Skip to main content
chenyang mSATA Mini SATA SSD to IDE 44Pin 2.5 inch Hard Disk Case Enclosure Box White for Laptop
chenyang

chenyang mSATA Mini SATA SSD to IDE 44Pin 2.5 inch Hard Disk Case Enclosure Box White for Laptop

Bottom line: The chenyang mSATA Mini SATA SSD to IDE 44Pin 2.5 inch Hard Disk Case ($12.88 on Amazon as of 2026-11-20 23:15 UTC): Turns a 50mm mSATA SSD into a 2.5-inch 44-pin IDE laptop drive; main trade-off: accepts mSATA SSDs only, not M.2 SATA or M.2 NVMe drives.

$12.88 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Pros & Cons

Pros

  • ✓ Turns a 50mm mSATA SSD into a 2.5-inch 44-pin IDE laptop drive
  • ✓ JMicron JM20330 SATA-to-IDE bridge chip handles the protocol conversion
  • ✓ 9.5mm-thick case is a common 2.5-inch laptop drive height
  • ✓ Replaces a failing mechanical PATA drive with flash, no moving parts
  • ✓ Good fit for retro IDE laptops and older industrial notebooks

Cons

  • ✗ Accepts mSATA SSDs only, not M.2 SATA or M.2 NVMe drives
  • ✗ 44-pin laptop connector won't fit a 40-pin desktop IDE header without an adapter
  • ✗ IDE bus caps speed well below what the mSATA SSD can reach
  • ✗ SSD not included; you need to buy a compatible mSATA drive

Manufacturer description

Give an aging IDE laptop a solid-state upgrade with the chenyang mSATA to IDE 44-pin adapter enclosure. It takes a 50mm (1.8-inch) mSATA SSD and presents it as a standard 2.5-inch notebook IDE drive. Behind the white shell, a JMicron JM20330 Serial ATA bridge chip converts the SSD's SATA signal to the parallel ATA interface that older notebooks, industrial PCs and retro laptops expect. The case measures 9.5mm thick, a common 2.5-inch laptop drive height, so it is built to slide into the bay where the original spinning hard drive sat. That makes it a practical way to swap a failing or noisy…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for chenyang mSATA Mini SATA SSD to IDE 44Pin 2.5 inch Hard Disk Case…, so this read rests on the manufacturer's listed specs and the current price in the storage adapters category (how we evaluate). Compare with similarly-priced alternatives in the storage adapters category before committing. On the listing's own facts, the case for it is "Turns a 50mm mSATA SSD into a 2.5-inch 44-pin IDE laptop drive"; the main trade-off is "Accepts mSATA SSDs only, not M.2 SATA or M.2 NVMe drives". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, match it to the drive and the host: the drive interface it takes (SATA, NVMe or other), the drive sizes it accepts, whether it powers a 3.5" drive (desktop drives need 12V, which a USB port alone does not supply), and the USB or PCIe generation of the port you will plug it into, which caps the transfer speed. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will this adapter work with an M.2 SSD?

No. The listing says it is for mSATA (mini PCI-E SATA) SSDs only. M.2 SATA and M.2 NVMe drives use a different connector and won't fit.

What size mSATA SSD does it fit?

It is designed for 50mm (1.8-inch) mSATA SSDs, the full-length mSATA form factor. Shorter half-size mSATA cards may not line up with the mounting point.

Can I use it in a desktop PC with a 40-pin IDE connector?

Not directly. The adapter has a 44-pin 2.5-inch notebook IDE connector. A desktop 40-pin IDE header needs a separate 44-pin to 40-pin adapter that also supplies power.

Will it fit in my laptop's hard drive bay?

The case is 9.5mm thick, a common height for 2.5-inch laptop IDE drives. Measure your existing drive and bay before buying, especially on slim notebooks with thinner drive slots.

What chip does the adapter use?

It uses the JMicron JM20330 Serial ATA bridge chip, which converts the mSATA SSD's SATA interface to parallel IDE (PATA) for the host system.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • This adapter using JM20330 Serial ATA Bridge Chip.
  • 50mm (1.8 inches) MSATA Mini PCI-E SATA SSD to 2.5 inches Notebook IDE Adapter with case. ​
  • Case Size:70mm x 10mm X 9.5mm
  • Used with MSATA(Mini PCI-E SATA) SSD ONLY!

Full Specifications

Brandchenyang
ColorBlack for IDE-44Pin+Case
ModelCY-SA-106
UnitCount1
ManufacturerCY
ItemPartNumberFBA-SA-106

Ready to buy?

chenyang mSATA Mini SATA SSD to IDE 44Pin 2.5 inch Hard Disk Case Enclosure Box White for Laptop is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $12.88

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Related Storage Adapters

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →