Skip to main content
PCIE SATA 3.0 Controller Card 2 Ports,6 Gbit/s PCIE SATA Expansion Card,PCI-E 3.0 GEN3 JMicron + JMB582 Chip
YUNKOZAND

PCIE SATA 3.0 Controller Card 2 Ports,6 Gbit/s PCIE SATA Expansion Card,PCI-E 3.0 GEN3 JMicron + JMB582 Chip

Bottom line: The YUNKOZAND PCIE SATA 3.0 Controller Card 2 Ports: Adds 2 SATA 3.0 ports rated up to 6 Gbit/s; main trade-off: only 2 ports; larger drive arrays need a higher-port-count card.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ Adds 2 SATA 3.0 ports rated up to 6 Gbit/s
  • ✓ JMicron JMB582 controller on a PCIe 3.0 Gen3 interface
  • ✓ Supports AHCI and IDE modes for newer and legacy setups
  • ✓ x1 card fits x1, x4, x8 and x16 PCIe slots
  • ✓ Heatsink on the controller, plus 2 SATA cables in the box

Cons

  • ✗ Only 2 ports; larger drive arrays need a higher-port-count card
  • ✗ Both drives share a single PCIe x1 lane
  • ✗ Windows 11 and macOS are not in the listed supported systems
  • ✗ No RAID support mentioned in the product listing

Manufacturer description

Out of SATA ports? The YUNKOZAND PCIe SATA 3.0 controller card adds two 6 Gbit/s SATA ports to any desktop with a free PCIe slot. You can connect extra SSDs, hard drives or optical drives without replacing your motherboard. Two SATA cables come in the box, so you can wire up both drives right away. The card uses the JMicron JMB582 controller on a PCIe 3.0 Gen3 x1 interface. It supports both AHCI and IDE programming interfaces, which helps when you pair it with an older board or an operating system that expects legacy IDE behavior. The x1 connector also fits x4, x8 and x16 slots, so it works…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for YUNKOZAND PCIE SATA 3.0 Controller Card 2 Ports, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the expansion cards category before committing. On the listing's own facts, the case for it is "Adds 2 SATA 3.0 ports rated up to 6 Gbit/s"; the main trade-off is "Only 2 ports; larger drive arrays need a higher-port-count card". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, confirm the board side: this card needs a free PCIe slot of the width the card uses. Your motherboard manual lists which slots share lanes with M.2 sockets or other slots. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

How many drives can I connect to the YUNKOZAND PCIe SATA card?

Two. The card has 2 SATA 3.0 ports, each rated up to 6 Gbit/s, and comes with 2 SATA cables, so you can connect two SSDs, hard drives or optical drives.

Will this card fit in a PCIe x16 slot?

Yes. It is a PCIe x1 card, and the manufacturer lists it as compatible with PCIe x1, x4, x8 and x16 slots.

What controller chip does this SATA expansion card use?

It uses the JMicron JMB582 chipset on a PCIe 3.0 Gen3 interface. It supports both the AHCI and IDE programming interfaces.

Does it work with Windows XP or Linux?

Yes. Listed compatible systems are Windows XP, 7, 8 and 10, Windows Server 2003 and 2008, and Linux. Windows 11 and macOS are not on the list, so check with the seller before buying for those systems.

Can I hot-swap drives or boot from a drive on this card?

The manufacturer lists plug-and-play installation with hot-swap support. The listing does not say whether you can boot from a drive on the card, so check the product listing or contact the seller if you need a boot drive on it.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • ✅PCIE 3.0 GEN3 SATA 2-port expansion card, provides 2 SATA 3.0 ports and 2 SATA cables, and supports SATA 3.0 version transfer speeds up to 6 Gbit/s.
  • ✅【Product Chip: PCI-E 3.0 GEN3 Chipset: JMICRON + JMB582, improve the stability and compatibility of PCIE SATA card. Support IDE/AHCI programming interface.
  • ✅【Simple installation, plug and play, support hot swap. Just plug it in and start working.
  • ✅PCIE 1X SATA card, compatible with PCIE1X/4X/8X/16 slots. The card also features a heatsink for long-lasting high temperature resistance.
  • ✅Compatible system: Windows7/8/10/XP/2003/2008/Linux. Please let us know if you have any questions.

Full Specifications

BrandYUNKOZAND
StyleClassic
Style NameClassic
Model NumberPCIE 1X SATA 2 puertos
CompatibilityLinux
Mfr Part NumberSATA CARD
Number of Items1
Compatible DevicesPersonal Computer, Server
Hardware InterfacePCIE x 1
✅【Product ChipPCI-E 3.0 GEN3 Chipset: JMICRON + JMB582, improve the stability and compatibility of PCIE SATA card. Support IDE/AHCI programming interface.
Warranty Description90DAY
✅Compatible systemWindows7/8/10/XP/2003/2008/Linux. Please let us know if you have any questions.

Ready to buy?

PCIE SATA 3.0 Controller Card 2 Ports,6 Gbit/s PCIE SATA Expansion Card,PCI-E 3.0 GEN3 JMicron + JMB582 Chip is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Expansion Cards

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →