Skip to main content
CanaKit Raspberry Pi 3 Ultimate Starter Kit - 32 GB Edition
CanaKit

CanaKit Raspberry Pi 3 Ultimate Starter Kit - 32 GB Edition

Bottom line: The CanaKit Raspberry Pi 3 Ultimate Starter Kit: Quad-core 1.2 GHz Pi 3 Model B with built-in Wi-Fi and Bluetooth; main trade-off: 1 GB RAM limits heavier desktop multitasking.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For emulation handhelds, FPGA consoles and flash carts, synthesises manufacturer documentation, community compatibility lists and independent reviews rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ Quad-core 1.2 GHz Pi 3 Model B with built-in Wi-Fi and Bluetooth
  • ✓ 32 GB Class 10 microSD comes pre-loaded with an OS for plug-and-play boot
  • ✓ 2.5A UL-listed supply with 5 ft Micro USB cable and noise filter
  • ✓ GPIO breadboard interface, ribbon cable and jumper wires included
  • ✓ RGB LED, 8 color LEDs, 15 resistors and 2 buttons for first circuits

Cons

  • ✗ 1 GB RAM limits heavier desktop multitasking
  • ✗ Pi 3 Model B is an older board generation than current Raspberry Pi models
  • ✗ microSD shows as 1 GB on a PC until you expand the partition
  • ✗ Component set is basic: no sensors, motors or displays included

Manufacturer description

The CanaKit Raspberry Pi 3 Ultimate Starter Kit puts a complete single-board computer and a beginner electronics lab in one box. At its center is the Raspberry Pi 3 Model B, with a 1.2 GHz quad-core processor, 1 GB of RAM, and on-board Wi-Fi and Bluetooth, so you can get online and pair peripherals without adding USB dongles. Setup takes little effort. The 32 GB Class 10 microSD card comes pre-loaded with an OS, so you can plug in and boot. Power comes from the CanaKit 2.5A UL-listed supply, which has a 5-foot Micro USB cable and a noise filter. The kit also includes a Raspberry Pi 3 case, a…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for CanaKit Raspberry Pi 3 Ultimate Starter Kit, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the emulation hardware category before committing. On the listing's own facts, the case for it is "Quad-core 1.2 GHz Pi 3 Model B with built-in Wi-Fi and Bluetooth"; the main trade-off is "1 GB RAM limits heavier desktop multitasking". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Do I need to install an operating system on the microSD card?

No. The included 32 GB Class 10 microSD card comes pre-loaded with an OS, so you can insert it and boot the Raspberry Pi 3 right away.

Why does the 32 GB card show up as only 1 GB on my computer?

The card is pre-partitioned, so a PC may show only the 1 GB boot partition. The remaining space is still there and can be expanded as needed.

Does the Raspberry Pi 3 in this kit have Wi-Fi and Bluetooth?

Yes. The Raspberry Pi 3 Model B has on-board Wi-Fi and Bluetooth, along with a 1.2 GHz quad-core processor and 1 GB of RAM.

What extra parts does the Ultimate kit add over the basic Starter Kit?

It adds a GPIO-to-breadboard interface board, ribbon cable, large breadboard, jumper wires, an RGB LED, 8 color LEDs, 15 resistors, 2 push buttons and GPIO and resistor reference cards.

What warranty comes with the CanaKit Raspberry Pi 3 kit?

The kit is covered by CanaKit's 1-year manufacturer warranty, which offers replacements. Check the product listing for current warranty details.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Includes Raspberry Pi 3 (RPi3) Model B Quad-Core 1.2 GHz 1 GB RAM, On-board WiFi and Bluetooth Connectivity
  • 32 GB Micro SD Card (Class 10) pre-loaded with OS, CanaKit 2.5A Power Supply with 5 feet Micro USB Cable and Noise Filter (UL Listed)
  • High Quality Raspberry Pi 3 Case, Display Cable, Heat Sink, CanaKit Full Color Quick-Start Guide
  • CanaKit GPIO to Breadboard Interface Board, Ribbon Cable, Large Breadboard, Jumper Wires, GPIO and Resistor Colors Quick Reference Cards
  • RGB LED, 8 x LEDs (Blue/Red/Yellow/Green), 15 x Resistors, 2 x Push Button Switches

Full Specifications

BrandCanaKit
CPU Speed1.2 GHz
Model NameRPi3
ConnectivityBluetooth, USB, WiFi
Model Number99151
Mfr Part Number99151
Processor BrandBroadcom
Processor Count4
Processor Speed1.2 GHz
Total Usb Ports2
Compatible Devicesbreadboard projects
RAM Memory Installed1 GB
Wireless CompabilityBluetooth
RAM Memory TechnologyLPDDR2, LPDDR3
Connectivity TechnologyGPIO, HDMI, USB
Memory Storage Capacity32 GB
Item Dimensions L x W x H9.5"L x 7.6"W x 2.1"H
Ram Memory Installed Size1 GB

Ready to buy?

CanaKit Raspberry Pi 3 Ultimate Starter Kit - 32 GB Edition is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Emulation Hardware

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →