uxcell 300W 50 Ohm 5% Fixed Type Ceramic Tubular Wire Wound Resistor
Bottom line: The uxcell 300W 50 Ohm 5% Fixed Type Ceramic Tubular Wire Wound Resistor is a specs-and-price decision rather than a crowd-consensus one in the power supplies & cables category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Product Name : Wire Wound Resistor;Type : Fixed;Rated Power : 300W
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Used and vintage listings vary by seller and condition — check the listing photos, description and return terms before buying
Manufacturer description
Metal wire is wound on the ceramic tube coated with non-flammable material, good dissipation, high stability and long life. This fixed wire wound resistor is widely used in power supply, transducer, elevator, arena and high requirement equipment industry.
SpecPicks Verdict
SpecPicks scored uxcell 300W 50 Ohm 5% Fixed Type Ceramic Tubular Wire Wound Resistor using a rating × review-volume × price-fit model applied to published specs and reviews across the power supplies & cables category. uxcell's power supplies & cables lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Product Name : Wire Wound Resistor;Type : Fixed;Rated Power : 300W
- Resistance : 50 Ω;Resistance Tolerance : ±5% (J);Material : Metal, Ceramic
- Tube Size : 27 x 4.3cm/ 10.6" x 1.6" (L*D);Hole Diameter : 6mm/ 0.24"
- Overall Size : 34 x 4 x 6cm/ 13.4" x 1.6" x 2.4" (L*W*H);Color : As Picture Shown
- Net Weight : 557g;Package Content : 1 x Wire Wound Resistor
Full Specifications
| Brand | uxcell |
|---|---|
| Weight | 557g |
| Tube Size | 27 x 4.3cm/ 10.6" x 1.6" (L*D);Hole Diameter : 6mm/ 0.24" |
| Dimensions | 34 x 4 x 6cm |
| Net Weight | 557g;Package Content : 1 x Wire Wound Resistor |
| Resistance | 50 Ω;Resistance Tolerance : ±5% (J);Material : Metal, Ceramic |
| Overall Size | 34 x 4 x 6cm/ 13.4" x 1.6" x 2.4" (L*W*H);Color : As Picture Shown |
| Product Name | Wire Wound Resistor;Type : Fixed;Rated Power : 300W |
| Package Dimensions | 13.3 x 2.6 x 2.3 inches |
Ready to buy?
uxcell 300W 50 Ohm 5% Fixed Type Ceramic Tubular Wire Wound Resistor is vintage hardware; the used and vintage market on eBay carries most of the live inventory. Prices and condition vary by seller and move in real time, so we link the live listing rather than quote a cached price. It also has an Amazon listing — check it for current price and availability. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best CRT Monitor for Retro Gaming: 2026 Buying Guide
- CompactFlash as a Win98 Boot Drive: The 2026 Setup Guide
- LM Studio on an RTX 3060 12GB: A Zero-Terminal Local LLM Setup
- Can an RTX 3060 12GB Still Run 2026's Local LLMs?
- Troubleshooting Local LLM Inference on Raspberry Pi 4 8GB and Pi 5: OOM, Swap, Quantization Crashes, and…
- Qwen3.6 35B on a Single RTX 3060 12GB: What Actually Fits
- SATA vs NVMe for a Ryzen 5800X Gaming Build: Does It Matter?
- Best Budget AM4 Build for Local LLM Inference in 2026
- Qwen-Audio-3.0-TTS-Plus Tops the Speech Arena: Run It Locally on an RTX 3060?
- Build a Silent Win98 Retro PC with CompactFlash Storage (2026)
- Best 1440p Monitor for the RTX 3060 in 2026: Picks That Actually Match
- Can a Raspberry Pi 4 8GB Run Local LLMs in 2026?
- 3dfx Voodoo2 SLI in 2026: Build Guide, Glide Setup, CF Storage
- Dual RTX 3090 Setup Guide 2026: PSU, NVLink, Cooling
- Open-Source NVIDIA NVK Vulkan Driver Now Supports DLSS
- Intel Arc B390 Handhelds vs Steam Deck: The Predator Atlas 8
- Playnix RX 9060 XT 16GB: A Steam Machine Rival at €1,140
- Best CPU Cooler for AM5 and LGA1700 Overclocking (2026)
- Best Raspberry Pi Starter Kits for Beginners (2026)
- Blue Yeti vs HyperX QuadCast 2 S: Best USB Mic for Streaming
- CompactFlash Boot Drive for Windows 98 Retro PC: The 2026 Transcend CF133 Recipe
- Best PlayStation Controller for PC Gaming in 2026
- Moonshot Pauses Kimi K3 Signups After GPU Demand Maxes Out
- Viral: Hobbyists Are Tracking Every Plane With a $50 Raspberry Pi - Here Is What You Need
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090