Skip to main content
InnoGear Webcam Stand Gooseneck Camera Arm Stands Desk Mount Phone Holder | for Logitech Webcam BRIO 4K C960 C920 C920S C922 C922x C925e C930 C930e C615 NexiGo N60, Quick Setup, Eye Level Positioning
InnoGear

InnoGear Webcam Stand Gooseneck Camera Arm Stands Desk Mount Phone Holder

Bottom line: The InnoGear Webcam Stand Gooseneck Camera Arm Stands Desk Mount Phone: 25 in (63 cm) gooseneck lifts your webcam to eye level from the desk edge; main trade-off: 1.0 lb max load rules out DSLRs and heavier mirrorless setups.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Check price on Amazon → Compare to similar streaming gear

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ 25 in (63 cm) gooseneck lifts your webcam to eye level from the desk edge
  • ✓ 360-degree swivel ball head with a locking knob for exact angles
  • ✓ 1/4 in screw mount fits BRIO 4K, C920, C922, C930e and NexiGo N60
  • ✓ Spring-loaded phone holder opens to 4.0 in wide
  • ✓ Anti-scratch sponge pad on the clamp protects your desk surface

Cons

  • ✗ 1.0 lb max load rules out DSLRs and heavier mirrorless setups
  • ✗ Clamp opens only 1.8 in (4.6 cm); thicker desktops won't fit
  • ✗ Not compatible with Logitech C270 or C310 webcams
  • ✗ Phone holder tops out at 4.0 in wide, too narrow for tablets

Manufacturer description

The InnoGear Webcam Stand puts your camera at eye level. It's a 25 in (63 cm) gooseneck arm, measured including the ball head, that clamps to your desk edge. You get a straight-on shot for calls, streams and remote teaching instead of looking up from a monitor bezel. The stand mounts any device with a standard 1/4 in screw hole. That covers the Logitech BRIO 4K, C920, C920S, C922, C922x, C925e, C930, C930e, C960 and C615, plus the NexiGo N60. The Logitech C270 and C310 are not supported. A 360-degree swivel ball head locks with a knob, so you can set tilt and rotation separately from the…

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored InnoGear Webcam Stand Gooseneck Camera Arm Stands Desk Mount Phone… using a rating × review-volume × price-fit model applied to published specs and reviews across the streaming gear category. InnoGear's streaming gear lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for streaming gear of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will this stand work with my Logitech C920 or BRIO 4K?

Yes. The stand is listed as compatible with the Logitech BRIO 4K, C960, C920, C920S, C922, C922x, C925e, C930, C930e and C615, plus the NexiGo N60. It works with any device that has a standard 1/4 in screw hole. The Logitech C270 and C310 are not supported.

How thick a desk can the clamp attach to?

The desk clamp opens to a maximum of 1.8 in (4.6 cm). Measure your desktop's edge thickness before you buy. The clamp has an anti-scratch sponge pad to protect the surface.

How long is the gooseneck arm?

The gooseneck is 25 in (63 cm) long, including the ball head. You can bend it to put your webcam or phone at eye level or at a high or low angle.

Can I use it to hold my phone?

Yes. The included spring-loaded phone holder opens up to 4.0 in wide, which fits most smartphones. It can hold the phone horizontally or vertically for livestreams, video chat or overhead recording.

How much weight can the stand hold?

The maximum load is 1.0 lb. That covers webcams and smartphones, but it is not designed for DSLRs or heavier mirrorless cameras. For warranty coverage, check the current product listing.

Key Features

  • Universal Compatibility: InnoGear quality-made gooseneck stand is compatible with most webcams and almost all mobile phones. It is suitable for logitech webcam BRIO 4K C960 C920 C920S C922 C922x C925e C930 C930e C615, NexiGo N60, etc (expect for Logitech Webcam C270 C310), and other devices with the standard 1/4" screw hole.
  • Unique Design: The total length of the gooseneck is 25 in/63cm (including the length of the ball head) and the max load of the stand is 1.0 lb. The upgraded desk mounting clamp is built with anti-scratch sponge pad to protect the table and the max extent of it is 1.8 in/4.6 cm to fit most desks.
  • Adjustable and Flexible: This gooseneck stand is flexible to adjust the position of your webcam. It can be positioned at whatever angle you need it at. Meanwhile, it is of high quality and sturdy enough to support your webcams or phones.
  • Swivel Ball Head: By adjusting the knob, the premium ball head can 360° rotate, providing the capability to set up your webcam and mobile phone at any angle. You will like the range of ball head's motion during the use of it.
  • Nice Phone Holder: The phone holder is spring-loaded and can extend up to 4.0" wide, fit for almost all smartphones. You can easily adjust the phone holder to find one angle you desire (horizontal, vertical, high-angle, low-angle and more). It can be used for many purposes like livestreams, video chat, distance teaching, etc.

Full Specifications

BrandInnoGear
ColorB Black
Shapeirregular shape" or "composite shape
Weight1.0 lb
Arm Length25 inches
Model NameWS089
Unit Count1 Count
Model NumberWS089
Mounting TypeDesk Mount Stand
Mfr Part NumberWS089
Compatible DevicesCameras, Smartphones, Webcams
Enclosure MaterialAlloy Steel
Additional FeaturesAdjustable Webcam Stand
Included ComponentsPhone holder
Warranty Description12 months
Water Resistance LevelNot Water Resistant
Compatible Phone ModelsMost Phones
Weight Capacity Maximum16 ounces
Full listing titleInnoGear Webcam Stand Gooseneck Camera Arm Stands Desk Mount Phone Holder | for Logitech Webcam BRIO 4K C960 C920 C920S C922 C922x C925e C930 C930e C615 NexiGo N60, Quick Setup, Eye Level Positioning

Ready to buy?

InnoGear Webcam Stand Gooseneck Camera Arm Stands Desk Mount Phone Holder | for Logitech Webcam BRIO 4K C960 C920 C920S C922 C922x C925e C930 C930e C615 NexiGo N60, Quick Setup, Eye Level Positioning is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Streaming Gear

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
InnoGear Webcam Stand Gooseneck Camera Arm Stands Desk Mount Phone Holder | for Logitech Webcam BRIO 4K C960 C920 C920S C922 C922x C925e C930 C930e C615 NexiGo N60, Quick Setup, Eye Level Positioning
View on Amazon →