Skip to main content
Unitek USB-C IDE/SATA Adapter, Dual-Drive for 2.5/3.5" HDD/SSD, 6Gbps | Simultaneous 1 IDE + 1 SATA Access; For 2.5/3.5" IDE/SATA Drives; Plug & Play, Hot-Swap, Auto Sleep; 12V Adapter Included
Unitek

Unitek USB-C IDE/SATA Adapter

Bottom line: The Unitek USB-C IDE/SATA Adapter: Reads one IDE and one SATA drive at the same time for direct drive-to-drive copies; main trade-off: 3.5" IDE drives need the separate 4-pin power cable, which means more cable clutter.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ Reads one IDE and one SATA drive at the same time for direct drive-to-drive copies
  • ✓ Dual-head IDE connector fits both 40-pin 3.5" and 44-pin 2.5" laptop drives
  • ✓ Works with CD-ROM, DVD-ROM and DVD-RW optical drives as well as HDDs and SSDs
  • ✓ 12V/2A power adapter included, so full-size 3.5" drives run without a PC PSU
  • ✓ Driver-free with hot-swap, On/Off switch and LED power/activity indicators

Cons

  • ✗ 3.5" IDE drives need the separate 4-pin power cable, which means more cable clutter
  • ✗ 6Gbps is the SATA III interface rating; real USB throughput will be lower
  • ✗ Only one IDE and one SATA drive at a time; no second port of either type
  • ✗ Bare-drive adapter with no enclosure, so drives sit exposed on your desk

Manufacturer description

The Unitek USB-C IDE/SATA Adapter lets you recover old data from legacy and modern drives with one kit. It reads one IDE drive and one SATA drive at the same time, so you can copy files from an old PATA hard drive straight onto a newer SATA SSD without a second adapter. The dual-head IDE connector covers both 40-pin (3.5-inch) and 44-pin (2.5-inch laptop) drives. A SATA III port handles 2.5-inch and 3.5-inch SATA HDDs and SSDs. Optical drives such as CD-ROM, DVD-ROM and DVD-RW also work, which helps if you are archiving old disc collections or retro PC software. The SATA interface is rated…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for Unitek USB-C IDE/SATA Adapter, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the storage adapters category before committing. On the listing's own facts, the case for it is "Reads one IDE and one SATA drive at the same time for direct drive-to-drive copies"; the main trade-off is "3.5" IDE drives need the separate 4-pin power cable, which means more cable clutter". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, match it to the drive and the host: the drive interface it takes (SATA, NVMe or other), the drive sizes it accepts, whether it powers a 3.5" drive (desktop drives need 12V, which a USB port alone does not supply), and the USB or PCIe generation of the port you will plug it into, which caps the transfer speed. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Can I connect an IDE drive and a SATA drive at the same time?

Yes. The Unitek adapter reads one IDE drive and one SATA drive at the same time, so you can transfer or back up data directly between them.

Does it work with 2.5-inch laptop IDE drives?

Yes. The dual-head IDE connector has both a 44-pin port for 2.5-inch laptop IDE drives and a 40-pin port for 3.5-inch desktop IDE drives.

Do I need to use the power adapter?

The included 12V/2A power adapter supplies stable power. The 4-pin power cable is required when you connect a 3.5-inch IDE drive and is not needed for SATA drives.

Can I use it to read old CDs or DVDs?

Yes. It supports optical drives including CD-ROM, DVD-ROM and DVD-RW, so you can connect an IDE or SATA optical drive to read discs over USB.

Do I need to install drivers, and will it work on older USB ports?

No drivers are required because it is plug-and-play. It connects over USB-C and is backward compatible with USB 2.0 and USB 1.1, though transfers will be slower on those ports.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • 【Dual-Drive Simultaneous Access & Wide Compatibility】Read one IDE drive and one SATA drive at the same time for efficient data transfer or backup. The dual-head IDE connector (40-pin and 44-pin) and a SATA III port support 2.5"/3.5" IDE HDDs, 2.5"/3.5" SATA HDDs and SSDs, plus optical drives like CD-ROM, DVD-ROM, and DVD-RW.
  • 【USB-C Super Speed up to 6Gbps】Transfer files at speeds up to 6Gbps through the SATA III interface, 10 times faster than USB 2.0. Backward compatible with USB 2.0 and 1.1. The USB-C connection port ensures a reliable, modern link to your computer.
  • 【Plug-and-Play with Helpful Built-In Functions】No driver installation required. Supports hot-swapping for quick drive changes. The On/Off switch safeguards your drives, LED indicators show power and activity status, and the adapter automatically enters sleep mode after 30 minutes of inactivity.
  • 【Stable Power Supply for Reliable Operation】The included 12V/2A power adapter provides stable electricity for dependable performance. The dedicated 4-pin power cable is required when connecting a 3.5-inch IDE drive. It is not needed for SATA drives.
  • 【Complete Kit & Dedicated Support】You'll receive the USB-C adapter, a USB-C to Micro USB data cable, a 4-pin power cable, a 12V/2A power adapter, and 24/7 customer email support. Everything you need to start transferring data right out of the box.

Full Specifications

BrandUnitek
ColorType-C Hard Drive Adapter
FinishHdmi
Unit Count1 Count
ConnectivityUSB-C
Model NumberY-3322C
CompatibilitySwitch
Input Voltage12 volts
Connector TypeUSB Type C
Item Dimensions3.8 x 2.7 x 0.63 inches
Mfr Part NumberY-3322C
Number of Items1
Number of Ports1
Power Plug TypeType A - 2 pin (North American)
Compatible DevicesLaptop
Item dimensions L x W x H3.8 x 2.7 x 0.63 inches
Specific Uses For ProductLaptop
Full listing titleUnitek USB-C IDE/SATA Adapter, Dual-Drive for 2.5/3.5" HDD/SSD, 6Gbps | Simultaneous 1 IDE + 1 SATA Access; For 2.5/3.5" IDE/SATA Drives; Plug & Play, Hot-Swap, Auto Sleep; 12V Adapter Included

Ready to buy?

Unitek USB-C IDE/SATA Adapter, Dual-Drive for 2.5/3.5" HDD/SSD, 6Gbps | Simultaneous 1 IDE + 1 SATA Access; For 2.5/3.5" IDE/SATA Drives; Plug & Play, Hot-Swap, Auto Sleep; 12V Adapter Included is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Storage Adapters

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →