Skip to main content
SJJX 2 Player HAPP Style Zero Delay Generic Game Controller USB to Joystick for MAME & Raspberry Pi 1/2/3 RetroPie DIY Projects
SJ@JX

SJJX 2 Player HAPP Style Zero Delay Generic Game Controller USB to Joystick

Bottom line: The SJJX 2 Player HAPP Style Zero Delay Generic Game Controller USB to: Two zero delay USB encoders in one pack, one board per player; main trade-off: listing describes encoders; included sticks and buttons not detailed.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ Two zero delay USB encoders in one pack, one board per player
  • ✓ Listed as a direct fit for Sanwa joysticks and Sanwa push buttons
  • ✓ Supports Raspberry Pi 1, 2 and 3 running RetroPie
  • ✓ Works with all Windows systems for MAME and PC emulator builds
  • ✓ Shows up as a generic USB game controller, so controls map in MAME

Cons

  • ✗ Listing describes encoders; included sticks and buttons not detailed
  • ✗ No Raspberry Pi 4 or Pi 5 support stated in the listing
  • ✗ macOS and desktop Linux compatibility not specified
  • ✗ Requires hands-on wiring and control panel assembly before play

Manufacturer description

Building a two-player arcade cabinet or a RetroPie bartop? The SJJX 2 Player HAPP Style Zero Delay USB Encoder pack gives you two encoder boards, one for each player. They turn arcade joysticks and push buttons into a generic USB game controller that your system recognizes. Each board is sold as a zero delay encoder. DIY builders use this type of interface for MAME and other emulators where input lag matters. Plug a board into a USB port and it shows up as a joystick, so you can map your controls inside MAME, RetroArch or EmulationStation. The listing says the encoders fit Sanwa joysticks…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for SJJX 2 Player HAPP Style Zero Delay Generic Game Controller USB to…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the joysticks & game port category before committing. On the listing's own facts, the case for it is "Two zero delay USB encoders in one pack, one board per player"; the main trade-off is "Listing describes encoders; included sticks and buttons not detailed". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Does the SJJX encoder work with RetroPie on a Raspberry Pi?

Yes. The listing names Raspberry Pi 1, 2 and 3 running RetroPie as supported. Support for newer Pi models is not stated, so check with the seller before using a Pi 4 or Pi 5.

How many players can I wire with this pack?

The pack contains 2 zero delay encoder boards. You can wire one board per player for a two-player control panel, with each board connecting over its own USB port.

Will these encoders work with Sanwa joysticks and buttons?

The listing says the encoders are a perfect fit for Sanwa joysticks and Sanwa push buttons. For other brands, compare the connector type with your parts before wiring.

Can I use this USB encoder with MAME on a Windows PC?

Yes. The listing says it supports all Windows systems, and the board shows up as a generic USB game controller that you can map in MAME's input settings.

Are the joystick and push buttons included with the encoders?

The listing is about the 2 encoder boards and does not clearly say whether sticks or buttons are included. Check the product listing for the full contents before you plan your build.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Zero Delay Arcade USB Encoder For Your Pc Game DIY!
  • Use this Encoder you can build your own Arcade Game Machine!
  • 2 PCS 100% Zero Delay Pc Encoder!
  • Perfect fit for SANWA Joystick & SANWA Push Buttons!
  • Support All windows systems & Raspberry Pi Retropie Projects!

Full Specifications

BrandSJ@JX
Color17
ConnectivityUSB
CompatibilityPC
Button Quantity16
Controller TypeJoystick
Hardware Platformpc
Compatible DevicesPC, Windows
Additional FeaturesErgonomic
Connectivity TechnologyUSB
Manufacturer Part Number424*2
Full listing titleSJJX 2 Player HAPP Style Zero Delay Generic Game Controller USB to Joystick for MAME & Raspberry Pi 1/2/3 RetroPie DIY Projects

Ready to buy?

SJJX 2 Player HAPP Style Zero Delay Generic Game Controller USB to Joystick for MAME & Raspberry Pi 1/2/3 RetroPie DIY Projects is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Joysticks & Game Port

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →