WINSINN
WINSINN DC 50mm Fan 12V 5010 Dual Ball Bearing Brushless Cooling Turbine Turbo 50mmx10mm 2PIN (Pack of 2Pcs)
Bottom line: The WINSINN DC 50mm Fan 12V 5010 Dual Ball Bearing Brushless Cooling is a specs-and-price decision rather than a crowd-consensus one in the cooling & fans category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Backed by WINSINN's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
✔️WINSINN 5010 fan 5V which small size and lightweight design, suitable for 3D printer / PC CPU server or any DIY cooling and narrow place.✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours.✔️Rated Voltage: DC 12V, Current: 0.11A, Power: 1.32W, Speed: 5000PRM, Air Pressure: 3.4mmH₂O, Airflow: 9.95CFM, Noise: 28.5dBA✔️Widely Used: Designed to provide high air volume for small areas which requires cooling or ventilation. Suitable for 3D printer, DVD player, small communication…
SpecPicks Verdict
SpecPicks scored WINSINN DC 50mm Fan 12V 5010 Dual Ball Bearing Brushless Cooling… using a rating × review-volume × price-fit model applied to published specs and reviews across the cooling & fans category. WINSINN's cooling & fans lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for cooling & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- ✔️WINSINN 5010 fan 12V which small size and lightweight design, suitable for 3D printer / PC CPU server or any DIY cooling and narrow place.
- ✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours.
- ✔️Rated Voltage: DC 12V, Current: 0.11A, Power: 1.32W, Speed: 5000PRM, Air Pressure: 3.4mmH₂O, Airflow: 9.95CFM, Noise: 28.5dBA
- ✔️Widely Used: Designed to provide high air volume for small areas which requires cooling or ventilation. Suitable for 3D printer, DVD player, small communication devices, PC CPU server, DVRs, Switches, network storage devices and can be used as a replacement fan for any electronic products.
- ✔️Packing List: 2 x 50mm Fan 5v - Dual Ball Bearing, Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 50mm x 50mm x 10mm
Full Specifications
| Brand | WINSINN |
|---|---|
| Model | 2PFAN501012D |
| Turbo | Yes |
| Voltage | 12 volts |
| Wattage | 1.32 watts |
| Material | Plastic |
| Unit Count | 2 Count |
| Noise Level | 28.5 db |
| Part Number | DB501012F2P |
| Compatibility | PC |
| Material Type | Plastic |
| Cooling Method | Air |
| Number of Items | 2 |
| Air Flow Capacity | 9.95 cfm |
| Compatible Devices | Printer, Server |
| ✔️Packing List | 2 x 50mm Fan 5v - Dual Ball Bearing, Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 50mm x 50mm x 10mm |
| ✔️Rated Voltage | DC 12V, Current: 0.11A, Power: 1.32W, Speed: 5000PRM, Air Pressure: 3.4mmH₂O, Airflow: 9.95CFM, Noise: 28.5dBA |
| Power Connector Type | 5v |
| Maximum Rotational Speed | 5000 rpm |
| Item Dimensions L x W x H | 1.97"L x 0.39"W x 1.97"H |
Ready to buy?
WINSINN DC 50mm Fan 12V 5010 Dual Ball Bearing Brushless Cooling Turbine Turbo 50mmx10mm 2PIN (Pack of 2Pcs) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Cooling & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- Best Raspberry Pi Starter Kits for Beginners (2026)
- Arc A770 vs B580 for Local LLM Inference: 2025 Comparison
- 3dfx Voodoo2 SLI in 2026: Build Guide, Glide Setup, CF Storage
- Intel Arc Pro B60 vs RTX 3060 12GB for Local LLMs
- How to run DeepSeek-R1 32B on Apple M3 Ultra
- Qwen MTP on LLaMA.cpp + TurboQuant: What's Actually Verified
- Is an RTX 3060 Enough for 4K Gaming? Pairing It With a Budget 4K Monitor
- Raspberry Pi 4 8GB in 2026: Still the Best Home-Lab SBC for Under $80
- Best Gaming Mouse for FPS Esports Under $100 (2026)
- Raspberry Pi 5 16GB Ships — Is the Pi 4 8GB Still Worth It?
- Best Gaming Controller for PC and Console in 2026: 5 Picks Compared
- Best SATA SSD for Boot Drive Upgrades on Aging Desktops (2026)
- Open WebUI on a Raspberry Pi 4: A Self-Hosted LLM Front-End That Sips Power
- Build a 3D-Printed Cyberdeck Music Workstation on a Raspberry Pi 4
- Best Gaming Mouse Pad for Esports and Productivity (2026)
- Aider vs Cline vs Continue.dev for Local-LLM Coding on a 12GB GPU
- Best 1440p Monitor for the RTX 3060 12GB (2026)
- Aider vs Cline vs Cursor for Local Coding on a 12GB GPU (2026)
- Best Parts for a DIY Home Arcade Cabinet in 2026
- Glide vs OpenGL vs Direct3D: The API War That DirectX 9 Ended
- When Gemini Debugs Your Linux Boot: Agentic Sysadmin on a Local RTX 3060 Rig
- Vision LLMs Driving Period-Correct WinXP and Win98 Installers: Field Report from a 4-PC Retro Fleet
- CUDA 13.3 and the RTX 3060: What Changes for Local LLM Inference
- Ryzen 7 5800X3D vs Core i7-14700K: DDR4's Last Big Fight
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090