WANPTEK POWER DC Power Supply Variable 0-30V 0-10A
Bottom line: The WANPTEK POWER DC Power Supply Variable 0-30V 0-10A: Coarse and fine encoder knobs split whole and decimal values for fast, precise setting; main trade-off: switching design usually has more output ripple than a linear bench supply.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Coarse and fine encoder knobs split whole and decimal values for fast, precise setting
- ✓ Wide 0-30V, 0-10A adjustable range covers most hobby and repair loads
- ✓ Type-C port supplies 5V/3.6A to charge a phone or device under repair
- ✓ Short-circuit protection cuts output and sounds a buzzer alarm
- ✓ Auto-detects 110V/220V AC input, so there is no selector switch to set wrong
Cons
- ✗ Switching design usually has more output ripple than a linear bench supply
- ✗ Package lists an output power cord but no alligator clips or probe leads
- ✗ Key beep is on by default; turning it off takes a press-and-hold on the knob
- ✗ No PC interface, remote control or programmable presets are listed
Manufacturer description
The WANPTEK POWER DC bench power supply gives you an adjustable output of 0-30V and 0-10A from a switching regulated design, sized for electronics repair, DIY builds, lab benches and teaching labs. Setting a value is quick because the supply has two encoder knobs. The coarse knob sets the digits before the decimal point and the fine knob sets the digits after it, so you can go from 5V to 12.35V without turning one dial through its whole range. A high-definition four-digit display shows voltage and current as you adjust them. The front panel also has USB and Type-C ports. The Type-C port…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for WANPTEK POWER DC Power Supply Variable 0-30V 0-10A, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the power supplies category before committing. On the listing's own facts, the case for it is "Coarse and fine encoder knobs split whole and decimal values for fast, precise setting"; the main trade-off is "Switching design usually has more output ripple than a linear bench supply". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for power supplies of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
What voltage and current range does this WANPTEK bench power supply cover?
You can adjust the output from 0 to 30V and from 0 to 10A. A coarse knob sets the digits before the decimal point, and a fine knob sets the digits after it.
Can I use it on 220V power, or do I need to flip a switch?
There is no switch to flip. The supply detects 110V or 220V AC input (±10%) on its own, and this upgraded version no longer has the 115V/230V toggle on the rear panel.
Can I charge my phone from the front panel?
Yes. The unit has a USB port and a Type-C port, and the Type-C port supplies 5V/3.6A for charging phones or powering a device you are repairing.
What happens if my circuit shorts while it's connected?
When the load shorts, the supply stops its output and sounds a buzzer. It also has overheating, voltage-overload, power-overload, leakage and grounding protection.
What comes in the box, and can I turn off the key beep?
The box contains the power supply, an output power cord, an input power cord and a user manual. To turn off the key beep, press and hold the voltage knob for a few seconds until it beeps.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Upgraded DC Power Supply: The upgraded DC power supply integrates various advanced functions. For example, precise coding knobs, USB and type-c fast charge, OCP short circuit alerts, high-definition four-digit display and multiple security protection Settings
- Coarse and Fine Coding Knob: Unlike other coding knobs, this bench power supply is equipped with coarse and fine tuning coding knobs, the coarse tuning knob sets the value before the decimal point, and the fine tuning sets the number after the decimal point. The combination of the two knobs greatly improves efficiency
- USB and Type-C Charging Port: One of the major advantages of our variable power supply over other variable power supplies is the addition of the TYPE-C fast charging port, which is different from the normal USB charging port and has a 5V/3.6A output for quickly charging your cell phone or other device, or for charging a device to be repaired
- Short Circuit Alarm: Safety always comes first. When the load equipment is short-circuited, the adjustable power supply will automatically stop the output and emit a buzzer to remind the user. Not only that, the adjustable power supply also has the functions of grounding wire, leakage protection, overheating protection, voltage overload protection and power overload protection
- Wide Applications: The adjustable dc power supply features an intelligent temperature-controlled fan and heat sink for excellent heat dissipation and is especially suitable for laboratory, electronic repair DIY, communication equipment maintenance, products line, scientific research and teaching units
- Packaging: 1 x variable dc power supply, 1 x output power cord, 1 x input power cord, 1 x user manual. Tip: If you want to turn off the key beep, press and hold the voltage knob for a few seconds until you hear a beep, then the key beep will turn off
Full Specifications
| Brand | WANPTEK POWER |
|---|---|
| Wattage | 300 watts |
| Model Name | DPS3010U |
| Unit Count | 1 Count |
| Connectivity | USB |
| Model Number | 0-30V 0-10A |
| Compatibility | Switch |
| Built-In Media | dc power supply variable, output test line, AC power cord, user manual. |
| Connector Type | USB 2.0 |
| Cooling Method | Air |
| Number of Fans | 1 |
| Output Wattage | 300 watts |
| Item Dimensions | 8.4 x 3.4 x 5.9 inches |
| Mfr Part Number | DPS3010U |
| Compatible Devices | Laptop, Mobile Phone, Tablet |
| Connector Quantity | 2 |
| Power Supply Design | External |
| Number of Connectors | 2 |
| Warranty Description | 1 |
| Maximum Input Voltage | 30 volts_of_direct_current |
| Full listing title | DC Power Supply Variable 0-30V 0-10A, Adjustable Switching Regulated Bench Power Supply with Encoder Coarse & Fine Knob, 3.6A USB & Type-C Quick-Charge, OCP Overcurrent Protection |
Ready to buy?
DC Power Supply Variable 0-30V 0-10A, Adjustable Switching Regulated Bench Power Supply with Encoder Coarse & Fine Knob, 3.6A USB & Type-C Quick-Charge, OCP Overcurrent Protection is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Power Supplies
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- Jetson Orin Nano Super for ROS 2 Robotics: Build Guide + Real Latency Numbers
- Raspberry Pi 5 IOMMU Support Lands in Mainline Linux: What It Means
- vLLM 0.21 Adds Intel GPU Support: What It Means for Budget AI Rigs
- Best Parts for a CPU-Offload Local LLM Build in 2026
- Best Starter Kit for Learning Robotics on Raspberry Pi (2026)
- Asus ProArt PA27USD OLED Lands — and What 4K Gamers Can Buy for Less
- Local Image Generation AI in 2026: AMD Hardware Performance & Setup Guide
- Best Budget FPS Gaming Setup Under $120: Mouse, Pad, Keyboard and Headset for 2026
- Best Controller for PC and Steam Gaming in 2026: G7 SE vs 8BitDo Pro 2 vs DualSense
- Horse Riding Game Controller for PC/Mac: Buy or Build
- Best Storage Upgrades for a Legacy or Retro PC in 2026
- Best Wireless Controller for PC Gaming on Couch and Living Room (2026)
- LM Studio on an RTX 3060 12GB: Local-LLM Setup and tok/s in 2026
- Best Wireless Keyboard for Office and Hybrid Work in 2026
- RTX 4090 AIO Kit 2025: Pricing, Cooling & Buying Guide
- Best Cooler for the Ryzen 7 5800X: Noctua NH-U12S vs Cooler Master ML240L
- Best Ryzen CPU for Gaming in 2026
- Gemma 3 12B: RTX 3060 12GB vs Ryzen 7 5800X CPU Offload (2026)
- Benchmarking Open Models for Agentic Tool Use on an RTX 3060
- Best Webcam for Streaming Under $200 (2026)
- Mount a 90s Big-Box CD-ROM ISO on Win98 Without a CD Drive
- Ollama on Intel + AMD via IPEX-LLM: Docker Compose Guide
- Best Components for a Budget Local-LLM Workstation in 2026
- Best SSD for PS5 Storage Expansion Under $100 (2026)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090