TekPower TP30SWV 30 Amp DC 13.8V Digital Switching Power Supply with Noise Offset
Bottom line: The TekPower TP30SWV 30 Amp DC 13.8V Digital Switching Power Supply ($139.99 on Amazon as of 2026-10-06): 30A max output powers most Ham/CB radios and amplifiers; main trade-off: switching topology can inject more RF hash than a linear supply.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ 30A max output powers most Ham/CB radios and amplifiers
- ✓ Fixed 13.8V with adjustable 9-15V DC range for varied gear
- ✓ Noise-offset circuit tuned to cut switching hash on radio bands
- ✓ Fused design with rear DC terminals, front snap output, and cigar socket
Cons
- ✗ Switching topology can inject more RF hash than a linear supply
- ✗ 30A ceiling limits use with 100W-plus HF amplifiers
- ✗ Front snap terminals and cigar socket only, no Anderson Powerpole
- ✗ 13.8V nominal caps the rail for gear needing higher voltage
Manufacturer description
TekPower TP30SWV 30 Amp DC 13.8V Switching Power Supply with Noise Offset The TekPower TP30SWV is a professional Digital DC power supply for powering many devices such as Ham/CB radio and amplifiers. It is a highly stable, fused, high quality switching power supply with 13.8V fixed, 9-15V adjustable DC power output, and 30A max current. It has a main DC output on the back of the unit, a cigar socket, and a snap in output on the front. It has excellent line and load regulation, low ripple and noise. It is designed to minimize switching noise specifically for communication uses. When there is…
SpecPicks Verdict
SpecPicks scored TekPower TP30SWV 30 Amp DC 13.8V Digital Switching Power Supply using a rating × review-volume × price-fit model applied to published specs and reviews across the power supplies category. Tekpower's power supplies lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power supplies of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- 13.8V DC Power Supply for Ham/CB Radio
- 30A MaxCurrent Output
- DC 9-15V adjustable
- Cigarette Plug + Noise offset
- 1 Year USA warranty
Full Specifications
| Brand | Tekpower |
|---|---|
| Color | Black |
| Amperage | 30 Amps |
| Material | Metal |
| Unit Count | 1.0 Count |
| Form Factor | Box-like with various output ports |
| Model Number | TP30SWV |
| Input Voltage | 110 Volts |
| Maximum Power | 414 Watts |
| Connector Type | Barrel Connector, 3 Pin XLR |
| Output Current | 30 Amps |
| Output Voltage | 13.8 Volts (DC) |
| Output Wattage | 414 Watts |
| Item Dimensions | 10.5 x 10.3 x 5.7 inches |
| Mfr Part Number | FBA_TP30SWV |
| Specification Met | High Quality Switching Power Supply |
| Enclosure Material | Metal |
| Connector Type Used on Cable | Barrel Connector, 3 Pin XLR |
Ready to buy?
TekPower TP30SWV 30 Amp DC 13.8V Digital Switching Power Supply with Noise Offset is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Power Supplies
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Raspberry Pi 500 Plus: The Real Lineup vs. the Rumors
- Why a Red Hat Engineer Ditched ARM64 for AMD Ryzen (Linux AI Builds)
- Best Gaming Gifts Under $60 in 2026
- AMD Ryzen AI Halo ($4K) vs a $900 RTX 3060 12GB Local-LLM Build: Buy or Build?
- CompactFlash vs SATA SSD vs IDE-to-USB: Best Storage for a Retro PC
- Best Budget AM4 Gaming PC Parts in 2026
- MSI RTX 3060 Ventus vs ZOTAC RTX 3060 Twin Edge: Which 12GB Card to Buy
- Best Gaming CPU Coolers Under $100 in 2026
- Gemini-SQL2 Tops Text-to-SQL — Can a 12GB RTX 3060 Run Local SQL Models Instead?
- Console to Gaming PC: What Changes in 2025
- Dump and Archive Your Retro PC's IDE Drives in 2026: A USB Adapter Workflow
- Jetson Orin Nano Super vs Raspberry Pi 5: Real Edge-AI Benchmarks (2026)
- Best GPU for Llama 3.1 70B (2026)
- Active Quake 3 and OpenArena Servers in 2026: How to Find, Join, and Host
- RTX 5080 vs RX 9070 XT
- Best SATA SSD to Upgrade Your PS4 Pro Storage in 2026
- Simba 3.2 Tops the TTS Leaderboard: Run Local Text-to-Speech on an RTX 3060 12GB
- Best SSDs and Cloning Tools to Upgrade an Aging Gaming PC or Console in 2026
- Use a Raspberry Pi 4 as a Second Monitor or KVM in 2026
- Ollama vs vLLM vs llama.cpp on a 12GB GPU: Which Wins for One User?
- PiKVM Hardware Requirements: The Real 2026 Guide
- GPT-5.6 Deleted a User's Files: Why Local, Sandboxed Agents Matter
- Best Budget GPU for Local LLMs in 2026: The 12GB RTX 3060 Case
- Best CPU Coolers for High-TDP Gaming Builds in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090