Skip to main content
DC Power Supply Variable, 0-32V 0-10A Switching Bench Power Supply with 20W USB & Type-C Quick-Charge, Encoder Corase & Fine Adjustment Knob, Output Switch, 4-Digit LED Display - SPS-3010V
Jesverty

Jesverty DC Power Supply Variable (SPS-3010V)

Bottom line: The Jesverty DC Power Supply Variable ($42.49 on Amazon as of 2026-11-20 11:15 UTC): Encoder coarse/fine knobs set 0.01V and 0.001A steps with no potentiometer drift; main trade-off: bundled test leads are a give-away; buy heavier leads for sustained high current.

$42.49 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Pros & Cons

Pros

  • ✓ Encoder coarse/fine knobs set 0.01V and 0.001A steps with no potentiometer drift
  • ✓ Wide 0-32V, 0-10A output range covers logic boards, motors and battery charging
  • ✓ Output ON/OFF button lets you change settings without unplugging the load
  • ✓ USB-A and USB-C ports each deliver 20W for phones, Raspberry Pi or Arduino
  • ✓ Compact 7.1 x 3.6 x 6.2 in footprint at about 2.5 lbs saves bench space

Cons

  • ✗ Bundled test leads are a give-away; buy heavier leads for sustained high current
  • ✗ Over-current protection is listed, but no over-voltage protection is stated
  • ✗ Single output channel, so no dual or tracking rails for split-supply circuits
  • ✗ 4-digit LED readout gives less precision than 5-digit bench displays

Manufacturer description

The Jesverty SPS-3010V is a variable DC bench power supply for electronics hobbyists, repair techs and lab benches. It delivers 0-32V at up to 10A, so one unit can power a 3.3V microcontroller, a 12V motor driver or a battery-charging setup. Instead of the usual potentiometers, the SPS-3010V uses encoder coarse and fine knobs. The coarse knob sets the value before the decimal point and the fine knob sets the value after it, with a setting resolution of 0.01V and 0.001A. You can dial in an exact voltage and current limit without chasing drift. A dedicated OUTPUT button switches the terminals…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for Jesverty DC Power Supply Variable, so this read rests on the manufacturer's listed specs and the current price in the power supplies category (how we evaluate). Compare with similarly-priced alternatives in the power supplies category before committing. On the listing's own facts, the case for it is "Encoder coarse/fine knobs set 0.01V and 0.001A steps with no potentiometer drift"; the main trade-off is "Bundled test leads are a give-away; buy heavier leads for sustained high current". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Common buyer scenarios for power supplies of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

What voltage and current range does the Jesverty SPS-3010V output?

It outputs an adjustable 0-32V DC at 0-10A. The coarse and fine encoder knobs set voltage in 0.01V steps and current in 0.001A steps.

Can I charge my phone or power a Raspberry Pi from the USB ports?

Yes. It has one USB-A and one USB-C port, and both support 20W fast charging. Jesverty lists phones, Arduino UNO and Raspberry Pi boards as intended uses.

Do I need to disconnect my circuit to change the voltage?

No. The OUTPUT button turns the output terminals on and off, so you can switch the output off, change the voltage or current, and switch it back on while your load stays connected. The OPN setting can also make the output turn on as soon as the unit is powered on.

Will it work on 230V power outside the US?

The unit has selectable 115V/230V AC input. The power cord and the factory AC input setting depend on the destination country, so check the input selection before you plug it in.

Are the included test leads good enough for 10A loads?

Jesverty calls the included leads a give-away and recommends leads rated for enough current if your project draws high current for long periods. For sustained loads near 10A, buy heavier-gauge leads.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • 1️⃣【Coarse & Fine Encoder Knob】: Jesverty's SPS-V bench power supply upgrades from traditional potentiometer coarse & fine adjustment knobs to encoder coarse & fine knobs making it more convenient to set your desired voltage and current and greatly improve your work efficiency! ! The coarse knob sets the value before the decimal point, and the fine knob sets the value after the decimal point. (Setting resolution 0.01V/0.001A).
  • 2️⃣【USB-A & USB-C 20W Quick-Charge】: The Jesverty desktop power supply features Type-A and Type-C dual charging ports, both supporting 20W fast charging⚡. Convenient for charging your smartphone and powering up your Arduino UNO, Raspberry Pi, or other electronic modules for your projects.
  • 3️⃣【Output ON/OFF Button】: With a single press of the added output button, you can easily switch the output ON/OFF. When you want to adjust settings, you don't have to remove the load or turn off the power each time! !
  • 4️⃣【Functions & Protection】: AC115V/230V selectable input, OCP over-current protection, Temperature-regulated cooling fan, OPN* output status setting, etc. A bunch of convenient functions are loaded within this tiny unit! !
  • 🌟Note: OPN is a function that lets the unit output voltage and current as soon as you turn the power switch on without needing to push the "OUTPUT" button.
  • 5️⃣【Compact & Lightweight】: Jesverty power source for electronics is made even more compact, measuring only 7.1(D)x3.6(W)x6.2(H)inches and weighing approx. 2.5lbs, which can greatly save valuable space on your workbench. Perfect for applications such as laboratories, educational sites, factory manufacturing tests, maintenance repairs, battery charging, anodizing, electronic work DIY, etc.

Full Specifications

BrandJesverty
ColorUpgraded
Amperage10 Amps
MaterialAluminum, Plastic, Polycarbonate (PC)
🌟NoteOPN is a function that lets the unit output voltage and current as soon as you turn the power switch on without needing to push the "OUTPUT" button.
Unit Count1.0 Count
Form Factorbenchtop
ConnectivityUSB-C
Model NumberSPS-3010V
CompatibilitySwitch
Input Voltage115 Volts (AC)
Built-In Media1 x SPS Unit, 1 x Power Cord*, 1 set of test leads*, 1 x instruction manual
Connector TypeUSB-A, USB-C
Output Current10 Amps
Output Voltage32 Volts (DC)
Output Wattage320 Watts
Item Dimensions7.09 x 3.35 x 6.1 inches
Mfr Part NumberSPS-3010V
Specification MetCE, FCC, OCP
Enclosure MaterialAluminum, Plastic, Polycarbonate (PC)
Full listing titleDC Power Supply Variable, 0-32V 0-10A Switching Bench Power Supply with 20W USB & Type-C Quick-Charge, Encoder Corase & Fine Adjustment Knob, Output Switch, 4-Digit LED Display - SPS-3010V

Ready to buy?

DC Power Supply Variable, 0-32V 0-10A Switching Bench Power Supply with 20W USB & Type-C Quick-Charge, Encoder Corase & Fine Adjustment Knob, Output Switch, 4-Digit LED Display - SPS-3010V is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $42.49

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Related Power Supplies

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →