EZDIY-FAB GPU VGA PCIe 6 Pin U Turn 180 Degree Angle Connector Power Adapter Board
Bottom line: The EZDIY-FAB GPU VGA PCIe 6 Pin U Turn 180 Degree Angle Connector Power: 180-degree U-turn design routes 6-pin PCIe cables without bending the GPU connector; main trade-off: 6-pin only - no 8-pin, 6+2, or 12VHPWR support.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 180-degree U-turn design routes 6-pin PCIe cables without bending the GPU connector
- ✓ Two-pack ships both up-angled and down-angled orientations for either card position
- ✓ Turns a vertical PSU cable run horizontal to clear height-limited chassis
- ✓ Standard PCIe 6-pin pinout fits ASUS, EVGA, Gigabyte, Sapphire, ASRock and NVIDIA cards
Cons
- ✗ 6-pin only - no 8-pin, 6+2, or 12VHPWR support
- ✗ Adds a rigid block behind the card that needs side-panel clearance
- ✗ Only two adapters, so triple-connector cards need a second pack
- ✗ EZDIY-FAB lists no current draw rating, so high-wattage cards are a gamble
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for EZDIY-FAB GPU VGA PCIe 6 Pin U Turn 180 Degree Angle Connector Power…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro video adapters & switches category before committing. On the listing's own facts, the case for it is "180-degree U-turn design routes 6-pin PCIe cables without bending the GPU connector"; the main trade-off is "6-pin only - no 8-pin, 6+2, or 12VHPWR support". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, confirm the board side: this card needs a free PCIe slot of the width the card uses. Your motherboard manual lists which slots share lanes with M.2 sockets or other slots. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Designed for changingPCIE 6PIN cable installation direction.
- Package included 2 directrions of connector interface adapters.(up angled+down angled)
- 180 Degrees U turn design, connecting between PSU Cable and GPU connector, does not cause pressure on the GPU connector for long-term stable use
- Can install the 6pin PSU PCIE cable from vertical to horizontal direction with this adapter to fit in height limited chassis
- These adapters are standard PCIe connectors, so it will work with all graphics cards such as: ASUS, ASRock, EVGA ,Gigabyte, Radeon, Sapphire, NVIDIA, etc.;
Full Specifications
| Brand | EZDIY-FAB |
|---|---|
| Color | black |
| Finish | Vga |
| Unit Count | 2 Count |
| Finish Type | Vga |
| Model Number | UK2-STD/RVS 6Pin Adapter |
| Warranty Type | Limited |
| Connector Type | VGA |
| Mfr Part Number | EZDPI161-3 |
| Number of Items | 2 |
| Number of Ports | 2 |
| Power Plug Type | No Plug |
| Compatible Devices | pc |
| Full listing title | EZDIY-FAB GPU VGA PCIe 6 Pin U Turn 180 Degree Angle Connector Power Adapter Board for Desktop Graphics Card-Standard+Reverse Type 2-Pack |
Ready to buy?
EZDIY-FAB GPU VGA PCIe 6 Pin U Turn 180 Degree Angle Connector Power Adapter Board for Desktop Graphics Card-Standard+Reverse Type 2-Pack is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro Video Adapters & Switches
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- Intel Arc A770 LLM Performance: Local Inference Guide
- Ryzen 7 5700X vs 5800X for 1080p & 1440p Gaming in 2026
- SATA vs NVMe for a Ryzen 5800X Gaming Build: Does It Matter?
- Alienware Area-51 RTX 5090 Gets $2,580 Off — Worth It?
- Intel Arc B580 for LLM Inference: What It Can Actually Do
- Best Controllers for Retro Gaming and Emulation in 2026
- Active Quake 3 and OpenArena Servers in 2026 — How to Find and Join Them
- AMD Ryzen 9 9950X3D2 Runs Faster on Linux Than Windows 11
- Crucial BX500 vs Samsung 870 EVO: Best SATA SSD for Game Loads
- Raspberry Pi Projects on GitHub: 2025 Guide
- Intel llm-scaler-vLLM 1.4 with Arc Pro B70: Local Inference vs RTX 3060 12GB
- Best Sim Racing Wheel for PC and Console in 2026
- MSI RTX 3060 Ventus vs ZOTAC RTX 3060 Twin Edge: Which 12GB Card to Buy
- How to run Llama 3.1 8B on Arc B580
- Samsung 27" 1440p 240Hz Gaming Monitor Drops to $169 in 2026 Deal
- Imaging Vintage IDE & SATA Drives in 2026: USB Adapters
- GameSir G7 SE vs 8BitDo Pro 2 vs DualSense for PC
- Raspberry Pi OS Moves to the Linux 6.18 LTS Kernel With an Updated LabWC Compositor
- Why Cheap Monitors Use HDMI Instead of DisplayPort
- How to run Qwen 3 14B on Apple M4 Max
- Can a 12GB RTX 3060 Run a 70B LLM? The Offload Reality Check
- Gemma 4 12B Fits Multimodal AI Into 16GB of RAM
- Best CPU Cooler for Ryzen 9 3900X Overclocking in 2026
- Razer Soma Chroma Gaming Chair Review: RGB vs. Adjustability
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090