Skip to main content
Arcade Stick DIY Kit 10x Buttons with Logo LED MX 8 Way Joystick USB Encoder for PC MAME Raspberry Pi Color Mix
SJ@JX

SJ@JX Arcade Stick DIY Kit 10x Buttons

Bottom line: The SJ@JX Arcade Stick DIY Kit 10x Buttons: 10 LED-lit buttons with a logo on each, glowing during play; main trade-off: kit only: no enclosure or control panel included.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Check price on Amazon → Compare to similar single board computers

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ 10 LED-lit buttons with a logo on each, glowing during play
  • ✓ Mechanical black-switch microswitches rated for 50 million presses
  • ✓ Zero-delay SJ@JX 822B USB encoder for low input lag
  • ✓ No-solder assembly: plug the buttons and joystick into the board
  • ✓ Works with Windows PC, MAME, and Raspberry Pi RetroPie

Cons

  • ✗ Kit only: no enclosure or control panel included
  • ✗ Linear black switches give no tactile bump or click feedback
  • ✗ Single 8-way joystick, not a two-player setup out of the box
  • ✗ SJ@JX parts are harder to source than Sanwa or Seimitsu

Manufacturer description

The button stays glowing while you work. There is a logo on each button.Each button contains a mechanical keyboard microswitch, BLACK SWITCH Linear, non-clicky, Recycling 50 million times.Zero delay SJ@JX 822B original USB encoder, Perfect fit LED button.Easy Installation Design! Just connected the push button and joystick, All designed by SJ@JX.Perfectly compatible with Windows and Raspberry Pi with RetroPie.Package Includes:1 x 822B USB Encoder Board1 x USB Cable1 x Joystick1 x 5pin Cable for Joystick10 x Cables for Buttons10 x 28mm LED Buttons(There is a logo on each button, Show on the…

SpecPicks Verdict

SpecPicks scored SJ@JX Arcade Stick DIY Kit 10x Buttons using a rating × review-volume × price-fit model applied to published specs and reviews across the single board computers category. SJ@JX's single board computers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for single board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

  • The button stays glowing while you work. There is a logo on each button.
  • Each button contains a mechanical keyboard microswitch, BLACK SWITCH Linear, non-clicky, Recycling 50 million times.
  • Zero delay SJ@JX 822B original USB encoder, Perfect fit LED button.
  • Easy Installation Design! Just connected the push button and joystick, All designed by SJ@JX.
  • Perfectly compatible with Windows and Raspberry Pi with RetroPie.

Full Specifications

BrandSJ@JX
ColorMix
Model NameArcade Stick DIY Kit
ConnectivityUSB
Model Number722943980927
Power SourceCorded Electric
CompatibilityPC, Switch
Button Quantity10
Controller TypeJoystick
Hardware PlatformDesktop
Compatible DevicesPC, Windows
Additional FeaturesMechanical keyboard microswitches, Easy installation design
Included Components1 x 822B USB Encoder Board, 1 x USB Cable, 1 x Joystick, 1 x 5pin Cable for Joystick, 10 x Cables for Buttons, 10 x 28mm LED Buttons
Connectivity TechnologyUSB
Manufacturer Part Number822b-gre
Full listing titleArcade Stick DIY Kit 10x Buttons with Logo LED MX 8 Way Joystick USB Encoder for PC MAME Raspberry Pi Color Mix

Hardware benchmark data

Ready to buy?

Arcade Stick DIY Kit 10x Buttons with Logo LED MX 8 Way Joystick USB Encoder for PC MAME Raspberry Pi Color Mix is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
Arcade Stick DIY Kit 10x Buttons with Logo LED MX 8 Way Joystick USB Encoder for PC MAME Raspberry Pi Color Mix
View on Amazon →