Scientific Americas Rubber ESD Anti-Static HIGH Temperature Soldering MAT
Bottom line: Per its Amazon listing, the Rubber ESD Anti-Static HIGH Temperature Soldering MAT: top layer Static-“Dissipative Layer” ( 0.5mm thickness ); bottom Layer Conductive layer (1.5mm thickness).
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Top layer Static-“Dissipative Layer” ( 0.5mm thickness )
- ✓ Backed by Scientific Americas's warranty and support channels
Cons
- ✗ Check battery runtime and RPM/CFM specs match your case size and cleaning frequency
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
24" X 36'' With 2 MM Thickness, Durable and high quality ESD mat have superior heat-, chemical-, and wear-resistance. Feature two layers rubber; the top layer is dissipative and the bottom layer is conductive. Available in Blue. Dual Bench Ground Mount for Single Conductor Wrist Straps. This is a good complement to our mat grounding cord as it will install under the work bench and provide long term solution. It also provides more workable surface area ( the mat grounding usually is mounted on the corner, top left or right of the mat).
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Rubber ESD Anti-Static HIGH Temperature Soldering MAT, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the tools & maintenance category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Durable and high quality ESD mat have superior heat-, chemical-, and wear-resistance
- Top layer Static-“Dissipative Layer” ( 0.5mm thickness )
- Bottom Layer Conductive layer (1.5mm thickness)
- Resistance: RTT:3.8 x 10^6 to 1 x 10^8, RTG:2.4 x 10^7 to 1x 10^8, Surface:<10^4 to <10^7
- Heat resistance (600oF, 10 sec no smell, no melt)
Full Specifications
| Brand | Scientific Americas |
|---|---|
| Color | Blue |
| Display | lcd or led |
| Resistance | RTT:3.8 x 10^6 to 1 x 10^8, RTG:2.4 x 10^7 to 1x 10^8, Surface:<10^4 to <10^7 |
| Display Type | lcd or led |
| Model Number | 5D-JP1A-EYE9 |
| Item Type Name | Mat |
| Included Components | Mat |
| Temperature Stability | 600 degrees_fahrenheit |
| Manufacturer Part Number | 24x36-RDB-B |
| Item Dimensions D x W x H | 0.08"D x 24"W x 0.08"H |
| Full listing title | Rubber ESD Anti-Static HIGH Temperature Soldering MAT - 24" X 36" (2' X 3') - 0.08" Thick - Dual Bench and Wrist Strap - Blue |
Ready to buy?
Rubber ESD Anti-Static HIGH Temperature Soldering MAT - 24" X 36" (2' X 3') - 0.08" Thick - Dual Bench and Wrist Strap - Blue is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
More reviews from the SpecPicks archive
Browse all reviews →- Sub-$300 4K Mini-LED Gaming Monitors Hit the Mainstream
- Meta Is 'Token Managing' Now: Cut Local-LLM Cost on a Single RTX 3060
- Blue Yeti vs HyperX QuadCast 2 S: Best Streaming Mic Under $200
- Headset Mic vs USB Mic for Discord and Twitch: Recon 50 vs Blue Yeti
- Arc A770 16GB vs RTX 3060 12GB for Local Llama 3
- Qwen3 Local: RTX 3060 12GB Build vs Mac Mini for Inference
- How to run Llama 3.1 8B on Arc B580
- Home Assistant on a Raspberry Pi 4 8GB: 2026 Smart-Home Hub Build
- KOORUI 27" 4K vs Samsung Odyssey 27" 4K: Best 4K Monitor for Console & PC Gaming
- Cactus Hybrid Router: Gemma4-2B Local + Gemini Fallback
- Voodoo 5 6000 FSAA: The Feature That Never Engaged
- How to Make Steam Deck Intros Last Longer (2026)
- Ah Yes, 'Gaming' Laptops: The Hype vs. Reality
- Beyond LLMs: How Agent Logic Scales Enterprise AI
- Best Gaming Monitors for Console and PC in 2026
- 1440p Gaming PC Build 2026: Cost, Parts, FPS
- Best SSD for a PS4 Pro Upgrade in 2026
- Building a Silent Windows 98 Gaming PC in 2026: The Full Parts List
- Building a Period-Correct Windows 98 Gaming PC in 2026: Parts, Pitfalls, and Driver Archaeology
- Raspberry Pi Home Automation Projects: A 2025 Starter Guide
- Running Mistral's New OCR Model Locally on a 12GB GPU
- Can You Build an $800 Gaming PC in 2026? Parts + Cost
- Ryzen CPU Deals 2026: 5600X, 5800X3D and 9800X3D Price Lines
- Qwen 3.6 27B vs Gemma 4 31B Local Inference: VRAM, Tok/s, and Quality Across Quantizations
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090