ELEGOO
ELEGOO 120pcs Multicolored Dupont Wire M-F, M-M, F-F for Breadboard Jumper
Bottom line: The ELEGOO 120pcs Multicolored Dupont Wire M-F ($6.98 on Amazon as of 2026-10-20 22:13 UTC): All three genders included: 40 M-F, 40 M-M, 40 F-F pins; main trade-off: 20 cm may be short for larger chassis or rack runs.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-20. Price and availability subject to change.
Pros & Cons
Pros
- ✓ All three genders included: 40 M-F, 40 M-M, 40 F-F pins
- ✓ 20 cm / 8-inch length routes around cases and shields
- ✓ Ribbons peel apart for odd-spaced, non-standard headers
Cons
- ✗ 20 cm may be short for larger chassis or rack runs
- ✗ Dupont crimps are friction-fit and can loosen with reuse
- ✗ Thin gauge suits signal lines, not high-current loads
- ✗ Repeating color sequence means duplicate colors within a run
Manufacturer description
Three Connector Types In One Kit: Includes 40 male-to-male, 40 male-to-female and 40 female-to-female jumper wires for connecting breadboards, female sockets, male headers, sensors, displays and controller modules during temporary prototyping 20 cm Length With Separable Ribbons: Each 8 in lead reaches across breadboards and nearby modules without excessive slack; use the 40-wire ribbons as grouped buses or peel off smaller sections and individual wires to match your project layout Color-Code Circuits & Troubleshoot Faster: Multicolored insulation makes power, ground, clock, data and control…
SpecPicks Verdict
SpecPicks scored ELEGOO 120pcs Multicolored Dupont Wire M-F using a rating × review-volume × price-fit model applied to published specs and reviews across the cables & connectors category. ELEGOO's cables & connectors lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for cables & connectors of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
What connector types come in this 120-piece kit?
Three 40-pin ribbons: one male-to-female, one male-to-male, and one female-to-female, for 120 wires total.
How long are the ELEGOO jumper wires?
About 20 cm, or 8 inches, per cable.
Can I separate the wires from the ribbon?
Yes. The cables separate into whatever count you need, which is how they support non-standard, odd-spaced headers.
Will these work with a Raspberry Pi GPIO header and a breadboard?
The male-to-female ribbon is the standard way to go from Pi GPIO pins to breadboard rows; check your board's header pitch against the listing before ordering.
Is this a good value compared with buying single-gender packs?
For 120 wires, you get all three genders instead of one. Check the current listing for today's price.
Key Features
- Three Connector Types In One Kit: Includes 40 male-to-male, 40 male-to-female and 40 female-to-female jumper wires for connecting breadboards, female sockets, male headers, sensors, displays and controller modules during temporary prototyping
- 20 cm Length With Separable Ribbons: Each 8 in lead reaches across breadboards and nearby modules without excessive slack; use the 40-wire ribbons as grouped buses or peel off smaller sections and individual wires to match your project layout
- Color-Code Circuits & Troubleshoot Faster: Multicolored insulation makes power, ground, clock, data and control paths easier to identify during LED projects, sensor tests, classroom labs and repeated electronics experiments
- 2.54 mm Connections For Common Headers: Male pins fit compatible 0.1 in female sockets and breadboards, while female ends fit compatible 0.1 in male headers; insert connectors straight and check continuity if a signal becomes intermittent
- Copper-Clad Aluminum With PVC Insulation: The leads are designed for temporary low-voltage signal prototyping rather than mains or high-current wiring; they are not pure-copper wire, automotive jumper cables or a crimp-connector kit
Full Specifications
| Size | 8 inch |
|---|---|
| Brand | ELEGOO |
| Color | 120pcs (F-F/M-M/M-F) |
| Model | EL-CP-004 |
| Warranty | 1 Year Manufacturer |
| UnitCount | 120 |
| ReleaseDate | 2017-08-04T00:00:01Z |
| Manufacturer | ELEGOO |
| IsAdultProduct | false |
| ItemPartNumber | EL-CP-004 |
Ready to buy?
ELEGOO 120pcs Multicolored Dupont Wire M-F, M-M, F-F for Breadboard Jumper is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-20. Price and availability subject to change.
Read our analysis
SpecPicks coverage that features this Cables & Connector.
Related Cables & Connectors
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Is the RTX 3060 12GB Still Worth It for Gaming in 2026?
- LongCat-2.0: A Frontier Model Trained Without Nvidia GPUs
- Ollama vs LM Studio vs GPT4All on a 12GB GPU (2026)
- VibeThinker-3B: A 3B Reasoning Model on RTX 3060 and Raspberry Pi 4
- Build a Motion-Triggered Trail Camera With the Raspberry Pi HQ Camera (2026)
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5070
- Intel's llm-scaler-vLLM 1.4 Adds Arc Pro B70: A Cheaper Local-Inference Path?
- Best 32-Inch 4K Gaming Monitor for PS5 + PC 2026
- Best 1TB SATA SSD for Cloning Old Drives and OS Migrations 2026
- KOORUI vs Samsung Odyssey: Best 27" 4K Gaming Monitor?
- GLM-5.2 Review: Running the Top Open-Weights LLM on an RTX 3060
- IPEX-LLM + Ollama vs a CUDA RTX 3060 Rig
- Use a Raspberry Pi 4 as a Second Monitor or KVM in 2026
- Skytech Prism 4 vs MSI Codex Z2: Which Prebuilt Wins at 1440p?
- Best CPU Coolers for AMD Ryzen in 2026: 5 Picks Ranked
- NVIDIA Nemotron 3 Ultra: What It Takes to Run Locally
- Logitech G502 Hero vs Modern FPS Mice: Is the Classic Still Worth It in 2026?
- Claude Now Writes 65% of Anthropic's Code: The Local Coding-Rig Angle
- Raspberry Pi OS Moves to the Linux 6.18 LTS Kernel
- Best Budget SSDs for Homelab and Proxmox Boot Drives in 2026
- Chrome Using Too Much RAM? Fixes + Hardware Upgrades
- Qwen3.6 35B-A3B Just Cleared FoodTruck-Bench: What the MoE Sparse Path Means for 12GB Cards
- DeepSeek V3 VRAM Requirements: What 671B Really Needs
- Ryzen 5 5600G vs Ryzen 7 5700X for a 2026 Home Lab
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090