjntoximc 16-Port Gigabit Industrial Ethernet Switch: reliable performance from -40°C to +80°C; delivers 40Gbps switching capacity.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Reliable performance from -40°C to +80°C
- ✓ Delivers 40Gbps switching capacity
- ✓ Backed by Yjntoximc's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Yjntoximc 16-Port Gigabit Industrial Ethernet Switch, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the networking category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, load rating and mounting or device compatibility in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【16-port Gigabit RJ45】16 auto-sensing 10/100/1000Mbps ports with Auto-MDI/MDIX and auto-negotiation, perfectly suited for industrial automation, surveillance, and control networks.
- 【Redundant 12–48V DC Power Input】Dual wide-range DC inputs with built-in overload recovery and reverse polarity protection ensure uninterrupted operation in demanding field conditions.
- 【Industrial-Grade Enclosure】IP40-rated aluminum metal housing with 6KV surge protection; pre-installed DIN-Rail mounting for easy and flexible installation.
- 【Wide Operating Temperature Range】Reliable performance from -40°C to +80°C, with an MTBF exceeding 200,000 hours, designed for stability in extreme industrial environments.
- 【High-Efficiency Switching Performance】Delivers 40Gbps switching capacity, 1M-bit packet buffer, 16K MAC address table, and supports IEEE 802.3x flow control and 802.3az energy-efficient Ethernet.
Full Specifications
| Brand | Yjntoximc |
|---|---|
| Color | Black |
| Voltage | 48 volts_of_direct_current |
| Interface | RJ45 |
| Unit Count | 1 Count |
| Switch Type | unmanaged |
| Model Number | Non-PoE |
| Compatibility | Switch, Mac |
| Built-In Media | 16-Port Industrial Ethernet Switch, 6-pin Terminal Block, User Manual |
| Mfr Part Number | YJ-IMC016G |
| Number of Ports | 16 |
| Case Material Type | Aluminum |
| Data Transfer Rate | 1 gigabits_per_second |
| Included Components | 16-Port Industrial Ethernet Switch, 6-pin Terminal Block, User Manual |
| Warranty Description | 2 years |
| Item Dimensions L x W x H | 3.74"L x 2.76"W x 1.42"H |
Ready to buy?
16-Port Gigabit Industrial Ethernet Switch | 10/100/1000Mbps Redundant 12-48V DC Power DIN-Rail Mount is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Networking
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Mistral Medium 3.5 Hardware Requirements: 128B Dense, 78 GB at Q4
- Glide vs OpenGL vs Direct3D: The PC Gaming API War 1996-2003, Benchmarked
- On-Device AI Keyboards: Can an RTX 3060 12GB Train the Model?
- Intel Axes BigDL: Local-LLM Picks for Consumer GPUs in 2026
- CompactFlash as a Win98 Boot Drive: The 2026 Setup Guide
- Build a Raspberry Pi 4 Pi-hole + Unbound Ad-Blocker in 2026
- Best CPU for Gaming in 2026: Intel vs AMD Showdown
- Genesis Mini vs SNES Classic vs a Pi RetroPie in 2026
- Build a Home NAS on a Raspberry Pi 4 8GB in 2026
- Best Wireless Controller for PC LAN Parties & Couch Co-Op in 2026
- xAI Open-Sources Grok-Build: Can You Run It Locally?
- Is the RTX 3060 12GB Still Worth It for 1080p Gaming in 2026?
- Silicon Motion PCIe 6.0: Nvidia AI Drives Consumer Storage
- ComfyUI Ideogram 4: Setup, GPU Needs & Hardware Guide
- Microsoft + NVIDIA's 'Agent PC': What Local Hardware Does an On-Device AI Agent Actually Need in 2026?
- Rescue a Dying Vintage IDE Drive by Cloning It to CompactFlash
- Bilingual Voice Agents: Frontier ASR on Code-Switched Speech
- Best 1440p Gaming Monitor in 2026: 5 Picks for Esports, RPGs, and PS5
- Watching a Z80 Live From a Raspberry Pi RP2350
- RTX 3060 12GB vs RTX 4070 12GB for Qwen2.5 14B (2026)
- Audio DSP Firmware for the Raspberry Pi Pico: A 2026 Guide
- Voodoo3 3000 PCI vs AGP — Driver Install Troubleshooting in 2026
- Period-Correct 2002 LAN Party Build Around an Athlon XP and GeForce 4 Ti
- How to run Qwen 3 14B on Apple M3 Ultra
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090