Skip to main content
SDTC Tech 4 Pin Male IDE Molex to 15 Pin Female Dual SATA Power Splitter Adapter Cable 18AWG Copper Serial ATA Hard Drive Extension Cable (20cm) - 2 Pack
SDTC Tech

SDTC Tech 4 Pin Male IDE Molex to 15 Pin Female Dual SATA Power Splitter Adapter Cable 18AWG Copper Serial ATA Hard Drive Extension Cable (20cm) - 2 Pack

Bottom line: The SDTC Tech 4 Pin Male IDE Molex to 15 Pin Female Dual SATA Power: Turns one 4-pin Molex plug into two 15-pin SATA power connectors; main trade-off: 20cm length may not reach drives in separate, distant bays.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ Turns one 4-pin Molex plug into two 15-pin SATA power connectors
  • ✓ 1007-rated 18AWG copper wire sized for drive power runs
  • ✓ 2-pack powers up to four SATA devices from two Molex leads
  • ✓ Lets older Molex-only PSUs run SATA HDDs, SSDs and optical drives
  • ✓ Short ~20cm run cuts cable slack in tight drive cages

Cons

  • ✗ 20cm length may not reach drives in separate, distant bays
  • ✗ Molex has no 3.3V line, so SATA devices that need that rail won't run
  • ✗ Two drives share one Molex lead's current; don't stack power-hungry HDDs
  • ✗ Power only; each drive still needs its own SATA data cable

Manufacturer description

Does your older power supply have spare 4-pin Molex leads but no SATA power plugs? The SDTC Tech Molex to Dual SATA Power Splitter Cable converts one 4-pin male IDE Molex plug into two 15-pin female SATA power connectors, so one lead can power two drives. Each cable uses 1007-rated 18AWG copper wire and is about 20cm long. That is long enough to reach a nearby drive bay or feed two stacked drives without a loose loop of cable to tie down. The pack includes two splitters, so you can bring up to four SATA devices online from two Molex leads. The splitter works with SATA hard drives, solid…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for SDTC Tech 4 Pin Male IDE Molex to 15 Pin Female Dual SATA Power…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the power supplies & cables category before committing. On the listing's own facts, the case for it is "Turns one 4-pin Molex plug into two 15-pin SATA power connectors"; the main trade-off is "20cm length may not reach drives in separate, distant bays". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

What connectors are on each end of this cable?

One end has a 4-pin male IDE Molex plug that connects to your power supply's Molex lead. The other end splits into two 15-pin female SATA power connectors that plug into your drives.

How long is the cable and what wire does it use?

Each cable is about 20cm long and uses 1007-rated 18AWG copper wire.

How many cables come in the pack?

The pack has two cables. Each cable powers two SATA devices, so the pack can power up to four drives from two Molex leads.

Which devices can I power with it?

The listing names SATA hard drives, solid state drives, CD-ROM drives and DVD drives. Any device with a standard 15-pin SATA power input can use it.

Will this let my old power supply run SATA drives in a retro PC build?

Yes, as long as the power supply has a spare 4-pin Molex lead. Adapting older Molex-only power supplies to SATA devices is what this cable is for. It carries power only, so each drive still needs its own SATA data cable.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • IDE Molex to SATA Power Cable, Converts 4-Pin male plug into 2x 15-Pin Serial ATA Female Connectors.
  • Cable: 1007 18AWG, Length: approx. 20cm, Conductor: Copper.
  • Installation: Connect to motherboard 4-Pin IDE Molex Connector and the other side Connect to15-Pin Hard Drives or CD ROM Drives Plug.
  • Use to adapt older power supply uints for use with new SATA devices, and powering two devices from one interface.
  • Application: suitable for Hard Drives, Solid State Drives, CD ROM Drives, HHD, SSD, DVD Drives etc.

Full Specifications

BrandSDTC Tech
Cable1007 18AWG, Length: approx. 20cm, Conductor: Copper.
Cable TypeSATA
Applicationsuitable for Hard Drives, Solid State Drives, CD ROM Drives, HHD, SSD, DVD Drives etc.
InstallationConnect to motherboard 4-Pin IDE Molex Connector and the other side Connect to15-Pin Hard Drives or CD ROM Drives Plug.
Connector Type4
Special FeatureBraided
Compatible DevicesDVD Player

Ready to buy?

SDTC Tech 4 Pin Male IDE Molex to 15 Pin Female Dual SATA Power Splitter Adapter Cable 18AWG Copper Serial ATA Hard Drive Extension Cable (20cm) - 2 Pack is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Power Supplies & Cables

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →