Skip to main content
RGBZONE 10Pcs 4 Pin 10mm LED Strip Connectors and 32.8FT 4 Pin RGB Extension Cable Strip to Wire Quick Connection for 10mm Wide Waterproof or Non-Waterproof SMD RGB 5050 LED Strip Light(IP20/IP65)
RGBZONE

RGBZONE 10Pcs 4 Pin 10mm LED Strip Connectors and 32.8FT 4 Pin RGB Extension Cable Strip to Wire Quick Connection for 10mm Wide Waterproof or Non-Waterproof SMD RGB 5050 LED Strip Light(IP20/IP65)

Bottom line: The RGBZONE 10Pcs 4 Pin 10mm LED Strip Connectors and 32.8FT 4 Pin RGB: 10 connectors plus 32.8ft of 4 pin cable in one kit; main trade-off: fits 10mm strips only; not compatible with 8mm or 5mm widths.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ 10 connectors plus 32.8ft of 4 pin cable in one kit
  • ✓ Solderless: no stripping or soldering to join strip to wire
  • ✓ Works with 5V, 12V and 24V 10mm RGB 5050 strips
  • ✓ Clear PC housing lets you check pin alignment before closing
  • ✓ Covers strip-to-wire, L-corner, strip-to-strip and controller links

Cons

  • ✗ Fits 10mm strips only; not compatible with 8mm or 5mm widths
  • ✗ Won't work with IP67 tube-sealed waterproof strips
  • ✗ Rated to 2A per connector, limiting long high-draw runs
  • ✗ Covers must be pried open with a screwdriver, slowing installs

Manufacturer description

The RGBZONE 4 pin LED strip connector kit lets you join, extend and turn corners with 10mm wide SMD 5050 RGB light strips without soldering. In the box you get 10 strip-to-wire connectors, a 32.8ft bundle of 22 AWG 4 pin extension cable and a small screwdriver for opening the connector covers. The kit works with 10mm strips running at 5V, 12V or 24V, in both IP20 (bare) and IP65 (silicone-coated) versions. The connectors are rated for 0-36V and up to 2A. The cable uses multi-strand copper cores in upgraded PVC jacketing for low resistance and corrosion resistance. The connector housings are…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for RGBZONE 10Pcs 4 Pin 10mm LED Strip Connectors and 32.8FT 4 Pin RGB…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the rgb & lighting category before committing. On the listing's own facts, the case for it is "10 connectors plus 32.8ft of 4 pin cable in one kit"; the main trade-off is "Fits 10mm strips only; not compatible with 8mm or 5mm widths". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will these connectors fit my 8mm or 5mm LED strip?

No. RGBZONE specifies these connectors for 10mm wide 4 pin SMD RGB strips only. They are not suitable for 8mm or 5mm strips, so measure your strip's width before you buy.

Do they work with waterproof LED strips?

They work with IP20 (non-waterproof) and IP65 (silicone-coated) 10mm strips. They are not compatible with IP67 strips, which are sealed inside a silicone tube.

What voltage and current can the connectors handle?

The connectors are rated for 0-36V and 0-2A. They support 10mm RGB strips running at 5V, 12V or 24V. Keep the current through each connector at or below 2A.

What's included and how long is the cable?

You get 10 4 pin 10mm strip-to-wire connectors, one 32.8ft bundle of 22 AWG 4 pin extension cable, and a screwdriver for opening the connector covers.

Do I need to solder or strip wires to use them?

No soldering or stripping is needed. Pry open the connector cover with the included screwdriver, seat the strip and wire on the pins, and close the cover. You can open the connectors again later to reposition or reuse them.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • What You Get: 10 pcs 4 pin 10mm strip to wire connectors,1 bundle 32.8ft 22 awg 4 pin extension cable and a screwdriver
  • Applicable Light Strip: Our 4 pin LED strip connectors and cable work with 10mm Wide 5V, 12V, 24V SMD RGB LED light strips(only for IP20 and IP65, not for IP67)
  • Premium Material: 4 pin wire is made of multiple copper cores and upgraded PVC material, has high conductivity, low resistance, and corrosion resistance. LED connector is made of PC material , which is durable, transparent and beautiful
  • Easy to Use: This 4pin led connector kit is easy to connect LED light strips to wires without peeling or soldering, and can be used multiple times, just carefully pry open the cover of the connector with a screwdriver
  • Notice: Please confirm that your RGB SMD light strip has a width of 10mm and is not suitable for 8mm or 5mm light strips. Voltage: 0-36V; Current: 0-2A
  • More DIY Connection: It cand be use for strip to wire connection, L-shape corner connection, strip to strip connection, LED strip to controller connection,ect.

Full Specifications

BrandRGBZONE
ColorTransparent
Gauge20
Model0501
NoticePlease confirm that your RGB SMD light strip has a width of 10mm and is not suitable for 8mm or 5mm light strips. Voltage: 0-36V; Current: 0-2A
StrandsMulti Strand
MaterialPolyvinyl Chloride
Unit Count1 Count
Part Number0501
What You Get10 pcs 4 pin 10mm strip to wire connectors,1 bundle 32.8ft 22 awg 4 pin extension cable and a screwdriver
CompatibilityPC
Material TypePolyvinyl Chloride
Maximum Current2 A
Number Of Wires4
Number of Items10
Number of Packs10
Included Components10Pcs 4pin led connectors and 1 bundle 32.8ft(10M) 4pin extension wire
More DIY ConnectionIt cand be use for strip to wire connection, L-shape corner connection, strip to strip connection, LED strip to controller connection,ect.
Applicable Light StripOur 4 pin LED strip connectors and cable work with 10mm Wide 5V, 12V, 24V SMD RGB LED light strips(only for IP20 and IP65, not for IP67)
Number of Cable StrandsMulti Strand

Ready to buy?

RGBZONE 10Pcs 4 Pin 10mm LED Strip Connectors and 32.8FT 4 Pin RGB Extension Cable Strip to Wire Quick Connection for 10mm Wide Waterproof or Non-Waterproof SMD RGB 5050 LED Strip Light(IP20/IP65) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related RGB & Lighting

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →