Skip to main content
BTF-LIGHTING FCOB COB LED Strip Warm White 2700K, UL Listed 16.4FT DC12V Super Bright Uniform Light, CRI 90+ 8mm Width Flexible Tape Light for Home Indoor DIY Lighting(No Adapter or Controller)
BTF-LIGHTING

BTF-LIGHTING FCOB COB LED Strip Warm White 2700K

Bottom line: The BTF-LIGHTING FCOB COB LED Strip Warm White 2700K: 336 LEDs/m FCOB design gives a dot-free, continuous line of light; main trade-off: no power supply or controller included; 12V adapter is a separate purchase.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ 336 LEDs/m FCOB design gives a dot-free, continuous line of light
  • ✓ CRI 90+ at 2700K for accurate warm white under cabinets and shelves
  • ✓ UL Listed with double-layer copper PCB for conductivity and heat dissipation
  • ✓ Cuttable at solder points; male/female 5.5x2.1mm DC plugs link runs in series
  • ✓ Maker lists support for Tuya, Zigbee 3.0, BanlanX and WLED ESP32 controllers

Cons

  • ✗ No power supply or controller included; 12V adapter is a separate purchase
  • ✗ Single-color 2700K only; no tunable white or RGB on this strip
  • ✗ Mid-run cuts need soldering or separate connectors to rejoin
  • ✗ No waterproof rating listed; marketed for indoor use only

Manufacturer description

The BTF-LIGHTING FCOB COB LED strip packs 336 LEDs per meter onto an 8mm-wide flexible tape. The result is a continuous line of 2700K warm white light, without the visible hot spots of traditional 5050 or 3528 SMD strips. The 16.4ft reel runs on DC12V, is rated CRI 90+ for accurate color rendering, and is UL Listed. A double-layer copper PCB handles conductivity and heat dissipation. The 3M adhesive backing lets you mount the strip under cabinets, behind mirrors, along stairs, or as a desk and monitor backlight. You can cut it at the marked solder points. Each end has a 5.5x2.1mm DC plug…

SpecPicks Verdict

SpecPicks scored BTF-LIGHTING FCOB COB LED Strip Warm White 2700K using a rating × review-volume × price-fit model applied to published specs and reviews across the rgb & lighting category. BTF-LIGHTING's rgb & lighting lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for rgb & lighting of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Does the BTF-LIGHTING COB LED strip come with a power supply?

No. The package includes only one 16.4ft COB LED strip, with no power supply or controller. You need a DC12V adapter with a 5.5x2.1mm plug. Check the product listing for the wattage needed to size the adapter correctly.

Can I cut this LED strip to fit my cabinets?

Yes. You can cut the strip at the marked solder points. It has a 5.5x2.1mm DC plug on each end, one male and one female, so full-length strips can be linked end to end in series.

Will it work with smart home controllers like Tuya or Zigbee?

BTF-LIGHTING lists compatibility with Tuya Wi-Fi, Bluetooth and Zigbee 3.0 controllers (WB5, C01W, C01Z, LM053), BanlanX (SP530E, SP630E) and WLED ESP32 (SP803E, SP805E). It also lists support for ELV, TRIAC, DMX, Dali, 0-10V and RF dimmers. Confirm that any controller you buy supports 12V single-color strips.

How is an FCOB strip different from a regular 5050 LED strip?

This FCOB strip uses 336 densely packed LEDs per meter under a continuous phosphor layer. Traditional 5050 and 3528 SMD strips have spaced-out chips that show dots. The FCOB design gives a softer, more uniform line of light, which matters most when the strip is visible or reflected.

Key Features

  • 【Ultra Bright and Uniform】DC12V 336LEDs/m 16.4FT Warm White 2700K. Flip Chip On Board LED strip(FCOB).Adopting high brightness LED as the light source to ensure the brightness while maintaining color consistency.Compared with traditional 5050SMD 3528SMD light strips, FCOB light strips dense light-emitting units create a brighter, softer, spotless and more uniform light.
  • 【UL Listed for safety assurance】BTF-LIGHTING LED strips carry the internationally recognized UL certification. Engineered with premium double-layer copper PCB for superior conductivity and heat dissipation. Additionally, the LED strip features strong 3M adhesive backing for peel-and-stick installation - no tools or wiring skills required!
  • 【Universal Compatiblity】Our FCOB LED strip is compatible with most dimmers using standard control protocols including ELV, TRIAC, DMX, Dali, 0-10V, RF. For example, compatible with Tuya Wi-Fi, Bluetooth, Zigbee 3.0(WB5,C01W,C01Z,LM053); BanlanX APP(SP530E, SP630E); WLED ESP32(SP803E SP805E) LED controller.
  • 【Cuttable and Linkable】Our FCOB light strip is soft and flexible.The Spots to solder can be cut.Two 5.5mmx2.1mm DC Plugs on two ends, one is female the other one is male.It also support end to end connect in series.8mm width.
  • 【Wide Application】Our FCOB LED light is perfect for various interior decoration.Such as living room, hallway, bedroom, kitchen, accent lighting, cabinet lighting, stair, mirror, corridor, DIY backlight, DIY lighting, special use and other commercial and residential lighting projects.Come with a strong self adhesive backing.Tips:Before installation, please thoroughly clean and dry the installation surface.
  • 【Package Included】1X 16.4FT COB LED Light(No Power Supply or Controller), Please note that accessories recommended by Amazon system in the "Frequently Bought Together" box may not be accurate. Please double check the light specifications to ensure that the items you are buying together are compatible.

Full Specifications

BrandBTF-LIGHTING
ColorWarm White 2700K IP30
StyleModern
ThemeHome Ligting
Voltage12 Volts (DC)
Wattage20 watts
OccasionChristmas
Unit Count1.0 Count
Form FactorStrip Lights
Item Length16.4 Feet
Light ColorWarm White
ConnectivityBluetooth, WiFi
Model NumberFCOB-12V-336L-W-IP30
Power SourceDC
Material TypeFOB/COB FPCB
Product StyleModern
Control MethodRemote
Controller TypeRemote Control
Item Dimensions5.91 x 0.59 x 5.91 inches
Number of Items1
Full listing titleBTF-LIGHTING FCOB COB LED Strip Warm White 2700K, UL Listed 16.4FT DC12V Super Bright Uniform Light, CRI 90+ 8mm Width Flexible Tape Light for Home Indoor DIY Lighting(No Adapter or Controller)

Ready to buy?

BTF-LIGHTING FCOB COB LED Strip Warm White 2700K, UL Listed 16.4FT DC12V Super Bright Uniform Light, CRI 90+ 8mm Width Flexible Tape Light for Home Indoor DIY Lighting(No Adapter or Controller) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related RGB & Lighting

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →