Skip to main content
chenyang IDE to SATA Adapter,3.5" IDE/PATA 40Pin Hard Disk Drive to SATA Motherboard Adapter Converter
chenyang

chenyang IDE to SATA Adapter,3.5" IDE/PATA 40Pin Hard Disk Drive to SATA Motherboard Adapter Converter

Bottom line: The chenyang IDE to SATA Adapter: Supports IDE 66/100/133MB/s modes, covering most legacy PATA controllers; main trade-off: capped at 1000GB, so larger modern SATA drives are out of scope.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Check price on Amazon → Compare to similar storage adapters

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ Supports IDE 66/100/133MB/s modes, covering most legacy PATA controllers
  • ✓ No auxiliary power supply needed, one less cable in a cramped retro case
  • ✓ Plug and play with no driver install required
  • ✓ Works with DOS and Windows 98/98SE through Windows 7, plus Linux
  • ✓ 9.99 dollar fix that avoids replacing a whole vintage motherboard

Cons

  • ✗ Capped at 1000GB, so larger modern SATA drives are out of scope
  • ✗ Not hot swappable, system must be fully powered down to connect
  • ✗ Sized for 3.5-inch desktop drives, not 2.5-inch or laptop IDE setups
  • ✗ Bare PCBA with no enclosure or mounting bracket included

Manufacturer description

The chenyang IDE to SATA Adapter solves a specific retro PC problem: your motherboard has a 40-pin IDE/PATA header, but the only drives you can still buy are SATA. This PCBA converter bridges that gap, letting a modern 3.5-inch SATA HDD or SSD attach to the IDE channel on a legacy desktop board. It supports IDE 66/100/133MB/s transfer modes and works with drives up to 1000GB, which covers the addressing limits most vintage chipsets can actually reach. Installation is plug and play with no driver disc and no auxiliary power cable to route, since the adapter draws what it needs from the…

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored chenyang IDE to SATA Adapter using a rating × review-volume × price-fit model applied to published specs and reviews across the storage adapters category. chenyang's storage adapters lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for storage adapters of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will this let me put a SATA SSD in my old Windows 98 PC?

Yes. The adapter connects a 3.5-inch SATA HDD or SSD to a 40-pin IDE/PATA motherboard header, and the listed compatibility includes DOS and Windows 98/98SE along with Me, 2000, 2003, XP, Vista, Windows 7, and Linux.

What is the largest drive this adapter supports?

The manufacturer lists support for IDE 40-pin drives up to 1000GB. Larger SATA drives may not be addressed correctly, and your motherboard BIOS may impose a lower limit of its own.

Do I need a separate power cable for the adapter?

No. The listing states no extra power supply is required, so you only run the drive's own power and the IDE connection. That matters in tight desktop cases where spare Molex leads are already spoken for.

Can I swap the drive while the computer is running?

No. The unit is explicitly not hot swappable. Shut down and cut power before attaching or removing the adapter or the drive, or you risk damaging the board.

Key Features

  • for Desktop & 3.5" Hard Disk Drive , Works with all IDE 40Pin Drives up to 1000GB
  • Supports IDE 66/100/133MB/s . Adapter is good for up grading an old computer with 3.5 inch IDE HDD to a new 3.5 inch SATA HDD or SSD.
  • No need for an extra power supply.
  • No driver needed, plug and play, unit is not hot swappable. Compatible with DOS, Windows 98/98SE, Me, 2000, 2003, XP, Vista, Windows 7 & Linux.
  • 3.5 inch IDE/PATA 40Pin HDD Drive to SATA Female Converter Adapter PCBA

Full Specifications

Brandchenyang
Color3.5" IDE to SATA
Unit Count1 Count
Model NumberCY-EP-046
CompatibilityLinux
Connector TypeIDE-SATA
Item Dimensions4.33 x 4.33 x 4.33 inches
Mfr Part NumberEP-096
Number of Items1
Number of Ports2
Power Plug TypeNo Plug
Compatible DevicesLaptop
Item dimensions L x W x H4.33 x 4.33 x 4.33 inches
Specific Uses For ProductPC

Ready to buy?

chenyang IDE to SATA Adapter,3.5" IDE/PATA 40Pin Hard Disk Drive to SATA Motherboard Adapter Converter is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Storage Adapters

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
chenyang IDE to SATA Adapter,3.5" IDE/PATA 40Pin Hard Disk Drive to SATA Motherboard Adapter Converter
View on Amazon →