WINSINN
WINSINN 30mm RGB Fan 12V
Bottom line: The WINSINN 30mm RGB Fan 12V ($8.99 on Amazon as of 2026-10-07): Quiet 21dBA operation at just 0.72W and 0.06A draw; main trade-off: low 3.72 CFM airflow suits only small, narrow spaces.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Quiet 21dBA operation at just 0.72W and 0.06A draw
- ✓ Value 4-pack ideal for multi-fan 3D printer or DIY builds
- ✓ Hydraulic bearing rated for a 35,000-hour lifespan
- ✓ Backed by a 2-year WINSINN warranty
- ✓ Compact 30x30x10mm size fits hotends, routers, Pi and VR gear
Cons
- ✗ Low 3.72 CFM airflow suits only small, narrow spaces
- ✗ 2-pin connector means no PWM speed control
- ✗ RGB lighting is fixed, not addressable or software-tunable
- ✗ 12V-only, so no 5V or 24V system compatibility
SpecPicks Verdict
SpecPicks scored WINSINN 30mm RGB Fan 12V using a rating × review-volume × price-fit model applied to published specs and reviews across the cooling & fans category. WINSINN's cooling & fans lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for cooling & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- ✔️WINSINN 30mm RGB fan which micro size and lightweight design, fast and stable cooling, colorful when it works, bringing you unparalleled experience. So many 3D Printer and DIY enthusiasts are full of praise for it, and it will also be your best choice. The working voltage is 12V, which perfectly compatible a various 3D printer extruder / hotend / nozzle or any DIY cooling and narrow place.
- ✔️High quality Hydraulic Bearings, 2-years Warranty. Balance price and performance, suitable for daily use, life: 35,000 Hours.
- ✔️Rated Voltage: DC 12V, Current: 0.06A, Power: 0.72W, Air Pressure: 4.75mmH₂O, Airflow: 3.72CFM, Noise: 21dBA
- ✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pie / TV box / VR glasses and any small electronic equipment cooling ventilation.
- ✔️Packing List: 4 x 30mm RGB Fan 12v, Connector & Line length: XH2.54 – 11.8in(300mm), Size: 30mm x 30mm x 10mm
Full Specifications
| Brand | WINSINN |
|---|---|
| Model | RGBFAN301012VH |
| Voltage | 12 volts |
| Material | Plastic |
| Noise Level | 19.5 db |
| Part Number | 3010 LED Fan |
| Compatibility | PC |
| Material Type | Plastic |
| Cooling Method | Air |
| Number of Items | 4 |
| Air Flow Capacity | 3.72 cfm |
| ✔️Widely Used | Suitable for ventilation of Small PC Case / Router / Raspberry pie / TV box / VR glasses and any small electronic equipment cooling ventilation. |
| Compatible Devices | Printer |
| ✔️Packing List | 4 x 30mm RGB Fan 12v, Connector & Line length: XH2.54 – 11.8in(300mm), Size: 30mm x 30mm x 10mm |
| ✔️Rated Voltage | DC 12V, Current: 0.06A, Power: 0.72W, Air Pressure: 4.75mmH₂O, Airflow: 3.72CFM, Noise: 21dBA |
| Power Connector Type | 2-Pin |
| Maximum Rotational Speed | 6800 rpm |
| Item Dimensions L x W x H | 1.18"L x 0.39"W x 1.18"H |
| Full listing title | WINSINN 30mm RGB Fan 12V, LED Colorful 3D Printer Micro 12 Volt Fans 3010 Hydraulic Bearing, Brushless Cooling 30mmx10mm 2PIN (Pack of 4Pcs) |
Ready to buy?
WINSINN 30mm RGB Fan 12V, LED Colorful 3D Printer Micro 12 Volt Fans 3010 Hydraulic Bearing, Brushless Cooling 30mmx10mm 2PIN (Pack of 4Pcs) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Related Cooling & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- RTX 5070 vs 5080: Which GPU Fits Your Build?
- Raspberry Pi 5 8GB Review (2026): Still the SBC to Beat
- Ryzen 7 5700X vs Intel Core i7-9700K: Best Budget Streaming + Gaming CPU in 2026
- Claude Fable 5 Beats GPT-5.5 by 13 Points: The Local-LLM Reality Check
- Pentium III Tualatin Overclocking and Slotket Build Guide: The Forgotten King of Socket 370
- USB Wi-Fi 6 vs PCIe Wi-Fi 6E: Which Actually Fixes Gaming Lag?
- Best Storage Upgrades for Retro and Budget PC Builds in 2026
- How to run Llama 3.1 8B on Apple M4 Max
- Anthropic's 2GW AMD Deal: What It Means for Local-vs-Cloud Builders
- Intel Kills BigDL: The Best Local-LLM Stack to Switch To in 2026
- Best GPU for DeepSeek-R1 32B (2026)
- Athlon 64 + Radeon 9800 Pro Windows XP Build (2026 Revival): CompactFlash-to-IDE Boot Guide
- How to Backup a NAS on a Budget in 2026
- Best NVMe SSD for Local AI Model Storage in 2026
- Build a 3D-Printed Cyberdeck Music Workstation on a Raspberry Pi 4
- First-Time Steam Deck Emulation Setup: A Complete Guide
- Voodoo3 3000 PCI Install Guide for Win98 SE in 2026
- Best Sim Racing Wheel Under $300 in 2026: Force Feedback That's Worth It
- Claude Code Cut 80% of Its System Prompt: What Changes for Local Agent Rigs
- Open Source AI Code Reviewers You Can Self-Host in 2025
- Best Steam Deck Dock and 4K Monitor Setup for TV-Mode Gaming in 2026
- Best Gaming GPUs for 1080p High-Refresh Rate (2026)
- RetroPie Handheld 3D Print Guide: Cases, Settings & Parts
- Claude Mythos: What Anthropic Found + Why Regulators Were Briefed
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090