GIM Magnetic RGB Light Strip for PC Case
Bottom line: Per its Amazon listing, the GIM Magnetic RGB Light Strip for PC Case ($15.99 on Amazon as of 2026-11-20 13:45 UTC): connect 3pin to Motherboard which has 5V ARGB 3pin header; : 1.1ft * 0.06ft * 0.06ft (13.7inch * 0.7inch * 0.7inch) (35cm * 1.8cm * 1.8cm).
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ Connect 3pin to Motherboard which has 5V ARGB 3pin header
- ✓ : 1.1ft * 0.06ft * 0.06ft (13.7inch * 0.7inch * 0.7inch) (35cm * 1.8cm * 1.8cm)
- ✓ Backed by GIM's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for GIM Magnetic RGB Light Strip for PC Case, so this read rests on the manufacturer's listed specs and the current price in the rgb & lighting category (how we evaluate). Compare with similarly-priced alternatives in the rgb & lighting category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【3-Way To Connect】: 1. Connect 3 Pin to Lighting Controller, Lighting Controller to SATA header of your Power Supply. 2. Connect the 4 pin to 6 pin fan port of GIM Hub. 3. Connect 3pin to Motherboard which has 5V ARGB 3pin header
- 【3-Way to Adjust Color&Speed】: 1. When connect to Lighting Controller, click "M",come to next mode; click "S",adjust light speed; click"C",adjust colors. 2.When Connect to GIM Hub,use Fan Controller to adjust light strip's speed & color.3.Connect with 5V ARGB 3Pin header Motherboard directly,adjust color & Speed through Computer
- 【Addressable RGB SYNC】-RGB sync effects provide an unlimited color combination and charming light effect. Compatible with Asus Aura, Asrock RGB Led, Gigabyte RGB Fusion, MSI Mystic Light, etc
- 【Easy-Install】:Rectangular light bar with magnets on both sides can be easily attached to your gaming case.Ideal rgb led strip lights for pc
- 【Special Design Size】: 1.1ft * 0.06ft * 0.06ft (13.7inch * 0.7inch * 0.7inch)(35cm * 1.8cm * 1.8cm), please make sure your case has enough space before buying
Full Specifications
| Full listing title | GIM Magnetic RGB Light Strip for PC Case, 1.1ft ARGB LED Strip Lights with 5V 3-pin, 4-pin Header & Mini Controller with SATA Header, Sync Color Changing & Light Speed Led Strip |
|---|
Ready to buy?
GIM Magnetic RGB Light Strip for PC Case, 1.1ft ARGB LED Strip Lights with 5V 3-pin, 4-pin Header & Mini Controller with SATA Header, Sync Color Changing & Light Speed Led Strip is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related RGB & Lighting
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Qwen3.6-27B on Dual RTX 3060 12GB: The $400 30-50 tok/s Local LLM Build
- Best Gaming Mice for Competitive FPS in 2026
- After the Claude Code Malware Scare: Build an Isolated Local Agent Rig
- Ryzen 7 5700X + RTX 3060 12GB: A Balanced 1440p Build in 2026
- Raspberry Pi OS Moves to Linux 6.18 LTS: What the Kernel Jump Means for Pi 4 Owners
- RX 9060 XT 16GB vs RTX 3060 12GB for Local LLMs: 4GB More VRAM, Which Wins?
- Intel Arc for Stable Diffusion: ComfyUI + A1111 setup (2026)
- Amstrad CPC Emulator Now Runs on the Raspberry Pi Pico 2
- Building a 2001 Pentium III + GeForce 3 Win98SE Gaming Rig: A 2026 Build Log
- Raspberry Pi 4 8GB as a 2026 Home Server: What Actually Runs Well
- What Happened to the LLM Training Data Shortage?
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- Playnix RX 9060 XT 16GB: A Steam Machine Rival at €1,140
- Intel Arc B580 for LLM Inference: What It Can Actually Do
- How to Filter Steam Deck's 20K+ Games by FPS, Price, HLTB
- Best Budget SSDs for Retro and Homelab Builds in 2026
- Secluso: Private DIY Home Security on a Raspberry Pi 4
- Running a Local LLM on the Ryzen 7 5800X + RTX 3060 12GB: Ollama Throughput Per Watt
- AMD EXPO Ultra-Low Latency BIOS Updates: 600-Series Guide
- Raspberry Pi 4/5 Wall Mount Case: 3D Printing Guide
- Gemma 4 31B Heretic Finetune: Can It Run on a 12GB RTX 3060?
- Ideogram 4.0 Open Weights: Running Text-to-Image on a 12GB GPU
- CompactFlash as a Retro PC Boot Drive: The 2026 CF-to-IDE Build Guide
- GPT-5.6 Sol vs Local Open-Weights: Why a 12GB Rig Still Earns Its Keep
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090