YMDK
110-Pack Stainless Steel Custom Cherry MX Springs for Cherry Gateron MX switches Springs Replacement (150g)
Bottom line: The YMDK 110-Pack Stainless Steel Custom Cherry MX Springs ($5.95 on Amazon as of 2026-10-06): Heavy 150g weight for a firm, deliberate keystroke; main trade-off: not compatible with Kailh switches.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Heavy 150g weight for a firm, deliberate keystroke
- ✓ Fits Cherry MX and Gateron MX switches
- ✓ 110 springs per pack, enough for a full keyboard swap
- ✓ Stainless steel build resists wear over time
Cons
- ✗ Not compatible with Kailh switches
- ✗ 150g is very heavy, too stiff for many typists
- ✗ Requires switch opening or hot-swap to install
- ✗ Springs only; switch housings not included
SpecPicks Verdict
SpecPicks scored YMDK 110-Pack Stainless Steel Custom Cherry MX Springs using a rating × review-volume × price-fit model applied to published specs and reviews across the accessories category. YMDK's accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- This springs is made of Stainless Steel.It's used for switch DIY.
- Compatible for Cherry Gateron MX switches
- Kailh switches is not compatible
- The spring length is 15mm,the diameter is around 3.85mm
Full Specifications
| Brand | YMDK |
|---|---|
| Color | Silver |
| Weight | 150g |
| Material | Stainless Steel |
| Terminal | Solder |
| Unit Count | 1 Count |
| Switch Type | Cherry Gateron Mx |
| Circuit Type | 1-way |
| Contact Type | Normally Open |
| Control Type | Key Press |
| Actuator Type | Push Button |
| Compatibility | Switch |
| Material Type | Stainless Steel |
| Mounting Type | PCB Mount, Through Hole Mount |
| Connector Type | Clamp |
| Control Method | Touch |
| Operation Mode | ON-ON-ON |
| Controller Type | Push Button |
| Item Dimensions | 0.59 x 0.47 inches |
| Number of Items | 110 |
Ready to buy?
110-Pack Stainless Steel Custom Cherry MX Springs for Cherry Gateron MX switches Springs Replacement (150g) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Best Budget Gaming Monitor Under $300 in 2026
- Save $550 on iBuyPower RTX 5070 + 7800X3D 4K Gaming PC
- Best Travel Gaming Kit in 2026: 5 Picks for Hotels and Flights
- Best CPU Coolers for Ryzen and Intel Builds in 2026
- Sound Blaster Live! vs Audigy FX for a 2002 Win98/XP Bridge Build
- Qwen 3.6 27B vs Gemma 4 31B Local Inference: VRAM, Tok/s, and Quality Across Quantizations
- Sound BlasterX G6 for Retro Gaming PC Audio in 2026
- PebbleOS Comes to the Raspberry Pi RP2350: What the Port Means for Tinkerers
- When Gemini Debugs Your Linux Boot: Agentic Sysadmin on a Local RTX 3060 Rig
- Best Streaming Setup for Sim Racing in 2026: Cam, Mic, Light
- Best Storage Upgrades for a Legacy or Retro PC in 2026
- Codex Now Drives Windows PCs: The Local-Agent Rig You Can Build Instead
- Best Plug-and-Play Retro Gaming Consoles in 2026: 5 Picks
- Best Budget Gaming Monitor in 2026: 5 Picks From 1440p to 4K
- AMD Ryzen AI Max 400 'Gorgon Halo': 192GB Unified Memory for Local LLMs
- Best Parts for a Multi-User Local LLM Server in 2026
- DIY NVIDIA 3D Vision Emitter: Building One with an RP2040
- Anthropic Shutdown Reignites the AI-Sovereignty Debate — and the Case for Local Inference
- LattePanda Sigma GPU: What Its Graphics Really Offer
- The Budget Streaming Starter Kit: Mic, Light, and Webcam Under $250
- KOORUI vs Samsung Odyssey: Best 27-inch 4K Gaming Monitor in 2026
- 256GB microSD Drops to $32 — but for a Game Library, a SATA SSD Still Wins
- Best SATA SSD to Upgrade Your PS4 Pro Storage in 2026
- Best Raspberry Pi Starter Kit for Beginners in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090