uxcell M2x4mm+3mm Male-Female Brass Hex PCB Motherboard Spacer Standoff
Bottom line: The uxcell M2x4mm+3mm Male-Female Brass Hex PCB Motherboard Spacer is a specs-and-price decision rather than a crowd-consensus one in the tools & maintenance category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ √ Material: Made of brass material, corrosion and rust resistance, durable and easy to use
- ✓ Backed by uxcell's warranty and support channels
Cons
- ✗ Check battery runtime and RPM/CFM specs match your case size and cleaning frequency
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks scored uxcell M2x4mm+3mm Male-Female Brass Hex PCB Motherboard Spacer… using a rating × review-volume × price-fit model applied to published specs and reviews across the tools & maintenance category. uxcell's tools & maintenance lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- √ Size: M2x4mm+3mm Male-Female Hex Brass PCB Motherboard Spacer Standoff for FPV Drone Quadcopter, Computer & Circuit Board
- √ Material: Made of brass material, corrosion and rust resistance, durable and easy to use
- √ Applications: Great for the industries of communication, office equipment, electronics, etc
- √ Easy to install: These standoffs are useful small tools, very easy to install, and bring a lot of convenience to your DIY projects
- √ Package includes: 50pcs M2x4mm+3mm male-female brass spacers
Full Specifications
| Size | M2x4mm+3mm |
|---|---|
| Brand | uxcell |
| Shape | Hex |
| Material | Brass |
| √ Size | M2x4mm+3mm Male-Female Hex Brass PCB Motherboard Spacer Standoff for FPV Drone Quadcopter, Computer & Circuit Board |
| Part Number | a19111200ux0395 |
| √ Material | Made of brass material, corrosion and rust resistance, durable and easy to use |
| √ Applications | Great for the industries of communication, office equipment, electronics, etc |
| Batteries Required? | No |
| √ Easy to install | These standoffs are useful small tools, very easy to install, and bring a lot of convenience to your DIY projects |
| √ Package includes | 50pcs M2x4mm+3mm male-female brass spacers |
| Item Package Quantity | 50 |
| Full listing title | uxcell M2x4mm+3mm Male-Female Brass Hex PCB Motherboard Spacer Standoff for FPV Drone Quadcopter, Computer & Circuit Board 50pcs |
Ready to buy?
uxcell M2x4mm+3mm Male-Female Brass Hex PCB Motherboard Spacer Standoff for FPV Drone Quadcopter, Computer & Circuit Board 50pcs is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Intel Kills BigDL: The Local-LLM Path Forward in 2026
- $2,000 Gaming PC Build 2026: Parts, Cost, 1440p FPS
- Adding Modern Audio to a Retro PC: Sound BlasterX G6 on XP
- Best Steam Deck Docked Setup for a 4K Desk in 2026: Dock, Monitor, Storage
- Offline Suitcase Robot: Jetson Orin NX SUPER + Gemma 4 E4B
- Best SSD and Controller Pairing for a Living-Room Gaming PC
- Local LLM PC Build 2026: What 12GB of VRAM Really Runs
- i7-9700K vs Ryzen 7 5800X as a CPU-Offload Host for a 12GB GPU
- GeForce 6800 Ultra AGP Install Guide: Drivers, Benchmarks, and the Last Great AGP Card
- RTX 3060 vs RTX 5060 Ti — two generations apart
- Best Streaming Gear for Twitch Beginners in 2026
- RTX 5090 vs RTX 6000: Specs, Gaming, AI Compared
- Jetson Orin Nano Super vs Coral USB: Which One Runs an LLM?
- RTX 3060 12GB vs Ryzen 5 5600G iGPU: Do You Need a GPU for 1080p Esports?
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090
- KOORUI 4K QD-Mini LED vs Samsung Odyssey 4K: Best Budget 4K Gaming Monitor in 2026?
- Tencent Hy3 on an RTX 3060 12GB: Can a $300 GPU Run It?
- Running a 1-Trillion-Parameter LLM on 768GB of Cheap Optane
- Best NVMe Boot SSD for an AM4 Ryzen Build: 970 EVO Plus vs the Budget Field
- Qwen3.6-27B vs Coder-Next: Local Code Accuracy and VRAM on AMD Rigs
- Is the RTX 3060 12GB Still Worth It for 1080p and 1440p Gaming in 2026?
- Best Budget SATA SSD for a Steam Library in 2026: BX500 vs 870 EVO vs SN550
- Ryzen 7 5800X + RTX 3060 12GB: Best 1440p AM4 Build
- Nemotron 3 Ultra vs MiniMax M3: Best Open Model for a 12GB Rig
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090