What are the alternatives to the iUniker Raspberry Pi 4 Cooling Fan - 30x30x7mm Brushless CPU Fan for Pi 4, 3…?

iUniker Raspberry Pi 4 Cooling Fan - 30x30x7mm Brushless CPU Fan for Pi 4, 3… competes with other Emulation Hardware products on SpecPicks. Use our Compare tool to view specs side-by-side, or browse the full Emulation Hardware category for alternatives.

iUniker

Raspberry Pi 4 Cooling Fan - 30x30x7mm Brushless CPU Fan for Pi 4, 3, 2, 1 B+, RetroFlag NESPI Case (2-Pack)

Name: iUniker Raspberry Pi 4 Cooling Fan - 30x30x7mm Brushless CPU Fan for Pi 4, 3, 2, 1 B+, RetroFlag NESPI Case (2-Pack)
Brand: iUniker
SKU: B076H3TKBP
Price: 5.89 USD
Availability: InStock

By SpecPicks Editorial · Verified 2026-07-22

$5.89

Buy on Amazon — $5.89 Compare to similar emulation hardware

*Price sourced from Amazon.com. Last updated 2026-07-22. Price and availability subject to change.

Bottom line: The Raspberry Pi 4 Cooling Fan - 30x30x7mm Brushless CPU Fan for Pi 4, 3, 2, 1 B+, RetroFlag NESPI Case (2-Pack) is a niche pick — read recent reviews before buying in the emulation hardware category, priced around $5.89. Read recent reviews carefully before committing.

Suitable for Raspberry Pi B / Raspberry Pi B+ / Raspberry Pi A+ / Raspberry Pi 2 and Pi 3 Model B / Raspberry Pi 3 B+Bearing Type: SleeveSize (L x W x H): 3 x 3 x 0.7 cmConnector: 2 pinRated Voltage: DC 3.0-5.8VCurrent: 0.1ASpeed: 6000RPM±10%Airflow: 5m³/hNoise Level: 18dba±10%Wire Length: 60 mmColor: BlackPackage Includes:2x iUniker Cooling Fan2x Screw Sets

SpecPicks Verdict

SpecPicks classifies iUniker Raspberry Pi 4 Cooling Fan - 30x30x7mm Brushless CPU Fan for… as a niche pick — read recent reviews before buying in the emulation hardware category, based on our editorial and benchmark analysis and our ranking model that weights rating × review-volume × price-fit. iUniker's positioning sits within the broader category mid-tier. Use the Compare tool to put it side-by-side with two or three close alternatives before clicking through to Amazon.

Common buyer scenarios for emulation hardware of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the Amazon listing before purchase. Prices, stock, and Prime eligibility update directly from Amazon's catalog and may have moved since this page was last verified.

Pros & Cons

Pros

✓ Fits RetroFlag NESPI Case Perfectly.
✓ Backed by iUniker's warranty and support channels
✓ Ships via Amazon with Prime eligibility and the standard returns policy

Cons

✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
✗ Price, stock, and Prime eligibility update from Amazon and may have changed since this page was last verified

Key Features

Fits RetroFlag NESPI Case Perfectly.
Upgrade bearing of this fan not only can make sure outputing a lot of wind,but also quiet enough.
Completely solve the overheating problem of you Pi.
Comes with screw sets.
Efficient drop temp of your Pi by using our fan.

Full Specifications

Brand	iUniker
Model	IU-RP-036
Voltage	5.8 Volts
Wattage	3 watts
Material	Plastic
Dimensions	30x30x7mm
Unit Count	1 Count
Noise Level	18 Decibels
Part Number	IU-RP-036
Material Type	Plastic
Cooling Method	Air
Number of Items	4
Air Flow Capacity	5 Cubic Meters Per Hour
Compatible Devices	Single-Board Computers

Ready to buy?

iUniker Raspberry Pi 4 Cooling Fan - 30x30x7mm Brushless CPU Fan for Pi 4, 3, 2, 1 B+, RetroFlag NESPI Case (2-Pack) is available on Amazon with Prime shipping and the full Amazon returns policy. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

*Price sourced from Amazon.com. Last updated 2026-07-22. Price and availability subject to change.