Skip to main content
Audient iD4 USB 2-in/2-out High Performance Audio Interface
Audient

Audient iD4 USB 2-in/2-out High Performance Audio Interface

Bottom line: The Audient iD4 USB 2-in/2-out High Performance Audio Interface: Mic/line XLR/jack combo input handles vocals, synths or outboard preamps; main trade-off: 2-in/2-out limits you to small sessions, not full-band tracking.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ Mic/line XLR/jack combo input handles vocals, synths or outboard preamps
  • ✓ Headphone amp driven by its own independent DAC
  • ✓ Zero latency monitoring for tracking without audible delay
  • ✓ Monitor Mix and Pan blend live input against DAW playback
  • ✓ ID ScrollControl mode adjusts software parameters from the interface

Cons

  • ✗ 2-in/2-out limits you to small sessions, not full-band tracking
  • ✗ Two outputs leave room for only one monitor pair
  • ✗ No MIDI ports listed in the product specs
  • ✗ Listing does not state sample rate or bit depth figures

Manufacturer description

The Audient iD4 is a USB audio interface built around a 2-in/2-out signal path for home recording, podcasting and desktop monitoring. Its high-performance AD/DA converters handle both ends of the chain: they capture what you record and play it back to your speakers or headphones. Input comes through an XLR/jack combo connector that accepts either a microphone or a line-level source. One socket can take a vocal mic, a synth or the output of an outboard preamp. On the output side, the headphone amplifier runs from its own independent DAC, so your headphones are fed separately from the main…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for Audient iD4 USB 2-in/2-out High Performance Audio Interface, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the audio & midi category before committing. On the listing's own facts, the case for it is "Mic/line XLR/jack combo input handles vocals, synths or outboard preamps"; the main trade-off is "2-in/2-out limits you to small sessions, not full-band tracking". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Can I plug a microphone into the Audient iD4?

Yes. The iD4 has an XLR/jack combo input that accepts a microphone over XLR or a line-level source over a jack cable.

How many inputs and outputs does the iD4 have?

It is a 2-in/2-out USB audio interface, which suits solo recording, podcasting and a single pair of studio monitors.

Can I hear myself without latency while recording?

Yes. The iD4 offers zero latency monitoring. The Monitor Mix and Pan controls let you balance your live input against DAW playback.

What is ID ScrollControl mode?

ID ScrollControl mode lets you use the interface to scroll and adjust on-screen parameters in your recording software, so you can make changes without reaching for the mouse.

Is the headphone output separate from the main outputs?

The headphone amplifier is fed by its own independent DAC, separate from the main AD/DA converter path. Check the manufacturer listing for headphone impedance and power ratings.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • High Performance Converters
  • ID ScrollControl Mode
  • Zero Latency Monitoring with Monitor Mix & Pan
  • High performance AD/DA converter, mic/line input via XLR/jack combo jack, headphone amplifier with independent DAC

Full Specifications

BrandAudient
Unit Count1 Count
Audio InputUSB
ConnectivityUSB
Model Number18-90008
Compatible DevicesGuitar, Headphone, Microphone, Personal Computer
Number of Channels2
Supported Software[Cubase LE, Cubasis LE for iOS, and industry-leading plugins and virtual instruments]
Maximum Sample Rate96 KHz
Connectivity TechnologyUSB
Manufacturer Part Number18-90008
Global Trade Identification Number05060374260160

Ready to buy?

Audient iD4 USB 2-in/2-out High Performance Audio Interface is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Audio & MIDI

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →