Easycargo 30mm Fan 5V 3.3V DC Quiet Fan for Raspberry Pi 5 4 3B+ 3007 (4-Sets)
Bottom line: The Easycargo 30mm Fan 5V 3.3V DC Quiet Fan for Raspberry Pi 5 4 3B+ 3007: Dual-speed wiring: 3.3V for near-silence, 5V for max airflow; main trade-off: 30mm frame moves less air than 40mm Pi cooler fans.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Dual-speed wiring: 3.3V for near-silence, 5V for max airflow
- ✓ Rated 15.92dBA, quiet enough for a desk-side emulation box
- ✓ 30,000-hour sleeve bearing rating on a 30mm frame
- ✓ Fits Pi 5, Pi 4 and Pi 3 B+ plus other dev boards
Cons
- ✗ 30mm frame moves less air than 40mm Pi cooler fans
- ✗ No airflow (CFM) or static pressure spec published
- ✗ Sleeve bearing, not ball bearing — orientation can shorten life
- ✗ No mounting screws or GPIO fan header listed in the features
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Easycargo 30mm Fan 5V 3.3V DC Quiet Fan for Raspberry Pi 5 4 3B+ 3007, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the emulation hardware category before committing. On the listing's own facts, the case for it is "Dual-speed wiring: 3.3V for near-silence, 5V for max airflow"; the main trade-off is "30mm frame moves less air than 40mm Pi cooler fans". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Hypro sleeve fan suitable for Raspberry Pi 5, Pi 4 and Pi 3 B+.
- One-to-Two wire connector Interface for dual speed mode (3.3V and 5V DC)
- Low noise (15.92dBA), Long life (30,000 hours)
- Compatible with other robotic projects and development boards
Full Specifications
| Brand | Easycargo |
|---|---|
| Voltage | 3.3 volts |
| Wattage | 600 milliamp_hours |
| Material | Copper |
| Unit Count | 1 Count |
| Noise Level | 15.92 db |
| Part Number | ES-F04RPI3010 |
| Material Type | Copper |
| Cooling Method | Air |
| Number of Items | 4 |
| Number of Packs | 4 |
| Air Flow Capacity | 1.79 cfm |
| Compatible Devices | Raspberry pi 3, Raspberry pi 4 B, Raspberry pi 5 |
| Power Connector Type | 5v pin |
| Maximum Rotational Speed | 5000 rpm |
| Item Dimensions L x W x H | 1.18"L x 1.18"W x 0.3"H |
Ready to buy?
Easycargo 30mm Fan 5V 3.3V DC Quiet Fan for Raspberry Pi 5 4 3B+ 3007 (4-Sets) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Emulation Hardware
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Hobbyist Turns a Raspberry Pi and ADS-B Into a Viral Real-Time Airport Tracker
- GLM-5.2 Local: What GPU Actually Runs the Top Open-Weights LLM
- Qwen3.6-27B at 72 Tok/s on RTX 3090: What's Real
- Dual Radeon AI PRO R9700 Workstation: 64 GB Local LLM Build
- Build a Pi Zero W Handheld Retro Emulator in 2026: Full Parts List and Setup
- Best SATA/IDE-to-USB Adapters for Ripping Old Drives in 2026
- Gemma 3 12B: RTX 3060 12GB vs Ryzen 7 5800X CPU Offload (2026)
- Best Budget GPU for CNN and Image-Model Training in 2026: The RTX 3060 12GB Deep Dive
- GPT-5.5-Cyber vs Mythos: Can You Run Cyber-Eval Models Locally?
- Did the Steam Deck Get a New Box Design? What Changed
- Dual RTX 3060 12GB: 24GB of VRAM for GLM-5.2 on a Budget?
- Best Sim Racing Wheel for Forza Horizon 6 on PC in 2026
- Best SATA SSD for a Retro Windows XP or 98 Build (2026)
- Best Webcam for Streaming and Video Calls Under $200 (2026)
- ComfyUI on an RTX 3060 12GB: Stable Diffusion Setup and Real tok-per-image Math
- Best PlayStation 5 Controllers in 2026: 5 Picks for Every Player
- ASUS TUF 27" 1440p vs Samsung Odyssey G5 32": Best High-Refresh Esports Monitor
- Crucial BX500 1TB vs Samsung 870 EVO: Best SATA SSD for a Budget or Retro Build (2026)
- Best 32-Inch 4K Gaming Monitor for PS5 + PC 2026
- Retro Console Modding Services: What to Expect in 2026
- Anthropic's Samsung Chip Talks: Why Local Inference on an RTX 3060 Still Matters
- Build a Silent Home NAS on a Raspberry Pi 4 8GB With a SATA SSD (2026)
- Ryzen 7 5800X + RTX 3060 12GB: Best 1440p AM4 Build
- Gemini 3.5 Flash Can Drive Your Screen — Build a Local Agent Rig Instead
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090