Coolerguys 12vDC Waterproof IP67 Fan (High Speed, 80x25mm)
Bottom line: The Coolerguys 12vDC Waterproof IP67 Fan ($15.95 on Amazon as of 2026-10-06): 44.3 CFM at 3500 RPM with 5.54 mmH2O static pressure for restrictive grills and filters; main trade-off: 3500 RPM high-speed tune is audible; not a quiet-build fan.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ 44.3 CFM at 3500 RPM with 5.54 mmH2O static pressure for restrictive grills and filters
- ✓ IP67 sealing against water and dust for outdoor and workshop enclosures
- ✓ Dual ball bearings rated 67,000 hours at 25C
- ✓ Tach output on the 3-pin Molex lets you monitor real RPM
- ✓ Runs from -40C to +70C, covering unheated garages and hot racks
Cons
- ✗ 3500 RPM high-speed tune is audible; not a quiet-build fan
- ✗ 80x25mm only, so no 92mm or 120mm option in this listing
- ✗ 3-pin Molex means no PWM duty-cycle control, just tach reporting
- ✗ IP67 housing and ball bearings add cost over a basic 80mm sleeve-bearing fan
Manufacturer description
The Coolerguys 12vDC Waterproof IP67 Fan is an 80x25mm high-speed cooling fan built for enclosures where a standard case fan would fail. It moves 44.3 CFM at 3500 RPM with 5.54 mmH2O of static pressure, so it pushes air through mesh, filters, and cramped retro PC cases instead of just stirring it around. The IP67 rating seals the motor against moisture and dust, which is why you see this Coolerguys fan in outdoor cabinets, industrial equipment, server closets, and 3D printer enclosures as often as in a vintage AT tower. Dual ball bearings carry a 67,000-hour rating at 25C, and the operating…
SpecPicks Verdict
SpecPicks scored Coolerguys 12vDC Waterproof IP67 Fan using a rating × review-volume × price-fit model applied to published specs and reviews across the retro cpu coolers & fans category. coolerguys's retro cpu coolers & fans lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
How much air does this 80mm fan actually move?
44.3 CFM at 3500 RPM, with 5.54 mmH2O of static pressure, so it holds airflow through filters, mesh, and dense heatsink fins rather than stalling.
Is this fan loud?
It is a high-speed 3500 RPM model built for airflow and static pressure, not silence. The listing does not publish a dBA figure, so check the product page if noise level is your deciding factor.
What does the IP67 rating mean for real use?
IP67 means the housing is sealed against dust and against temporary water immersion, which is why it suits outdoor cabinets, industrial gear, and dusty workshop enclosures.
Will it work outside in cold or hot conditions?
The rated operating range is -40C to +70C, covering unheated garages, attic racks, and enclosed industrial equipment.
Can I monitor the fan speed from my motherboard?
Yes. The 3-pin Molex connector carries a tachometer signal, so a board or fan controller can read actual RPM. It does not include a PWM control wire.
Key Features
- Powerful Cooling Performance – 80mm 12V DC high-speed fan delivers 44.3 CFM airflow at 3500 RPM with strong 5.54 mmH2O static pressure.
- IP67 Waterproof & Dustproof – Built to withstand moisture, dust, and debris for outdoor, industrial, and harsh environment cooling applications.
- Reliable Dual Ball Bearings – Rated for 67,000 hours lifespan at 25°C, ensuring durability and long-term use.
- Tachometer Monitoring – 3-Pin Molex connector with tach output allows precise fan speed monitoring and system integration.
- Wide Temperature Range – Operates from -40°C to +70°C, ideal for industrial equipment, servers, electronics enclosures, and 3D printers.
Full Specifications
| Brand | coolerguys |
|---|---|
| Model | CG8025H12-IP67 |
| Voltage | 12 Volts (DC) |
| Wattage | 9 watts |
| Material | Polybutylene Terephthalate |
| Unit Count | 1.0 Count |
| Noise Level | 38 Decibels |
| Part Number | CG8025H12-IP67 |
| Material Type | Polybutylene Terephthalate |
| Cooling Method | Air |
| Number of Items | 1 |
| Air Flow Capacity | 44.3 Cubic Feet Per Minute |
| Compatible Devices | Yacht/Boat Systems, Exterior and Outdoor AV Systems |
| Included Components | fan |
| Power Connector Type | 3-Pin |
| Maximum Rotational Speed | 3500 RPM |
| Item Dimensions L x W x H | 0.98"L x 3.15"W x 3.15"H |
Ready to buy?
Coolerguys 12vDC Waterproof IP67 Fan (High Speed, 80x25mm) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Cerebras Running GPT-5.4 and GPT-5.5 Internally: What the CFO's Slip Tells Us About Wafer-Scale Inference
- Reve 2.0 Debuts at #2: Can You Run Competitive Image Models on an RTX 3060 12GB?
- How Secure Is My Homelab Compared to Big Companies?
- Best Single-Board Computer Kits for Beginners (2026)
- Best AMD GPU for 4K Gaming in 2026
- Logitech G920 vs HORI Overdrive for Sim Racing in 2026
- Best Budget GPU for Stable Diffusion: Why the RTX 3060 12GB Still Wins
- Build a Home AI Assistant on a Raspberry Pi 4 8GB in 2026
- 2000s LAN Party Modern Setup Guide: Hardware, Cables, and Server Stack in 2026
- Best Plug-and-Play Retro Console to Buy in 2026
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget Homelab and Virtualization Box in 2026
- Voodoo 5 6000 Benchmarks: Quake III at Five Resolutions
- Best Wireless Controller for PC Gaming in 2026
- Voodoo3 3000 vs GeForce 256: 1999 Glide vs OpenGL Showdown
- NVMe vs SATA for Game Load Times: WD Blue SN550 vs Crucial BX500 in 2026
- Best 1440p Monitor for the RTX 3060 in 2026: Picks That Actually Match
- Can the Ryzen 5 5600G Run Local LLMs Without a GPU?
- Noctua NH-U12S vs Cooler Master ML240L RGB for a Ryzen 7 5800X gaming build: which cooler actually holds…
- Best Raspberry Pi Accessories for Home-Lab Builds in 2026
- Intel Arc Pro B60 AI: 24GB VRAM for Local LLMs in 2026
- Intel's Bartlett Lake Core 9 273PQE Reportedly Loses to a Four-Year-Old CPU
- Best GPU for Local LLMs Under $350: Why the RTX 3060 12GB Still Wins
- Fix Windows 98 SE on 1GB+ RAM: The Vcache Gotcha
- Best Game Controllers for PC and Console (2026)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090