SATA 4 Port Card with 4 Cables - SATA 3.0 6 Gbps PCIe Controller
Bottom line: The JESOT SATA 4 Port Card with 4 Cables: Four SATA 3.0 ports at 6 Gbps each, backward compatible with 1.5 and 3 Gbps drives; main trade-off: no RAID on the card; arrays depend on motherboard RAID support.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Four SATA 3.0 ports at 6 Gbps each, backward compatible with 1.5 and 3 Gbps drives
- ✓ Marvell 88SE9215 controller with FIS-based and command-based port multiplier support
- ✓ No driver needed on Windows XP through 10, Mac, Linux or NAS systems
- ✓ Fits PCIe x1, x4, x8 and x16 slots, so a spare x1 slot is enough
- ✓ Includes 4 SATA cables and a low-profile bracket for slim cases
Cons
- ✗ No RAID on the card; arrays depend on motherboard RAID support
- ✗ Booting from the card works only for single drives, not RAID volumes
- ✗ Included cables carry data only; each drive still needs PSU SATA power
- ✗ Four ports max; bigger NAS builds may need a second card or an HBA
Manufacturer description
The JESOT SATA 4 Port Card adds four SATA 3.0 ports to your PC through a single PCIe slot, so you can connect more hard drives, SSDs or optical drives when your motherboard runs out of onboard connectors. Each port runs at up to 6 Gbps and also works with older 1.5 Gbps and 3 Gbps SATA devices, so older drives in a retro or legacy build still work. The controller uses the Marvell 88SE9215 chip and supports both FIS-based and command-based port multiplier switching. It fits PCIe x1, x4, x8 and x16 slots, so you can use a spare short slot and leave the long slots free for your graphics card. A…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for JESOT SATA 4 Port Card with 4 Cables, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the expansion cards category before committing. On the listing's own facts, the case for it is "Four SATA 3.0 ports at 6 Gbps each, backward compatible with 1.5 and 3 Gbps drives"; the main trade-off is "No RAID on the card; arrays depend on motherboard RAID support". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for expansion cards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will this SATA card work in a PCIe x1 slot?
Yes. The JESOT card fits PCIe x1, x4, x8 and x16 slots, so you can use a short x1 slot and leave the larger slots open.
Do I need to install drivers for it?
No. The listing says no driver is needed on Windows XP, 7, 8 and 10, Mac, Linux and NAS operating systems.
Can I boot my operating system from a drive on this card?
Yes, you can boot from a drive on the card as long as it is not part of a RAID array. The listing also says Windows can be installed from a Win10 PE environment.
Does the card support RAID?
The card has no RAID of its own. If your motherboard has a RAID function, you can build a RAID array that includes drives on this card.
What comes in the box, and will it fit a small case?
The package has the 4-port Marvell 88SE9215 card, four SATA data cables and a low-profile bracket for slim chassis. Drive power comes from your power supply's SATA power connectors.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- [Efficient] - You could add four 6Gbps/s SATA 3.0 devices to your computer with the PCIe SATA card and 4 SATA cables. Backward compatible to 1.5 Gbps/s and 3 Gbps/s
- [High Performance] - The 4 port SATA controller based on Marvell 88SE9215 chip, more stable and wider compatible. Port Multiplier FIS-based and Command-based switching supported
- [Support System] - The SATA expansion card supports Windows XP/ 7/ 8/ 10/ Mac/ NAS/ Linux OS, no driver required. Support install Windows OS from Win10 PE
- [For All PCs] - Our PCIe to SATA III 4 port expansion card comes with a low profile bracket and 4 SATA cables, compatible with most chassis on the market. Fit for PCIe X1/ X4/ X8/ X16 slot
- [Please Note] - You could make the system to boot from this SATA card but non RAID. BUT If your motherboard has RAID function, you could make a RAID with this SATA card
Full Specifications
| Brand | JESOT |
|---|---|
| Style | Classic |
| Style Name | Classic |
| Model Number | SATA CARD-01 |
| Compatibility | Mac, Linux |
| Mfr Part Number | SATA CARD-01 |
| Number of Items | 4 |
| Number of Packs | 1 |
| Compatible Devices | Personal Computer |
| Hardware Interface | PCI |
| Item Dimensions L x W x H | 4.72"L x 3.1"W x 0.8"H |
Ready to buy?
SATA 4 Port Card with 4 Cables - SATA 3.0 6 Gbps PCIe Controller is vintage hardware; the used and vintage market on eBay carries most of the live inventory. Prices and condition vary by seller and move in real time, so we link the live listing rather than quote a cached price. It also has an Amazon listing — check it for current price and availability. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Expansion Cards
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Open-Source Linux Driver Lands for the ASUS ZenVision Lid OLED
- Hailo-8 vs Hailo-8L vs Coral TPU: Which AI Accelerator Wins on Raspberry Pi 5?
- DualSense vs 8BitDo Pro 2: Best PC Controller in 2026
- Grok 4.5 Ranks #4 on GDPval: Cloud-vs-Local Math for 2026
- RTX 3060 12GB vs 8GB in 2026: Which VRAM Tier Still Holds Up at 1080p
- Best Budget Gaming PC Parts Under $700 in 2026
- IPEX-LLM + Ollama vs a CUDA RTX 3060 Rig
- Ryzen 9800X3D Idle Temp: What's Normal (2026 Guide)
- Best Gaming SSD in 2026: 5 Picks for PS5, Steam Deck, and Custom Builds
- Inside the Intel 8087: Decapping a 1980 Math Coprocessor's Microcode
- Second Streaming PC vs NVENC: What an Old i7-9700K Is Still Good For
- Forza Horizon 6 Boots in 4 Seconds with Advanced Shader Delivery
- Windows 98 SE on >512MB RAM: The vcache Fix Explained (2026)
- LattePanda Sigma vs Raspberry Pi 4 8GB: x86 Windows SBC vs ARM Linux for Edge AI Workloads in 2026
- Gaming PC Build 2026: The Reddit-Consensus Parts List
- Steam Deck: Linux's Trojan Horse for PC Gamers
- Build a RetroPie Handheld in 2026: A Complete Step-by-Step Guide
- Intel's Bartlett Lake Core 9 273PQE Reportedly Loses to a Four-Year-Old CPU
- Claude Fable 5 Launches at #1 on the Intelligence Index — What Local Builders Should Take Away
- Best Budget SATA SSD for Gaming in 2026
- Ryzen 7 5800X vs Intel Core i7-9700K for 1080p Gaming in 2026: Which Budget Chip Wins?
- Best Streaming Kit for New Creators in 2026
- ComfyUI on a 12GB RTX 3060: Install + Stable Diffusion Throughput 2026
- Best Sim Racing Wheels for PC and Console in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090