Skip to main content
SUNMON Microphone Pop Filter Mask Shield, Compatible with HyperX QuadCast S USB Gaming Microphone, Mic Wind Cover Screen for Home Recording Studio, Singing Broadcast Studio (Black Windscreen)
SUNMON

SUNMON Microphone Pop Filter Mask Shield

Status: SUNMON Microphone Pop Filter Mask Shield: Unavailable on Amazon as of . SpecPicks has no in-stock listing with matching specs on file; the search below lists current offers. eBay sellers may still list this model new or used.

Bottom line: The SUNMON Microphone Pop Filter Mask Shield: Fits mics 45-68 mm in diameter, including AT2020, Rode NT-USB and Razer Siren X; main trade-off: does not fit the Blue Yeti, per the manufacturer.

Unavailable on Amazon as of

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Currently unavailable on Amazon. Not the same product — 3 in-stock alternatives:

Similar: HyperX QuadCast 2 — $119.99 on Amazon as of 2026-11-20 23:14 UTC (price may vary).

Similar: Logitech Creators Blue Yeti USB Microphone for PC — $69.99 on Amazon as of 2026-11-21 02:13 UTC (price may vary).

Similar: RØDE NT1 5th Gen Large-Diaphragm Studio… — $248.00 on Amazon as of 2026-11-21 02:13 UTC (price may vary).

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ Fits mics 45-68 mm in diameter, including AT2020, Rode NT-USB and Razer Siren X
  • ✓ Listed as compatible with the HyperX QuadCast S USB gaming mic
  • ✓ Double-layer mesh cuts harsh P and S plosives in vocals and voiceovers
  • ✓ Swivel mount for quick installation and removal
  • ✓ Doubles as a dust and moisture cover between recording sessions

Cons

  • ✗ Does not fit the Blue Yeti, per the manufacturer
  • ✗ Mics under 45 mm or over 68 mm in diameter won't seat properly
  • ✗ Listing gives no weight, material or warranty details
  • ✗ Targets plosives and breath noise, not room echo or reverb

Manufacturer description

SUNMON 2 inch Microphone Pop Filter Mask Shield, Mic Wind Cover Screen for Home Recording studio, Singing Broadcast StudioOur Pop Filter Mask Shield is specially designed to improved your audio quality when you recording, singing or broadcasting.When you are going to record a video, voice over or other audio recordings, you unwanted background noises, wind and harsh "P" and "S" sounds.It's easy to solve these problems and fix those issues by use the SUNMON 2 inch Microphone Pop Filter Mask Shield. Easy to install, remove and clean.It is particularly effective in reducing pops and ticks…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for SUNMON Microphone Pop Filter Mask Shield, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the streaming gear category before committing. On the listing's own facts, the case for it is "Fits mics 45-68 mm in diameter, including AT2020, Rode NT-USB and Razer Siren X"; the main trade-off is "Does not fit the Blue Yeti, per the manufacturer". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Studio Microphone Mic Wind Screen Pop Filter Mask Shied ideal for podcasting, voiceovers or screen captures.
  • UNIVERSAL COMPATIBILITY - Our microphone pop filter suitable for 45 mm to 68 mm diameter microphones,such as AT2020, AT2035, AT4040, AT2050, AT2020+, Samson Meteor , Scarlett CM25 ,CAD GXL2400, Apogee, Razer Siren X, BADAAX Mic, Rode NT1A, Rode NT-USB, MXL 770, MXL 910, MXL 2010, CAD U37, BM-800 and many other microphones(NOT Fit Blue Yeti Mic).
  • Double layer mesh windscreen eliminates the plosive popping and unwanted background noises.
  • Wind Screen is convenient and easy use. Swivel mount for easy installation.
  • Let your loved mic stay away from dust and moisture, and always keep it clean and health.

Full Specifications

BrandSUNMON
ColorQuadCast Pop Fliter
Model Name8541753648
Unit Count1 Count
ConnectivityUSB
Model Number8541753648
Power SourceCorded Electric
Polar PatternUnidirectional
Built-In MediaMicrophone
Connector TypeUSB
Frequency Range20Hz 20kHz
Mfr Part Number8541753648
Number of Items1
Number of Packs1
Special FeatureGaming, USB
Antenna LocationPodcasting, Singing, Speech, Video Recording, Voice Recording
Hardware PlatformPC, Smartphone, Tablet
Compatible DevicesPersonal Computer
Enclosure MaterialMesh
Number of Channels1
Full listing titleSUNMON Microphone Pop Filter Mask Shield, Compatible with HyperX QuadCast S USB Gaming Microphone, Mic Wind Cover Screen for Home Recording Studio, Singing Broadcast Studio (Black Windscreen)

Ready to buy?

Amazon shows no buyable offer for SUNMON Microphone Pop Filter Mask Shield at the last check. A similar in-stock product is HyperX QuadCast 2. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

View Similar — $119.99

Related Streaming Gear

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
This listing is unavailable. Similar, in stock:
HyperX QuadCast 2
Similar, in stock — $119.99 →