UGREEN USB Male to DB25 Female Parallel (25 Pin) Printer Cable Adapter 6FT
Bottom line: The UGREEN USB Male to DB25 Female Parallel Printer Cable Adapter 6FT: Driverless plug and play, no external power adapter needed; main trade-off: no macOS 14 Sonoma or newer support, a hard stop on current Macs.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Driverless plug and play, no external power adapter needed
- ✓ Bi-directional transfer over the parallel port, so printer status reports back
- ✓ Up to 12Mbps, compliant with USB 1.1/2.0 and IEEE 1284
- ✓ 6ft run reaches a desk-side or floor-standing dot matrix printer
Cons
- ✗ No macOS 14 Sonoma or newer support, a hard stop on current Macs
- ✗ Not compatible with Zip drives or engravers
- ✗ Printer must have a DB25 male port; Centronics 36-pin needs another cable
- ✗ Requires the printer itself to support USB-to-DB25 IEEE-1284 conversion
Manufacturer description
The UGREEN USB to DB25 parallel printer cable adapter bridges a modern USB port to legacy 25-pin parallel hardware, letting you keep a dot matrix, label, or impact printer in service long after the motherboard's LPT header disappeared. It runs 6 feet, handles data transfer up to 12Mbps, and complies with USB 1.1/2.0 and IEEE 1284, including bi-directional transfer over the parallel port so status and error reporting flow back from the printer. Setup is driverless and bus-powered, so there is no disc to hunt down and no wall wart to find a socket for. Compatibility spans Windows…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for UGREEN USB Male to DB25 Female Parallel Printer Cable Adapter 6FT, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the cables & connectors category before committing. On the listing's own facts, the case for it is "Driverless plug and play, no external power adapter needed"; the main trade-off is "No macOS 14 Sonoma or newer support, a hard stop on current Macs". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Do I need to install drivers for this USB to parallel adapter?
No. UGREEN lists this adapter as plug and play with no driver installation and no external power adapter required.
Will this work on my Mac?
It supports macOS 10.4 Tiger through macOS 13 Ventura. It is not compatible with macOS 14 Sonoma or later, so check your macOS version first.
How fast is the data transfer?
Up to 12Mbps, fully compliant with the USB 1.1/2.0 and IEEE 1284 specifications.
Can I use this with a Zip drive, scanner, or laser engraver?
No. UGREEN specifies it is not compatible with Zip drives and engravers. It is built for parallel printers, including dot matrix and label printers.
What connector and cable length do I get?
A USB male plug on one end and a DB25 female 25-pin parallel connector on the other, over a 6-foot cable. Your printer needs a DB25 male port.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Superb Parallel Printer Cable: UGREEN USB Male to DB25 Female printer adapter cable is ideal for connecting USB-equipped desktop or notebook computers to a parallel printer, dot matrix, and label printer with DB25 parallel interface
- Fast Data Transfer: The DB25 Converter supports data transfer speeds up to 12Mbps, fully compliant with USB 1.1/2.0 and IEEE 1284 specifications
- Plug and Play: No driver installation is required. No external power adapter needed. Support bi-directional data transfer over parallel port
- Wide Compatibility: This parallel cable is compatible with Windows 11/10/8/7/XP/Vista/98SE/2000, macOS 10.4 (Tiger) to macOS 13 (Ventura), Linux. Not compatible with macOS 14 (Sonoma) and above
- Note: Check your printer manufacturer to confirm whether the printer supports a USB to DB25 IEEE-1284 Parallel conversion. And make sure your printer has a DB25 male port and your PC has a USB female port that supports USB 1.1/2.0. (Not compatible with Zip drives and engravers)
Full Specifications
| Brand | UGREEN |
|---|---|
| Cable Type | USB |
| Connectivity | USB |
| Compatibility | PC, Mac, Linux |
| Plug and Play | No driver installation is required. No external power adapter needed. Support bi-directional data transfer over parallel port |
| Connector Type | Usb Male to Db25 Female |
| Special Feature | Data Transfer |
| Compatible Devices | PC with USB 1.1/2.0 Female Port, Printer with DB25 Male Port |
| Fast Data Transfer | The DB25 Converter supports data transfer speeds up to 12Mbps, fully compliant with USB 1.1/2.0 and IEEE 1284 specifications |
Ready to buy?
UGREEN USB Male to DB25 Female Parallel (25 Pin) Printer Cable Adapter 6FT is vintage hardware; the used and vintage market on eBay carries most of the live inventory. Prices and condition vary by seller and move in real time, so we link the live listing rather than quote a cached price. It also has an Amazon listing — check it for current price and availability. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Cables & Connectors
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Budget GPU for Local 12B–14B LLM Inference: Why the RTX 3060 12GB Still Wins
- Best 1TB SATA SSDs for PC Builds and Retro Upgrades
- ASUS TUF VG27AQ vs Dell G3223Q: 1440p HDR or 4K 32-Inch in 2026
- 1440p 165Hz vs 4K 60Hz: ASUS TUF VG27 vs SANSUI 27" for Gaming
- What Rig Runs an AI Agent Locally? Building for the Agent Era
- CPU Cooler Bracket Fix: How to Secure Your CPU When It Fails
- Best Controller for PC Emulation and Retro Console Crossover (2026)
- Mac Studio M3 Ultra vs RTX 5090 for AI Inference in 2026
- Train Your Own LLM From Scratch: 2026 Hardware Guide
- Ollama vs LM Studio vs GPT4All on a 12GB GPU (2026)
- Aider vs Cline vs Cursor for Local Coding on a 12GB GPU (2026)
- Best NVMe SSD for a Compact Gaming PC: WD_BLACK SN770 in 2026
- Best Budget GPU for 1440p Gaming in 2026: Is the RTX 3060 12GB Still It?
- RTX 5090 vs RTX 5070: Specs, Value & Which to Buy
- How to Find and Join Active Retro Multiplayer Servers in 2026 (Quake 3, UT99, CS 1.6, Diablo II)
- Best AM4 Upgrade Parts Under $100 Each in 2026
- Best Mouse Pad for Office Productivity and Long Hours (2026)
- Best 27-Inch 4K Gaming Monitor: KOORUI QD-Mini LED vs Samsung Odyssey
- Best CPU Cooling for AMD Ryzen Builds in 2026
- Downsized Your Homelab? Here's What It's Worth
- WoW Mythic+ 3500 on Steam Deck: Is It Possible?
- Best Budget Gaming CPU in 2026: 5 AM4 and Entry Picks Ranked
- Best SSD for Steam Deck OLED Expansion in 2026: SATA Adapter vs M.2 2230
- Best Wired Gaming Headset Under $50 for PC and Console in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090