Skip to main content
Keyboard Puller Keycap Removal Tool and 200 Pcs Rubber O-Ring Dampeners Plumbing Rubber O-Ring Seal for Switch and Mechanical Keyboard
Fiada

Keyboard Puller Keycap Removal Tool and 200 Pcs Rubber O-Ring Dampeners Plumbing Rubber O-Ring Seal for Switch and Mechanical Keyboard

Bottom line: The Keyboard Puller Keycap Removal Tool and 200 Pcs Rubber O-Ring: 200 O-rings covers a 104-key board with ~96 spares; main trade-off: wire puller can scratch keycap sides if pulled at an angle.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For keyboards, mice, headsets and other PC peripherals, synthesises manufacturer specs and independent reviews rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ 200 O-rings covers a 104-key board with ~96 spares
  • ✓ 8mm OD / 5mm ID / 1.5mm thick fits Cherry-style stems
  • ✓ Rings soften bottom-out for quieter typing in shared rooms
  • ✓ Transparent storage box keeps loose rings from scattering

Cons

  • ✗ Wire puller can scratch keycap sides if pulled at an angle
  • ✗ Single 1.5mm thickness only, no thinner or thicker options
  • ✗ O-rings shorten key travel, which some typists dislike
  • ✗ Puller is steel wire, not the sturdier ring-style plastic type

Manufacturer description

The Fiada keycap puller and O-ring dampener kit is the low-cost entry point to a quieter, cleaner mechanical keyboard. You get a single 15 cm (5.9 inch) wire-style keycap puller plus 200 rubber O-rings in a transparent storage box, which is enough coverage for a full-size 104-key board with roughly 96 spares for future swaps or a second keyboard. The O-rings measure 8 mm outer diameter, 5 mm inner diameter, and 1.5 mm thick, the standard dimension for Cherry-style stems on most mechanical keyboards. Installation is a two-step job: seat the puller under a keycap, lift straight up, then slide…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for Keyboard Puller Keycap Removal Tool and 200 Pcs Rubber O-Ring…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the gaming peripherals category before committing. On the listing's own facts, the case for it is "200 O-rings covers a 104-key board with ~96 spares"; the main trade-off is "Wire puller can scratch keycap sides if pulled at an angle". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

How many keys will 200 O-rings cover?

Enough for a full-size 104-key keyboard with roughly 96 rings left over for a second board or replacements. The kit ships with 200 rings plus one puller and a storage box.

Will these O-rings fit my keyboard?

The rings are 8 mm outer diameter, 5 mm inner diameter, and 1.5 mm thick, which is the standard size for mechanical keyboards using Cherry-style keycap stems. Confirm your keycaps use a cross stem before ordering.

How much noise do the O-rings actually remove?

They cushion the bottom-out impact, so the hard clack when a key hits the plate becomes a softer thud. They do not quiet the switch click itself on clicky switches like blues.

How do I install them?

Place the puller under the keycap and lift it straight up vertically, slide an O-ring onto the underside of the cap around the stem, then press the cap back onto the switch. No tools beyond the included puller are needed.

Can I use the puller just for cleaning?

Yes. The 15 cm puller removes caps so you can clear dust and debris off the switch plate, then reseat the caps with or without rings. Store the puller somewhere dry to keep the wire from corroding.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Method of application: simplicity in usage, place the puller at the bottom of the keyboards, pull keycap out vertically, then place the o-ring on the bottom of the keycap and finally return keyboards back to original state
  • Easy preservation: portable and lightweight, you can keep keyboard puller in dry place to protect it against corrosion; Plumbing dampeners are packed in a transparent storage box, so these small items are not easy to lose if you put them in the box
  • Size: the keycap puller is approx. 15 cm/ 5.9 inches in length, the o-ring is approx. 8 mm/ 0.3 inch outer diameter, approx. 5 mm/ 0.2 inch in inner diameter and 1.5 mm/ 0.06 inch in thickness, standard size for mechanical keyboard use
  • Wide application: the keyboard and dampeners can help you to clean the keyboard easily and can reduce noise, give the keys a pleasant soft bottom out
  • What you get: you will receive 1 piece of keyboard puller, 200 pieces of keyboard plumbing dampeners, plus a storage box, so there are are enough dampeners for you to use and change

Full Specifications

BrandFiada
ColorBlack
StyleContemporary
MaterialMetal, Rubber
CompatibilitySwitch
Special FeatureLightweight
Wide applicationthe keyboard and dampeners can help you to clean the keyboard easily and can reduce noise, give the keys a pleasant soft bottom out
Compatible DevicesKeyboard
Included ComponentsKeyboard puller, 200 x Rubber dampeners, 1 x Storage box
Keyboard DescriptionMechanical keyboard with keycap removal tool and noise-reducing o-rings
Connectivity TechnologyBluetooth
Recommended Uses For ProductGaming, Office

Ready to buy?

Keyboard Puller Keycap Removal Tool and 200 Pcs Rubber O-Ring Dampeners Plumbing Rubber O-Ring Seal for Switch and Mechanical Keyboard is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Gaming Peripherals

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →