EZDIY-FAB [20cm PCIE 3.0 16x Extreme High Speed Riser Cable PCI Express Port GPU Extension Card-Right Angle Connector
Bottom line: The EZDIY-FAB [20cm PCIE 3.0 16x Extreme High Speed Riser Cable PCI: Pure copper tinned core delivers full-speed, low-attenuation PCIe 3.0 x16 signal; main trade-off: no PCIe 4.0 support; tops out at 3.0 signaling.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Pure copper tinned core delivers full-speed, low-attenuation PCIe 3.0 x16 signal
- ✓ EMI-shielded braid cuts interference to hold 16x bandwidth
- ✓ Flexible sectional cable bends for vertical GPU mounts and better airflow
- ✓ Right-angle 90° connector simplifies routing in cramped cases
Cons
- ✗ No PCIe 4.0 support; tops out at 3.0 signaling
- ✗ Short 20cm run limits GPU placement in larger cases
- ✗ Right-angle-only variant won't fit every mount orientation
- ✗ 16x cards on 3.0 boards gain no extra bandwidth headroom
SpecPicks Verdict
SpecPicks scored EZDIY-FAB [20cm PCIE 3.0 16x Extreme High Speed Riser Cable PCI… using a rating × review-volume × price-fit model applied to published specs and reviews across the expansion cards category. EZDIY-FAB's expansion cards lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for expansion cards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Imported cable and the core is made of pure copper tinning process, which ensures the signal is full speed, stable and almost no attenuation transmission.
- EMI (electromagnetic interference) shielded to eliminate signal interference and ensure maximum performance.
- Flexible sectional cable design allows for installing in various orientations and better airflow.
- Supports PCIE3.0/2.0/1.0, Doesn't Support PCIE4.0
- Available in straight (180°), right angled (90°) connector variations with wide compatibility mounting hole.
Full Specifications
| Brand | EZDIY-FAB |
|---|---|
| Color | black |
| Model | EZDPC150-6 |
| Cable Type | PCI Express |
| Item Shape | Round |
| Model Name | EZDPC150-6 |
| Unit Count | 1 Count |
| Item Length | 20 centimeters |
| Part Number | JP-V2 20CM RISER-90 |
| Connector Type | Pcie |
| Number of Pins | 164 |
| Outer Material | Plastic |
| Number of Items | 16 |
| Special Feature | High Speed |
| Connector Gender | Male-to-Male |
| Compatible Devices | Graphics card, sound card, SSD |
| Data Transfer Rate | 16 gigabits_per_second |
| Indoor Outdoor Usage | Indoor |
| Customer Package Type | Standard Packaging |
| Compatible Phone Models | No Compatible Phone Models |
Ready to buy?
EZDIY-FAB [20cm PCIE 3.0 16x Extreme High Speed Riser Cable PCI Express Port GPU Extension Card-Right Angle Connector is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Expansion Cards
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- CompactFlash Boot Drive for Windows 98: Transcend CF133 Setup and Benchmarks
- 1998 3dfx Voodoo2 SLI Build Guide: Period-Correct Glide Gaming with a CompactFlash Boot Drive
- Running Windows XP Off a 2.5-inch SATA SSD via an IDE Adapter (2026 Guide)
- VibeThinker-3B Local: 3B Reasoning Model on an RTX 3060 12GB
- Have Qwen Said Anything About Further Qwen 3.6 Models?
- Intel Arc B50 for Stable Diffusion: Setup & Performance
- Adafruit Reverse-Engineers the Creative Katana V2X Soundbar
- PCI vs ISA Serial Cards on Windows 98 and DOS: Which Chipsets Actually Work
- Intel Arc Pro B70 vLLM Support Lands — vs RTX 3060 12GB
- LG UltraGear 52G930B 52-Inch 5K Gaming Monitor Review
- Build a Live ADS-B Flight Tracker on a Raspberry Pi 4 in 2026
- 3dfx Voodoo5 5500 PCI Boots in a Modern ASUS Z77 Board
- Best SSD for PS4 Pro in 2026: SATA Upgrades That Cut Load Times
- Hosting a Period-Correct LAN Party in 2026: Quake 3, UT99, and the Gear That Still Works
- Best CPU for Streaming and Gaming Under $300: Ryzen 7 5800X vs 5700X vs 5600G
- How to Install Windows 98 SE on a CompactFlash Boot Drive in 2026 (Retro PC Build Guide)
- Free Retro Game Emulator Online: 2026 Browser Guide
- NVIDIA GeForce GTX 10 Pascal GPUs: 10th Anniversary
- Prime Big Deal Days Prebuilt PCs: RTX 5060 vs 5060 Ti vs 5070
- Best Handheld Gaming PC Under $300 in 2026
- Best Internal SSDs for PC Gaming Builds (2026)
- IPEX-LLM + Ollama in Docker: Running Local Models on Intel GPUs
- Benchmarking Open Models for Agentic Tool Use on an RTX 3060
- Voodoo3 3000 Period-Correct Build Log: Quake 3 + UT99 LAN Rig for 1999
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090