Skip to main content
ALITOVE 500pcs WS2811 Individually Addressable RGB LED Pixels Light 12mm Round Diffused Color Changing Bullet Pixel Light Outdoor DC 12V IP68 Waterproof for Billboard House Halloween Christmas Decor
ALITOVE

ALITOVE 500pcs WS2811 Individually Addressable RGB LED Pixels Light 12mm Round Diffused Color Changing Bullet Pixel Light Outdoor DC 12V IP68 Waterproof for Billboard House Halloween Christmas Decor

Bottom line: The ALITOVE 500pcs WS2811 Individually Addressable RGB LED Pixels Light ($114.40 on Amazon as of 2026-10-07): 500 pixels in one buy - 10 strings of 50 WS2811 bullet pixels; main trade-off: JST-SM connectors are not waterproof - you seal those joints yourself.

$114.40

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.

Pros & Cons

Pros

  • ✓ 500 pixels in one buy - 10 strings of 50 WS2811 bullet pixels
  • ✓ Per-pixel addressing at 256 brightness levels and 24-bit color
  • ✓ IP68 silicone-sealed housing rated for rain, snow, and underwater use
  • ✓ 3-pin JST-SM ends plus power/ground leads for chaining and power injection
  • ✓ Works with Arduino, Pi, SP108E WiFi, SP105E/SP107E BT, T1000S, K1000C

Cons

  • ✗ JST-SM connectors are not waterproof - you seal those joints yourself
  • ✗ Needs a separate 12V supply and controller, neither included
  • ✗ 500 pixels at full white draws serious current; power injection is mandatory
  • ✗ 12mm diffused bullets suit outlines and grids, not tight-pitch matrices

Manufacturer description

ALITOVE's 500-pixel WS2811 string kit is built for people who want per-LED control outdoors and don't want to rebuild the display every spring. Each of the ten 50-pixel strings carries 12mm round diffused F8 bullet pixels with a WS2811 driver IC on board, so you address every pixel independently across 256 brightness levels and 24-bit color for a 16,777,216-color range. The whole assembly is silicone-sealed to IP68, with cold- and UV-resistant rubber wire, which is why ALITOVE rates it for snowstorms, rainstorms, and even submerged use. Wiring is the usual pixel-project setup: 3-pin JST-SM…

SpecPicks Verdict

SpecPicks scored ALITOVE 500pcs WS2811 Individually Addressable RGB LED Pixels Light… using a rating × review-volume × price-fit model applied to published specs and reviews across the rgb & lighting category. ALITOVE's rgb & lighting lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for rgb & lighting of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

How many LEDs do you actually get, and how are they split up?

You get 500 WS2811 pixels total, supplied as strings of 50 F8 RGB bullet pixels each. Each pixel is a cut point, so you can shorten a string or join strings with the included 3-pin JST-SM connectors.

Can I leave these up outside year-round?

The pixels themselves are sealed in silicone to IP68 and the wire is cold- and UV-resistant rubber, which ALITOVE rates for snowstorms, rainstorms, and long-term outdoor or underwater use. The JST connectors are not waterproof, so weatherproof those junctions yourself.

What controller do I need to run them?

Any WS2811 SPI controller works. ALITOVE lists Arduino and Raspberry Pi, T1000S and K1000C, the SP105E and SP107E Bluetooth controllers, SP108E WiFi, SP103E RF, and the SP601E/SP602E/SP611E/SP110E family. A controller is not included.

Do I need a separate power supply?

Yes. These run on DC 12V and no power supply is included. Both ends of each string break out power and ground wires so you can inject 12V mid-run, which matters at 500 pixels where voltage drop dims and color-shifts the far end.

Are they bright and colorful enough for a house display?

Each pixel does 256-level brightness and 24-bit color for 16,777,216 colors, individually set. The 12mm round diffused lens spreads light rather than spotlighting it, which is why buyers use these for roofline outlines, billboards, and Halloween or Christmas displays.

Key Features

  • 【Individually addressable LED 】 This is digitally-addressable WS2811 LED pixel string lights. Per string has 50pcs F8 RGB LED chips and WS2811 smart IC. You can set the color of each LED and their brightness individually! 256-level brightness and 24-bit color display, achieve 16777216 colors full color display.
  • 【IP68 waterproof and Durable】 We sealed all the components in a housing with silicone, making its waterproof grade reach IP68. The wires are made of cold-resistant, UV-resistant rubber. Superior materials and design enables it to withstand extreme bad weather such as snowstorm, rainstorm, etc, suitable for long-term outdoor and underwater use.
  • 【Easily connect and cut】 It comes with 3pin JST-SM connectors and separate power/ground wires on both ends. You can hook up multiple strips together to make it longer and inject power in case of voltage drops. Each pixel can be cut off. So you can shorten or extend the distance, great for DIY lighting projects.(Please note that JST connectors are not waterproof)
  • 【Compatible with many controllers】 It can be programmed with Arduino, Raspberry Pi, T1000S, K1000C controllers and controlled by ALT-C01, SP105E Bluetooth controllers, SP107E SP601E SP602E P608E SP611E SP110E Bluetooth music controllers, SP108E WiFi controllers, SP103E mini RF controllers and any other WS2811 SPI controllers.
  • 【Wide Application】 Thanks to the excellent waterproof design, it is widely used in various indoor and outdoor commercial lighting decoration projects, such as outdoor billboards, LED screens, LED wall, hotel, KTV, bars, city skyline, building outline decoration and so on.

Full Specifications

BrandALITOVE
ColorRGB (Red, Green, Blue)
StyleModern
ThemeOutdoor
SeasonsWinter
Voltage12 volts_of_direct_current
Wattage150 watts
Occasionseasonal decorations
Unit Count115 Feet
Form FactorStrip Lights
Item Length130 feet
Light ColorMulticolor
ConnectivityBluetooth, WiFi
Model NumberWS2811-12V
Power SourceDC 12V
Material TypePlastic
Product StyleModern
Control MethodRemote
Item Dimensions1574.8 x 3.94 x 1.97 inches
Number of Items1

Ready to buy?

ALITOVE 500pcs WS2811 Individually Addressable RGB LED Pixels Light 12mm Round Diffused Color Changing Bullet Pixel Light Outdoor DC 12V IP68 Waterproof for Billboard House Halloween Christmas Decor is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $114.40

*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.

Related RGB & Lighting

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →