Skip to main content
cablecc Pitch=3.0mm ATX Molex Micro Fit Connector 4Pin Power Male to Male Cable 60cm
cablecc

cablecc Pitch=3.0mm ATX Molex Micro Fit Connector 4Pin Power Male to Male Cable 60cm

Bottom line: The cablecc Pitch=3.0mm ATX Molex Micro Fit Connector 4Pin Power Male to: 3.0mm pitch Micro-Fit housings match the ATX 4-pin 12V connector family; main trade-off: male-to-male only; won't plug directly into a standard female PSU lead.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ 3.0mm pitch Micro-Fit housings match the ATX 4-pin 12V connector family
  • ✓ 60cm length reaches across a mid-tower or out to a bench PSU
  • ✓ 20AWG UL1007 wire, thicker than many thin-gauge adapter leads
  • ✓ Male-to-male ends join two female Micro-Fit receptacles
  • ✓ Useful for custom harnesses and retro PC power restorations

Cons

  • ✗ Male-to-male only; won't plug directly into a standard female PSU lead
  • ✗ Pinout and wiring order not specified in the listing
  • ✗ 4-pin only; doesn't cover 8-pin EPS or PCIe power needs
  • ✗ No sleeving or cable management features mentioned

Manufacturer description

The cablecc 4-pin ATX Molex Micro-Fit male to male cable is a 60cm power lead for builders who need to route or bridge a power supply's 4-pin 12V connector. Both ends use Molex Micro-Fit style housings at a 3.0mm pin pitch, the same connector family used for the ATX 4-pin 12V CPU power plug. The cable uses 20AWG UL1007 wire. UL1007 is a common hookup-wire rating for internal equipment wiring, and 20AWG is thicker than the fine-gauge wire found in many generic adapter leads. At 60cm, you get enough slack to reach across a mid-tower case, up to a motherboard header from a bottom-mounted PSU…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for cablecc Pitch=3.0mm ATX Molex Micro Fit Connector 4Pin Power Male to…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the power supplies & cables category before committing. On the listing's own facts, the case for it is "3.0mm pitch Micro-Fit housings match the ATX 4-pin 12V connector family"; the main trade-off is "Male-to-male only; won't plug directly into a standard female PSU lead". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

How long is the cablecc 4-pin Micro-Fit cable?

The cable is 60cm long from connector to connector, which gives you room to route across most mid-tower cases or out to a test bench.

What wire gauge does this cable use?

It uses 20AWG UL1007 wire, a common rating for internal equipment hookup wire.

Will this work with my ATX power supply's 4-pin 12V connector?

It is built around the 3.0mm pitch Molex Micro-Fit 4-pin connector used for the ATX 4-pin 12V plug. Both ends are male, so it mates with female Micro-Fit receptacles. Check the gender of the connectors you plan to join before you buy.

Is the pinout straight-through or crossed?

The listing does not state the pin-to-pin wiring order. Verify continuity with a multimeter and compare it to your PSU and motherboard documentation before you power anything on.

Can I use this for an 8-pin EPS or PCIe power connection?

No. This is a 4-pin Micro-Fit cable. 8-pin EPS and PCIe connectors use different pin counts and keying, so you need a cable made for those connectors.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • ATX Molex Micro Fit Connector 4Pin Male to Male Power Cable
  • Length: 60cm
  • 20AWG UL1007 Cable
  • Connect your ATX power supply's 4-pin 12V connector.

Full Specifications

Brandcablecc
Length60cm
Cable TypePower
Connector TypeMicro Fit
Special FeatureMicro Fit
Compatible Devicescomputer

Ready to buy?

cablecc Pitch=3.0mm ATX Molex Micro Fit Connector 4Pin Power Male to Male Cable 60cm is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Power Supplies & Cables

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →