EG STARTS American Style Arcade Competition 2Pin Bat Joystick Switchable from 8 Ways Operation, Elliptical Handle, Precision 8-Way 0.187" (4.8mm) Terminal (Red)
Bottom line: The EG STARTS American Style Arcade Competition 2Pin Bat Joystick: Four microswitches rated for 1,000,000 actuations each; main trade-off: bat-top feel differs from Japanese ball-top sticks many fighters prefer.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Four microswitches rated for 1,000,000 actuations each
- ✓ Standard 0.187" (4.8mm) terminals fit common spade connectors
- ✓ Replaceable switches in a plastic base holder extend service life
- ✓ Fits wood or metal control panels for cabinets and fight sticks
- ✓ Elliptical bat handle gives an authentic American arcade grip
Cons
- ✗ Bat-top feel differs from Japanese ball-top sticks many fighters prefer
- ✗ Plastic switch base holder, not a metal one
- ✗ Wires and encoder board not listed; confirm the box contents before you buy
- ✗ Panel mounting requires drilling and hardware work
Manufacturer description
The EG STARTS American Style Arcade Competition Bat Joystick is for builders who want the classic tall bat-top feel in a DIY cabinet, bartop, or fight stick. It mounts in wood or metal control panels. The elliptical red handle gives you the grip-and-throw style of American arcade sticks, not the ball-top feel of Japanese parts. Inside, four microswitches handle the 8-way movement. EG STARTS rates them for 1,000,000 actuations, which matters if your cabinet gets daily use or hosts long fighting-game sessions. Each switch uses 0.187" (4.8mm) terminals, the common quick-disconnect size, so you…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for EG STARTS American Style Arcade Competition 2Pin Bat Joystick…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the joysticks & game port category before committing. On the listing's own facts, the case for it is "Four microswitches rated for 1,000,000 actuations each"; the main trade-off is "Bat-top feel differs from Japanese ball-top sticks many fighters prefer". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
What size connectors do I need to wire this joystick?
Each microswitch uses 0.187" (4.8mm) terminals, so you need 4.8mm female quick-disconnect (spade) connectors to attach your wiring.
How do I wire the NO and COM pins on the switches?
Connect the NO pin to the signal or function input on your encoder for that direction. Connect the COM pin to the ground loop shared across your controls.
How long do the microswitches last?
The joystick has 4 microswitches, and EG STARTS rates each one for 1,000,000 actuations. They sit in a plastic base holder, so a worn switch can be replaced on its own.
Can I mount this joystick in a wooden or metal arcade panel?
Yes. EG STARTS says it works with both wood and metal controllers, so it suits DIY cabinets, bartops, and fight-stick enclosures.
Does it come with a USB encoder or wiring harness?
The product listing does not say that an encoder or harness is included. Check the current listing for the box contents, and plan to source an encoder and 4.8mm-terminal wiring if they are not listed.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Used for all wood or metal controllers.
- New design High quality American style joystick. with 8-way smoothness
- The switch is easy to use and can be easily replaced. Plastic base holder 0.187 "4.8 mm connection
- The NO interface is the signal / function pin to the 4.8 mm connection. The COM interface is a ground loop
- Each joystick contains 4 high quality microswitches. The service life is 1,000,000 times.
Full Specifications
| Brand | EG STARTS |
|---|---|
| Color | Red |
| Theme | Arcade Gaming |
| Unit Count | 1 Count |
| Model Number | 5949b82e-cdc2-4b3c-9647-c775d633a71b |
| Power Source | Battery Powered |
| Compatibility | Switch |
| Material Type | Plastic |
| Operation Mode | Manual |
| Item Dimensions | 5.12 x 3.15 x 3.54 inches |
| Number of Packs | 1 |
| Number of Players | 1 |
| Educational Objective | Enhance hand-eye coordination and reflexes through interactive gaming |
| Supported Battery Types | No batteries required |
| Manufacturer Part Number | TYMS-JOYSTICK |
| Manufacturer Minimum Age (MONTHS) | 216 |
Ready to buy?
EG STARTS American Style Arcade Competition 2Pin Bat Joystick Switchable from 8 Ways Operation, Elliptical Handle, Precision 8-Way 0.187" (4.8mm) Terminal (Red) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Joysticks & Game Port
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- NVFP4 on RTX 50-Series: What llama.cpp's Native FP4 Support Means for Local Inference
- Can a 12GB RTX 3060 Run Bonsai 27B, the New Open Reasoning Model?
- Build a Retro Emulation Handheld on Raspberry Pi Zero W with RetroPie
- GameSir G7 SE vs 8BitDo Pro 2 vs DualSense for PC
- Intelligence Index v4.1 Goes Agentic: Can a 12GB RTX 3060 Keep Up Locally?
- Best Gaming Webcam and Streaming Setup in 2026
- 10 Raspberry Pi Projects for Kids to Build in 2026
- Microsoft + Nvidia AI PCs Run Real Agents: The Local Hardware That Matches (2026)
- Windows NT Now Boots on the Nintendo GameCube: What the Homebrew Port Actually Runs
- Raspberry Pi vs AMD GPUs for Local LLMs: What the Specs Show
- 16% of Freelance Jobs Are Now AI-Doable: The Local Agent Rig That Runs Them
- Best Gaming CPU for 1080p and 1440p Builds in 2026
- Ah Yes, 'Gaming' Laptops: The Hype vs. Reality
- Raspberry Pi OS Gets a Desktop Refresh: What Changes for Pi 4 Users
- Best CompactFlash to IDE Adapter for Win98 SE Builds in 2026
- GeForce 4 Ti 4600 Won't Boot in Windows XP — Field Troubleshooting Guide
- Qwen 3.6 27B on a 12GB RTX 3060: Which Quant Actually Fits?
- Can a Raspberry Pi 4 Run a Local LLM? Ollama tok/s Tested
- Alienware AW3426DW Review: QD-OLED Ultrawide Gaming at $699
- Intel Panther Lake on Linux: First Core Ultra X7 Numbers Land
- Sega Genesis Mini vs SNES Classic Edition: Which Mini Console Wins in 2026?
- Best Ryzen CPU for Gaming in 2026
- RetroPie Handheld Shells in 2026: Pick the Right Pi for Your DIY Handheld
- Why a Red Hat Engineer Ditched ARM64 for AMD Ryzen (Linux AI Builds)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090