Systor 1:7 HDD/SSD Hard Drive Duplicator
Bottom line: Per its Amazon listing, the Systor 1:7 HDD/SSD Hard Drive Duplicator: COMPATIBILITY : Fits both 3.5" and 2.5" hard drives without the need of an adapter.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ COMPLETE STANDALONE : No computer or software required
- ✓ Backed by Systor's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Systor 1:7 HDD/SSD Hard Drive Duplicator, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the drives & media category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for drives & media of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- COMPLETE STANDALONE : No computer or software required
- WARRANTY: 1 year parts, 3 years labor, lifetime technical support
- COMPATIBILITY : Fits both 3.5" and 2.5" hard drives without the need of an adapter
- TRANSFER RATE : Copy multiple hard disk drives or solid state drives simultaneously at speeds up to 300MB per second (18GB per minute); copy speed will remain the same even if the number of load is increased
- DUPLICATION & SANITIZATION: Copy systems and files (data only) or whole hard drive; erase hard disk drives or solid state drives, compliant to DoD 5220.22-M data sanitization
Full Specifications
| Brand | Systor |
|---|---|
| Color | Dual Port/Hot Swap |
| WARRANTY | 1 year parts, 3 years labor, lifetime technical support |
| Model Name | SYS307DP |
| Read Speed | 300 megabytes_per_second |
| Unit Count | 1 Count |
| Form Factor | 2.5-inch, 3.5-inch |
| Media Speed | 300 |
| Model Number | SYS307DP |
| COMPATIBILITY | Fits both 3.5" and 2.5" hard drives without the need of an adapter |
| Built-In Media | HDD/SSD Duplicator |
| Hard Disk Size | 18 GB |
| Item Type Name | 1:7 SATA 2.5" & 3.5" Dual Port/Hot Swap Hard Disk Drive / Solid State Drive (HDD/SSD) Clone Duplicator/Sanitizer (300MB/s) |
| Hard-Drive Size | 18 GB |
| Mfr Part Number | SYS307DP |
| Number of Items | 1 |
| Special Feature | Hot Swappable |
| Hardware Platform | PC |
| Compatible Devices | Laptop |
| Data Transfer Rate | 18 gigabits_per_second |
| Full listing title | Systor 1:7 HDD/SSD Hard Drive Duplicator - 18GB/Min - SYS307DP | Supports 2.5" Solid State Drives & 3.5" SATA Hard Drives, Standalone Duplicator, Eraser & Sanitizer, 300MB/Sec Drive Copy |
Ready to buy?
Systor 1:7 HDD/SSD Hard Drive Duplicator - 18GB/Min - SYS307DP | Supports 2.5" Solid State Drives & 3.5" SATA Hard Drives, Standalone Duplicator, Eraser & Sanitizer, 300MB/Sec Drive Copy is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Drives & Media
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- Modern Retro Console Mods: 2026 Upgrade Guide
- Anthropic's Samsung Chip Talks: Why Local Inference on an RTX 3060 Still Matters
- Best CPU for Streaming and Gaming Under $300: Ryzen 7 5800X vs 5700X vs 5600G
- Best PC Gaming Upgrades Under $30 in 2026
- Can a 12GB RTX 3060 Still Run 2026's Local LLMs?
- Mount a 90s Big-Box CD-ROM ISO on Win98 Without a CD Drive: The CompactFlash + IDE Workflow
- Best Fight Stick and Pad for Fighting Games on PC (2026)
- pxpipe Hides Prompts in PNGs to Cut Claude Code Tokens 70% — Or Just Run Local on an RTX 3060
- Best Sim Racing Wheel for PC and Console in 2026
- Self-Host a 24/7 FM Radio Station on a Raspberry Pi Zero 2W
- How to Filter Steam Deck's 20K+ Games by FPS, Price, HLTB
- LiquidAI LFM2.5-8B-A1B: An 8B MoE You Can Run on a 12GB RTX 3060
- Cosmos3-Super on an RTX 3060 12GB: Can the #1 Open-Weights Image Model Run Local?
- BOSGAME VTA-439: AMD Ryzen AI 9 HX 470 Mini PC for Linux
- Raspberry Pi Zero W Projects for Beginners in 2026
- Step 3.7 Flash Benchmarks: What You Can Actually Run on 12GB
- Prebuilt Gaming PCs 2026: RTX 5060 vs 5060 Ti vs 5070
- Gemma 4 31B Abliterated on a Single RTX 3060 12GB: Quantization, VRAM, and Real Tok/s
- LattePanda Sigma vs Raspberry Pi 4 8GB: x86 Windows SBC vs ARM Linux for Edge AI Workloads in 2026
- Building a 1999 GeForce 256 + Pentium III Win98 Rig in 2026
- Putting a Modern SATA SSD in a Win98/XP Retro Build via an IDE Bridge
- RTX 3060 12GB vs RTX 4070 Super for Local LLMs (2026): Same VRAM, 40% More Bandwidth
- GPU & CPU Upgrade ROI: Cost-per-FPS Calculator Guide
- What Handheld Console Should I Buy in 2026? A Decision Framework
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090